[Sun Aug 26 10:20:31 2012] Detection parameters:
  Position = (152.3, 389.6) = 8 10 40.16 -47 14 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.0 +/- 6.8
  Background counts = 7.3
  Rate = 0.0009 +/- 0.0002

[Sun Aug 26 10:20:32 2012] Off-axis axis estimate = 12.49'
[Sun Aug 26 14:50:23 2012] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 14:50:23 2012] Initial guess for spatial extent in simple fitting = 12.67"
[Sun Aug 26 14:50:23 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.901
[Sun Aug 26 14:50:23 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 12.67"
[Sun Aug 26 16:13:56 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src44.ximg exists
[Sun Aug 26 16:13:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src44.csv
[Sun Aug 26 16:13:56 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src44_1.ximg exists
[Sun Aug 26 16:13:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src44.csv
[Sun Aug 26 16:13:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 16:13:57 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Sun Aug 26 16:13:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sun Aug 26 16:13:57 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Sun Aug 26 16:13:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src44.csv
[Sun Aug 26 16:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 16:14:34 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.601502 pixels away
[Sun Aug 26 16:14:34 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 16:14:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 16:14:34 2012] Assessing source extent using major
[Sun Aug 26 16:14:34 2012] Source does appear to be extended
[Sun Aug 26 16:14:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 16:14:34 2012] Deleting source due to low Poisson probability 0.8