[Sun Aug 26 10:20:30 2012] Detection parameters:
  Position = (312.1, 316.1) = 8 9 31.89 -47 20 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52329.0 +/- 272.4
  Background counts = 16.9
  Rate = 2 +/- 0.009

[Sun Aug 26 10:20:32 2012] Off-axis axis estimate = 1.62'
[Sun Aug 26 14:50:23 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 14:50:23 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Aug 26 14:50:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Sun Aug 26 14:50:23 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sun Aug 26 16:13:55 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 26 16:13:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 26 16:13:55 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 26 16:13:55 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src1.csv
[Sun Aug 26 16:13:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 16:13:56 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 26 16:13:56 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 26 16:13:56 2012] Fit fullrun_mos2_xmm0112670501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 26 16:14:34 2012] Spatial fit model total counts = 47996.100000, observed total counts = 45152.000000
[Sun Aug 26 16:14:34 2012] Offset between fit and detection position for source 2 = 0.173123 pixels
[Sun Aug 26 16:14:34 2012] 48239.800000 total counts/ 13035.500000 bgd. counts: snr = 308.341419
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.173123 pixels
  Position = (311.9, 316.1) = 8 9 31.96 -47 20 12.3
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 35204.3 +/- 219.6
  Background counts = 13035.5
  Rate = 1 +/- 0.007
[Sun Aug 26 16:14:34 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 16:14:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 16:14:34 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 16:14:34 2012] Source does appear to be extended
[Sun Aug 26 16:14:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 20:23:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 20:23:31 2012] Initial guess for spatial extent in simple fitting = 5.17"
[Sun Aug 26 20:23:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.403
[Sun Aug 26 20:23:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.17"
[Sun Aug 26 21:21:06 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 26 21:21:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass1_src1.csv
[Sun Aug 26 21:21:06 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 26 21:21:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670501_pi300-10000_cl_pass1_src1.csv
[Sun Aug 26 21:21:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 21:21:07 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 26 21:21:07 2012] fullrun_mos2_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 26 21:21:07 2012] Fit fullrun_mos2_xmm0112670501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 26 21:21:40 2012] Spatial fit model total counts = 47954.300000, observed total counts = 45152.000000
[Sun Aug 26 21:21:40 2012] Offset between fit and detection position for source 2 = 0.000064 pixels
[Sun Aug 26 21:21:40 2012] 48196.600000 total counts/ 12994.200000 bgd. counts: snr = 308.814369
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000064 pixels
  Position = (311.9, 316.1) = 8 9 31.96 -47 20 12.3
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 35202.4 +/- 219.5
  Background counts = 12994.2
  Rate = 1 +/- 0.007
[Sun Aug 26 21:21:40 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 21:21:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 21:21:40 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 21:21:40 2012] Source does appear to be extended
[Sun Aug 26 21:21:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 23:02:35 2012] Counts = 35202.400000, rescaling region sizes by 3.000000
[Sun Aug 26 23:02:35 2012] XMMSAS src. selection expression = ellipse(27087.586440, 27455.343800, 931.780827, 931.780827, 0.000000, X, Y)
[Sun Aug 26 23:02:35 2012] Writing source region out to fullrun_mos2_xmm0112670501_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug 26 23:02:35 2012] Extracting stamp from image fullrun_mos2_xmm0112670501_pi300-10000_cl_sm2.00.img.gz, (258, 263) - (365, 370)
[Sun Aug 26 23:02:35 2012] XMMSAS bgd. selection expression = annulus(27087.586440, 27455.343800, 4658.904134, 9317.808268, X, Y) && !ellipse(21494.866000, 20377.049400, 684.101620, 420.629612, 32.927000, X, Y) && !ellipse(30468.236816, 20275.994858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35168.829071, 24135.197600, 507.476984, 404.577508, 304.003626, X, Y) && !ellipse(33527.033532, 19893.819365, 565.959867, 411.369768, 324.908763, X, Y) && !ellipse(34877.770538, 33528.487305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36262.463898, 37505.182220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35406.909627, 32312.444686, 451.912504, 254.384496, 28.952355, X, Y) && !ellipse(23350.477900, 17952.660200, 436.530413, 436.530413, 0.000000, X, Y) && !ellipse(17566.544098, 34764.499023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36466.518000, 31493.586000, 1808.048052, 1808.048052, 0.000000, X, Y)
[Sun Aug 26 23:02:35 2012] Writing fullrun_mos2_xmm0112670501_pi300-10000_pass1_cl_src2.gif
[Sun Aug 26 23:02:42 2012] Mean detx,y = (42.27, -74.42) 
[Sun Aug 26 23:02:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 23:04:51 2012] grppha failed
[Sun Aug 26 23:04:52 2012] Setting source spectrum file to fullrun_mos2_xmm0112670501_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Aug 26 23:04:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112670501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug 26 23:12:51 2012] Updating aperture counts using extracted products
[Sun Aug 26 23:12:51 2012] Error reading totcts from fullrun_mos2_xmm0112670501_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Aug 26 23:12:51 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 23:12:54 2012] Source 2 has no response, skipping
[Sun Aug 26 23:12:55 2012] xmm0112670501/analysis//spectral/fullrun_mos2_xmm0112670501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete