[Sun Aug 26 10:19:20 2012] Detection parameters:
  Position = (330.6, 275.3) = 8 9 23.96 -47 23 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1727.8 +/- 51.4
  Background counts = 51.0
  Rate = 0.07 +/- 0.002

[Sun Aug 26 10:19:24 2012] Off-axis axis estimate = 2.87'
[Sun Aug 26 10:23:17 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 10:23:17 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Sun Aug 26 10:23:17 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.173
[Sun Aug 26 10:23:17 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.86"
[Sun Aug 26 13:36:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src28.ximg exists
[Sun Aug 26 13:36:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Aug 26 13:36:22 2012] Fit fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src28 appears to have run properly
[Sun Aug 26 13:36:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Aug 26 13:36:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Aug 26 13:36:24 2012] Fit fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Aug 26 16:14:17 2012] Spatial fit model total counts = 2081.000000, observed total counts = 2081.000000
[Sun Aug 26 16:14:17 2012] Offset between fit and detection position for source 32 = 0.199682 pixels
[Sun Aug 26 16:14:17 2012] 2066.077000 total counts/ 831.597000 bgd. counts: snr = 42.808263
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.199682 pixels
  Position = (330.6, 275.5) = 8 9 23.95 -47 23 9.1
  Extent = 5.6 (5.3-5.9)", rotation angle = 0
  Source counts = 1234.5 +/- 45.5
  Background counts = 831.6
  Rate = 0.04 +/- 0.002
[Sun Aug 26 16:14:18 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 16:14:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 16:14:18 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 16:14:18 2012] Source does appear to be extended
[Sun Aug 26 16:14:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 16:14:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 16:14:51 2012] Initial guess for spatial extent in simple fitting = 5.60"
[Sun Aug 26 16:14:51 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.704
[Sun Aug 26 16:14:51 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 5.60"
[Sun Aug 26 19:25:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src27.ximg exists
[Sun Aug 26 19:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src27.csv
[Sun Aug 26 19:25:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Aug 26 19:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src27.csv
[Sun Aug 26 19:25:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 19:25:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Aug 26 19:25:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Aug 26 19:25:24 2012] Fit fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Aug 26 21:21:27 2012] Spatial fit model total counts = 2131.980000, observed total counts = 2132.000000
[Sun Aug 26 21:21:27 2012] Offset between fit and detection position for source 32 = 0.005865 pixels
[Sun Aug 26 21:21:27 2012] 2101.434000 total counts/ 872.824000 bgd. counts: snr = 41.586341
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.005865 pixels
  Position = (330.6, 275.5) = 8 9 23.96 -47 23 9.1
  Extent = 5.6 (5.3-5.9)", rotation angle = 0
  Source counts = 1228.6 +/- 45.8
  Background counts = 872.8
  Rate = 0.04 +/- 0.002
[Sun Aug 26 21:21:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 21:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 21:21:27 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 21:21:27 2012] Source does appear to be extended
[Sun Aug 26 21:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 21:21:58 2012] Counts = 1228.610000, rescaling region sizes by 2.000000
[Sun Aug 26 21:21:58 2012] XMMSAS src. selection expression = ellipse(28713.386400, 23919.162200, 667.360819, 667.360819, 0.000000, X, Y)
[Sun Aug 26 21:21:58 2012] Writing source region out to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src32_src.reg
[Sun Aug 26 21:21:58 2012] Extracting stamp from image fullrun_pn_xmm0112670501_pi300-10000_cl_sm2.00.img.gz, (292, 237) - (369, 314)
[Sun Aug 26 21:21:58 2012] XMMSAS bgd. selection expression = annulus(28713.386400, 23919.162200, 2224.536064, 4449.072128, X, Y) && !ellipse(24369.963745, 26303.918945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27092.670680, 27461.768800, 1446.559242, 1446.559242, 0.000000, X, Y) && !ellipse(26826.521637, 29094.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.151062, 27857.456238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23473.543549, 27449.091492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31498.183746, 27188.752594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24496.669708, 26814.536835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25704.301400, 25798.043060, 805.912023, 685.250420, -0.000000, X, Y) && !ellipse(29491.117004, 25173.449951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31616.300690, 21851.315338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33527.093414, 19892.020538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29882.646210, 29201.137360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.016876, 28027.951599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32151.857269, 26913.595978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29570.373000, 26738.269800, 420.927212, 420.927212, 0.000000, X, Y) && !ellipse(33156.467255, 26473.514252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33547.524000, 26396.905800, 1509.584043, 1509.584043, 0.000000, X, Y) && !ellipse(27106.311279, 25273.456940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.881400, 24846.404740, 980.104028, 980.104028, 0.000000, X, Y) && !ellipse(27988.179260, 24046.899780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.509979, 24047.298035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.591000, 23897.092600, 818.280024, 818.280024, 0.000000, X, Y) && !ellipse(27076.577606, 23004.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23547.079895, 21497.711899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30579.864868, 20328.147598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.679400, 20831.059800, 688.243220, 688.243220, 0.000000, X, Y) && !ellipse(31550.968384, 19811.002319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.796814, 19641.371170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.460000, 19314.591200, 1471.912042, 408.903212, 90.017533, X, Y) && !ellipse(27035.762800, 18997.480000, 1347.096039, 1347.096039, 0.000000, X, Y)
[Sun Aug 26 21:21:58 2012] Writing fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src32.gif
[Sun Aug 26 22:01:52 2012] Mean detx,y = (1724.43, 3451.38) 
[Sun Aug 26 22:01:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 22:02:37 2012] grppha failed
[Sun Aug 26 22:02:38 2012] Setting source spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src32_src.pi.gz
[Sun Aug 26 22:02:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sun Aug 26 23:12:49 2012] Updating aperture counts using extracted products
[Sun Aug 26 23:12:49 2012] Error reading totcts from fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src32_src.pi.gz
[Sun Aug 26 23:12:50 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 23:12:55 2012] Source 32 has no response, skipping
[Sun Aug 26 23:12:56 2012] xmm0112670501/analysis//spectral/fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete