[Sun Aug 26 10:19:22 2012] Detection parameters:
  Position = (340.3, 308.0) = 8 9 19.79 -47 20 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.4 +/- 22.7
  Background counts = 50.0
  Rate = 0.01 +/- 0.0009

[Sun Aug 26 10:19:24 2012] Off-axis axis estimate = 3.12'
[Sun Aug 26 10:23:17 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 10:23:17 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Sun Aug 26 10:23:17 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.916
[Sun Aug 26 10:23:17 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 7.99"
[Sun Aug 26 13:36:23 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src77.ximg exists
[Sun Aug 26 13:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src77.csv
[Sun Aug 26 13:36:23 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src77_1.ximg exists
[Sun Aug 26 13:36:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src77.csv
[Sun Aug 26 13:36:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 13:36:25 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Sun Aug 26 13:36:25 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Sun Aug 26 13:36:25 2012] Fit fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Sun Aug 26 16:14:18 2012] Spatial fit model total counts = 1017.090000, observed total counts = 976.000000
[Sun Aug 26 16:14:18 2012] Offset between fit and detection position for source 82 = 0.162935 pixels
[Sun Aug 26 16:14:18 2012] 1003.540000 total counts/ 835.624000 bgd. counts: snr = 5.808803
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 0.162935 pixels
  Position = (340.4, 307.9) = 8 9 19.75 -47 20 48.1
  Extent = 5.3 (4.2-6.4)", rotation angle = 0
  Source counts = 167.9 +/- 31.7
  Background counts = 835.6
  Rate = 0.006 +/- 0.001
[Sun Aug 26 16:14:18 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 16:14:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 16:14:18 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 16:14:18 2012] Source does appear to be extended
[Sun Aug 26 16:14:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 16:14:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 16:14:51 2012] Initial guess for spatial extent in simple fitting = 5.26"
[Sun Aug 26 16:14:51 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.026
[Sun Aug 26 16:14:51 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 5.26"
[Sun Aug 26 19:25:23 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src67.ximg exists
[Sun Aug 26 19:25:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src67.csv
[Sun Aug 26 19:25:23 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src67_1.ximg exists
[Sun Aug 26 19:25:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src67.csv
[Sun Aug 26 19:25:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 19:25:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sun Aug 26 19:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sun Aug 26 19:25:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sun Aug 26 19:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src67.csv
[Sun Aug 26 19:25:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 21:21:27 2012] Warning, spatial fit 67 centroid is now closest to src. 29
[Sun Aug 26 21:21:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 21:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 21:21:27 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 21:21:27 2012] Source does appear to be extended
[Sun Aug 26 21:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 21:21:59 2012] XMMSAS src. selection expression = ellipse(29570.373000, 26738.269800, 315.695409, 315.695409, 0.000000, X, Y)
[Sun Aug 26 21:21:59 2012] Writing source region out to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src82_src.reg
[Sun Aug 26 21:21:59 2012] Extracting stamp from image fullrun_pn_xmm0112670501_pi300-10000_cl_sm2.00.img.gz, (322, 290) - (359, 326)
[Sun Aug 26 21:21:59 2012] XMMSAS bgd. selection expression = annulus(29570.373000, 26738.269800, 526.159015, 1052.318030, X, Y) && !ellipse(27092.670680, 27461.768800, 1446.559242, 1446.559242, 0.000000, X, Y) && !ellipse(29491.117004, 25173.449951, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 26 21:21:59 2012] Writing fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src82.gif
[Sun Aug 26 22:28:38 2012] Mean detx,y = (2580.55, 629.43) 
[Sun Aug 26 22:28:41 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 22:28:54 2012] grppha failed
[Sun Aug 26 22:28:54 2012] Setting source spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src82_src.pi.gz
[Sun Aug 26 22:28:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Sun Aug 26 23:12:50 2012] Updating aperture counts using extracted products
[Sun Aug 26 23:12:50 2012] Error reading totcts from fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src82_src.pi.gz
[Sun Aug 26 23:12:50 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 23:12:55 2012] Source 82 has no response, skipping
[Sun Aug 26 23:12:56 2012] xmm0112670501/analysis//spectral/fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src82_pl.csv not found, spectral fit skipped or did not complete