[Sun Aug 26 10:19:19 2012] Detection parameters:
  Position = (303.0, 334.1) = 8 9 35.77 -47 18 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1833.6 +/- 53.9
  Background counts = 45.4
  Rate = 0.08 +/- 0.002

[Sun Aug 26 10:19:24 2012] Off-axis axis estimate = 2.61'
[Sun Aug 26 10:23:17 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 10:23:17 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Sun Aug 26 10:23:17 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.771
[Sun Aug 26 10:23:17 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.73"
[Sun Aug 26 13:36:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src20.ximg exists
[Sun Aug 26 13:36:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src20.csv
[Sun Aug 26 13:36:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Aug 26 13:36:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src20.csv
[Sun Aug 26 13:36:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 13:36:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Aug 26 13:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Aug 26 13:36:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Aug 26 13:36:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun Aug 26 13:36:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 16:14:17 2012] Spatial fit model total counts = 5004.400000, observed total counts = 3845.000000
[Sun Aug 26 16:14:17 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 26 16:14:17 2012] Warning, spatial fit 20 centroid is now closest to src. 22
[Sun Aug 26 16:14:18 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 16:14:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 16:14:18 2012] Assessing source extent using major
[Sun Aug 26 16:14:18 2012] Source does appear to be extended
[Sun Aug 26 16:14:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 16:14:18 2012] Source is confused with source 20
[Sun Aug 26 16:14:51 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 16:14:51 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Sun Aug 26 16:14:51 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.771
[Sun Aug 26 16:14:51 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 7.73"
[Sun Aug 26 19:25:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src19.ximg exists
[Sun Aug 26 19:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src19.csv
[Sun Aug 26 19:25:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Aug 26 19:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src19.csv
[Sun Aug 26 19:25:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 19:25:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Aug 26 19:25:24 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Aug 26 19:25:24 2012] Fit fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sun Aug 26 21:21:27 2012] Spatial fit model total counts = 3957.530000, observed total counts = 3645.000000
[Sun Aug 26 21:21:27 2012] Offset between fit and detection position for source 21 = 0.341188 pixels
[Sun Aug 26 21:21:27 2012] 2976.360000 total counts/ 1679.250000 bgd. counts: snr = 31.653310
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.341188 pixels
  Position = (302.7, 334.3) = 8 9 35.91 -47 18 53.4
  Extent = 6.0 (5.6-6.4)", rotation angle = 0
  Source counts = 1297.1 +/- 54.6
  Background counts = 1679.2
  Rate = 0.05 +/- 0.002
[Sun Aug 26 21:21:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 21:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 21:21:27 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 21:21:27 2012] Source does appear to be extended
[Sun Aug 26 21:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 21:21:57 2012] Counts = 1297.110000, rescaling region sizes by 2.000000
[Sun Aug 26 21:21:57 2012] XMMSAS src. selection expression = ellipse(26285.071400, 29032.674400, 714.634821, 714.634821, 0.000000, X, Y)
[Sun Aug 26 21:21:57 2012] Writing source region out to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src21_src.reg
[Sun Aug 26 21:21:57 2012] Extracting stamp from image fullrun_pn_xmm0112670501_pi300-10000_cl_sm2.00.img.gz, (262, 293) - (344, 375)
[Sun Aug 26 21:21:57 2012] XMMSAS bgd. selection expression = annulus(26285.071400, 29032.674400, 2382.116069, 4764.232137, X, Y) && !ellipse(24369.963745, 26303.918945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27092.670680, 27461.768800, 1446.559242, 1446.559242, 0.000000, X, Y) && !ellipse(21705.360413, 32731.537781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30096.997345, 32570.897888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22672.650700, 32333.809400, 390.660011, 390.660011, 0.000000, X, Y) && !ellipse(26103.502000, 31203.747400, 387.486411, 387.486411, 0.000000, X, Y) && !ellipse(22887.008000, 31045.432000, 337.208810, 337.208810, 0.000000, X, Y) && !ellipse(26826.521637, 29094.968048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.249908, 29432.122253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25003.151062, 27857.456238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23473.543549, 27449.091492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31498.183746, 27188.752594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24496.669708, 26814.536835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22557.024780, 25637.326050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25704.301400, 25798.043060, 805.912023, 685.250420, -0.000000, X, Y) && !ellipse(29491.117004, 25173.449951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23313.376251, 23802.342377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28713.386400, 23919.162200, 444.907213, 444.907213, 0.000000, X, Y) && !ellipse(21571.802000, 33200.664000, 290.135208, 290.135208, 0.000000, X, Y) && !ellipse(30775.803375, 32679.379730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21548.319412, 32067.730011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23282.107971, 31615.697998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28581.672180, 31396.991600, 411.251212, 411.251212, 0.000000, X, Y) && !ellipse(30591.382385, 30863.480408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29062.822600, 30638.249000, 484.091214, 484.091214, 0.000000, X, Y) && !ellipse(21292.281662, 30144.235626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23046.368177, 29925.012116, 526.004450, 374.757647, 354.138290, X, Y) && !ellipse(29882.646210, 29201.137360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28297.922943, 29365.101349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.016876, 28027.951599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21839.552800, 27537.547200, 378.741611, 378.741611, 0.000000, X, Y) && !ellipse(29570.373000, 26738.269800, 420.927212, 420.927212, 0.000000, X, Y) && !ellipse(27106.311279, 25273.456940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26970.881400, 24846.404740, 980.104028, 980.104028, 0.000000, X, Y) && !ellipse(27988.179260, 24046.899780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.509979, 24047.298035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.591000, 23897.092600, 818.280024, 818.280024, 0.000000, X, Y)
[Sun Aug 26 21:21:57 2012] Writing fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src21.gif
[Sun Aug 26 21:45:24 2012] Mean detx,y = (-541.52, -1684.77) 
[Sun Aug 26 21:45:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 21:46:21 2012] grppha failed
[Sun Aug 26 21:46:22 2012] Setting source spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src21_src.pi.gz
[Sun Aug 26 21:46:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sun Aug 26 23:12:49 2012] Updating aperture counts using extracted products
[Sun Aug 26 23:12:49 2012] Error reading totcts from fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src21_src.pi.gz
[Sun Aug 26 23:12:50 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 23:12:55 2012] Flag p found in src. 21 procflags, skipping spectral fitting
[Sun Aug 26 23:12:55 2012] Flag c found in src. 21 procflags, skipping spectral fitting
[Sun Aug 26 23:12:55 2012] Source 21 has no response, skipping
[Sun Aug 26 23:12:56 2012] xmm0112670501/analysis//spectral/fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete