[Sun Aug 26 10:19:19 2012] Detection parameters:
  Position = (325.1, 167.0) = 8 9 26.26 -47 31 1.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2124.3 +/- 56.1
  Background counts = 31.6
  Rate = 0.08 +/- 0.002

[Sun Aug 26 10:19:24 2012] Off-axis axis estimate = 9.72'
[Sun Aug 26 10:23:17 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 10:23:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 26 10:23:17 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Sun Aug 26 10:23:17 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Sun Aug 26 10:23:17 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.29"
[Sun Aug 26 13:36:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src2.ximg exists
[Sun Aug 26 13:36:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src2.csv
[Sun Aug 26 13:36:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Aug 26 13:36:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src2.csv
[Sun Aug 26 13:36:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 13:36:23 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Aug 26 13:36:23 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Aug 26 13:36:23 2012] Fit fullrun_pn_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Aug 26 16:14:17 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.289768 pixels away
[Sun Aug 26 16:14:18 2012] Source 2 is offset by 3.692416 and -7.418577 pixels which is larger than
2 X fitted extent = 1.305871 x 1.305871, not incorporating fit results
[Sun Aug 26 16:14:18 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 16:14:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 16:14:18 2012] Assessing source extent using major
[Sun Aug 26 16:14:18 2012] Source does appear to be extended
[Sun Aug 26 16:14:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 16:14:51 2012] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 16:14:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 26 16:14:51 2012] Initial guess for spatial extent in simple fitting = 11.29"
[Sun Aug 26 16:14:51 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.939
[Sun Aug 26 16:14:51 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.29"
[Sun Aug 26 19:25:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src2.ximg exists
[Sun Aug 26 19:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src2.csv
[Sun Aug 26 19:25:22 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Aug 26 19:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src2.csv
[Sun Aug 26 19:25:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 19:25:23 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Aug 26 19:25:23 2012] fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Aug 26 19:25:23 2012] Fit fullrun_pn_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Aug 26 21:21:27 2012] Warning, spatial fit 2 centroid is now closest to src. 117
[Sun Aug 26 21:21:27 2012] Source 2 is offset by 3.856232 and 8.311584 pixels which is larger than
2 X fitted extent = 1.285398 x 1.285398, not incorporating fit results
[Sun Aug 26 21:21:27 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 21:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 21:21:27 2012] Assessing source extent using major
[Sun Aug 26 21:21:27 2012] Source does appear to be extended
[Sun Aug 26 21:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 21:21:56 2012] Counts = 2124.304688, rescaling region sizes by 2.000000
[Sun Aug 26 21:21:56 2012] XMMSAS src. selection expression = ellipse(28238.628174, 14482.971832, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Aug 26 21:21:56 2012] Writing source region out to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug 26 21:21:56 2012] Extracting stamp from image fullrun_pn_xmm0112670501_pi300-10000_cl_sm2.00.img.gz, (250, 92) - (400, 242)
[Sun Aug 26 21:21:56 2012] XMMSAS bgd. selection expression = annulus(28238.628174, 14482.971832, 4350.000000, 8700.000000, X, Y) && !ellipse(21464.562800, 20391.626800, 473.697614, 473.697614, 0.000000, X, Y) && !ellipse(23313.376251, 23802.342377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31616.300690, 21851.315338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33527.093414, 19892.020538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24079.471680, 13728.125763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.179260, 24046.899780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.509979, 24047.298035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27130.591000, 23897.092600, 818.280024, 818.280024, 0.000000, X, Y) && !ellipse(27076.577606, 23004.591034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27042.885284, 14131.249481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23547.079895, 21497.711899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30579.864868, 20328.147598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27071.679400, 20831.059800, 688.243220, 688.243220, 0.000000, X, Y) && !ellipse(31550.968384, 19811.002319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25259.796814, 19641.371170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.460000, 19314.591200, 1471.912042, 408.903212, 90.017533, X, Y) && !ellipse(27035.762800, 18997.480000, 1347.096039, 1347.096039, 0.000000, X, Y) && !ellipse(27040.649750, 18049.228424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23297.363770, 17937.900391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.613129, 17438.952682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22557.412415, 17439.617767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25340.432709, 17454.529739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27058.711914, 16738.914383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27046.781400, 16510.089000, 769.096022, 769.096022, 0.000000, X, Y) && !ellipse(27056.152466, 15696.531296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27069.112000, 15279.682740, 589.829617, 589.829617, 0.000000, X, Y) && !ellipse(34266.882812, 14975.912537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19239.900208, 14915.873032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27053.154938, 14561.815582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27031.763367, 13357.734573, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 26 21:21:56 2012] Writing fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src2.gif
[Sun Aug 26 21:25:34 2012] Mean detx,y = (1154.39, 12904.07) 
[Sun Aug 26 21:25:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 21:26:51 2012] grppha failed
[Sun Aug 26 21:26:51 2012] Setting source spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Aug 26 21:26:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug 26 22:49:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 26 22:49:29 2012] rmf not generated due to insufficient counts
[Sun Aug 26 23:12:48 2012] Updating aperture counts using extracted products
[Sun Aug 26 23:12:48 2012] Error reading totcts from fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Aug 26 23:12:50 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 23:12:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 26 23:12:56 2012] xmm0112670501/analysis//spectral/fullrun_pn_xmm0112670501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete