[Sun Aug 26 10:19:19 2012] Detection parameters:
  Position = (282.1, 308.8) = 8 9 44.71 -47 20 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2104.0 +/- 57.1
  Background counts = 45.6
  Rate = 0.1 +/- 0.003

[Sun Aug 26 10:19:24 2012] Off-axis axis estimate = 1.40'
[Sun Aug 26 10:23:17 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 10:23:17 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Sun Aug 26 10:23:17 2012] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.656
[Sun Aug 26 10:23:17 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.13"
[Sun Aug 26 13:36:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src23.ximg exists
[Sun Aug 26 13:36:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src23.csv
[Sun Aug 26 13:36:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Aug 26 13:36:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src23.csv
[Sun Aug 26 13:36:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 13:36:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Aug 26 13:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Aug 26 13:36:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Aug 26 13:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Aug 26 13:36:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 16:14:17 2012] Warning, spatial fit 23 centroid is now closest to src. 1
[Sun Aug 26 16:14:18 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 16:14:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 16:14:18 2012] Assessing source extent using major
[Sun Aug 26 16:14:18 2012] Source does appear to be extended
[Sun Aug 26 16:14:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 16:14:18 2012] Source is confused with source 1
[Sun Aug 26 16:14:51 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 16:14:51 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Sun Aug 26 16:14:51 2012] source mask rpix=1.6, npix_max = 18, mask sum = 12, frac = 0.656
[Sun Aug 26 16:14:51 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 7.13"
[Sun Aug 26 19:25:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src22.ximg exists
[Sun Aug 26 19:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src22.csv
[Sun Aug 26 19:25:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Aug 26 19:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src22.csv
[Sun Aug 26 19:25:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 19:25:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Aug 26 19:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Aug 26 19:25:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Aug 26 19:25:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sun Aug 26 19:25:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 21:21:27 2012] Spatial fit model total counts = 8243.270000, observed total counts = 5061.000000
[Sun Aug 26 21:21:27 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 26 21:21:27 2012] Warning, spatial fit 22 centroid is now closest to src. 1
[Sun Aug 26 21:21:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 21:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 21:21:27 2012] Assessing source extent using major
[Sun Aug 26 21:21:27 2012] Source does appear to be extended
[Sun Aug 26 21:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 21:21:57 2012] Counts = 2104.019531, rescaling region sizes by 2.000000
[Sun Aug 26 21:21:57 2012] XMMSAS src. selection expression = ellipse(24496.669708, 26814.536835, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Aug 26 21:21:57 2012] Writing source region out to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src26_src.reg
[Sun Aug 26 21:21:57 2012] Extracting stamp from image fullrun_pn_xmm0112670501_pi300-10000_cl_sm2.00.img.gz, (207, 234) - (357, 384)
[Sun Aug 26 21:21:58 2012] XMMSAS bgd. selection expression = annulus(24496.669708, 26814.536835, 4350.000000, 8700.000000, X, Y) && !ellipse(24369.963745, 26303.918945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21464.562800, 20391.626800, 473.697614, 473.697614, 0.000000, X, Y) && !ellipse(27092.670680, 27461.768800, 1446.559242, 1446.559242, 0.000000, X, Y) && !ellipse(17566.970230, 34742.913635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21705.360413, 32731.537781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30096.997345, 32570.897888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22672.650700, 32333.809400, 390.660011, 390.660011, 0.000000, X, Y) && !ellipse(26103.502000, 31203.747400, 387.486411, 387.486411, 0.000000, X, Y) && !ellipse(22887.008000, 31045.432000, 337.208810, 337.208810, 0.000000, X, Y) && !ellipse(32062.231445, 29248.564148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26826.521637, 29094.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26285.071400, 29032.674400, 476.423214, 476.423214, 0.000000, X, Y) && !ellipse(24984.249908, 29432.122253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.151062, 27857.456238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23473.543549, 27449.091492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31498.183746, 27188.752594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22557.024780, 25637.326050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25704.301400, 25798.043060, 805.912023, 685.250420, -0.000000, X, Y) && !ellipse(29491.117004, 25173.449951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23313.376251, 23802.342377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28713.386400, 23919.162200, 444.907213, 444.907213, 0.000000, X, Y) && !ellipse(31616.300690, 21851.315338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15222.104172, 20127.394000, 701.267286, 453.469467, 89.694879, X, Y) && !ellipse(33527.093414, 19892.020538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32870.944800, 35204.852200, 662.716819, 662.716819, 0.000000, X, Y) && !ellipse(21571.802000, 33200.664000, 290.135208, 290.135208, 0.000000, X, Y) && !ellipse(33450.832120, 32726.642800, 589.284817, 589.284817, 0.000000, X, Y) && !ellipse(30775.803375, 32679.379730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21548.319412, 32067.730011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23282.107971, 31615.697998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28581.672180, 31396.991600, 411.251212, 411.251212, 0.000000, X, Y) && !ellipse(33299.002600, 31150.212000, 436.814413, 436.814413, 0.000000, X, Y) && !ellipse(30591.382385, 30863.480408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29062.822600, 30638.249000, 484.091214, 484.091214, 0.000000, X, Y) && !ellipse(21292.281662, 30144.235626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23046.368177, 29925.012116, 526.004450, 374.757647, 354.138290, X, Y) && !ellipse(33364.767578, 29676.663727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29882.646210, 29201.137360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28297.922943, 29365.101349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.016876, 28027.951599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18941.052765, 27974.866943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21839.552800, 27537.547200, 378.741611, 378.741611, 0.000000, X, Y) && !ellipse(32151.857269, 26913.595978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29570.373000, 26738.269800, 420.927212, 420.927212, 0.000000, X, Y) && !ellipse(33156.467255, 26473.514252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33547.524000, 26396.905800, 1509.584043, 1509.584043, 0.000000, X, Y) && !ellipse(27106.311279, 25273.456940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.881400, 24846.404740, 980.104028, 980.104028, 0.000000, X, Y) && !ellipse(27988.179260, 24046.899780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.509979, 24047.298035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.591000, 23897.092600, 818.280024, 818.280024, 0.000000, X, Y) && !ellipse(27076.577606, 23004.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23547.079895, 21497.711899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30579.864868, 20328.147598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.679400, 20831.059800, 688.243220, 688.243220, 0.000000, X, Y) && !ellipse(31550.968384, 19811.002319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.796814, 19641.371170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.460000, 19314.591200, 1471.912042, 408.903212, 90.017533, X, Y) && !ellipse(27035.762800, 18997.480000, 1347.096039, 1347.096039, 0.000000, X, Y) && !ellipse(16851.892517, 18987.372406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27040.649750, 18049.228424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23297.363770, 17937.900391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.613129, 17438.952682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22557.412415, 17439.617767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25340.432709, 17454.529739, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 26 21:21:58 2012] Writing fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src26.gif
[Sun Aug 26 21:53:47 2012] Mean detx,y = (-2436.41, 535.03) 
[Sun Aug 26 21:53:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 21:56:14 2012] grppha failed
[Sun Aug 26 21:56:15 2012] Setting source spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src26_src.pi.gz
[Sun Aug 26 21:56:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun Aug 26 22:49:32 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 26 22:49:32 2012] rmf not generated due to insufficient counts
[Sun Aug 26 23:12:49 2012] Updating aperture counts using extracted products
[Sun Aug 26 23:12:49 2012] Error reading totcts from fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src26_src.pi.gz
[Sun Aug 26 23:12:50 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 23:12:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 26 23:12:56 2012] xmm0112670501/analysis//spectral/fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete