[Sun Aug 26 10:20:31 2012] Detection parameters:
  Position = (256.6, 396.2) = 8 9 55.59 -47 14 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.2 +/- 7.8
  Background counts = 9.3
  Rate = 0.002 +/- 0.0005

[Sun Aug 26 10:20:32 2012] Off-axis axis estimate = 7.71'
[Sun Aug 26 14:50:23 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 14:50:23 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Sun Aug 26 14:50:23 2012] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.762
[Sun Aug 26 14:50:23 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.28"
[Sun Aug 26 16:13:56 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src33.ximg exists
[Sun Aug 26 16:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src33.csv
[Sun Aug 26 16:13:56 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Aug 26 16:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src33.csv
[Sun Aug 26 16:13:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 16:13:57 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Aug 26 16:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Aug 26 16:13:57 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Aug 26 16:13:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun Aug 26 16:13:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 16:14:34 2012] Spatial fit model total counts = 128.611000, observed total counts = 88.000000
[Sun Aug 26 16:14:34 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 26 16:14:34 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 16:14:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 16:14:34 2012] Assessing source extent using major
[Sun Aug 26 16:14:34 2012] Source does appear to be extended
[Sun Aug 26 16:14:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 16:14:34 2012] Deleting source due to low Poisson probability 0.9