[Mon Aug  6 10:14:41 2012] Detection parameters:
  Position = (348.6, 210.9) = 8 9 9.80 -47 24 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1391.8 +/- 45.5
  Background counts = 30.0
  Rate = 0.2 +/- 0.007

[Mon Aug  6 10:14:43 2012] Off-axis axis estimate = 7.31'
[Mon Aug  6 10:17:46 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Mon Aug  6 10:17:46 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Mon Aug  6 10:17:46 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.944
[Mon Aug  6 10:17:46 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.08"
[Mon Aug  6 12:17:56 2012] fullrun_pn_xmm0112670401_pi300-10000_cl_pass0_src33.ximg exists
[Mon Aug  6 12:17:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670401_pi300-10000_cl_pass0_src33.csv
[Mon Aug  6 12:17:56 2012] fullrun_pn_xmm0112670401_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Aug  6 12:17:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670401_pi300-10000_cl_pass0_src33.csv
[Mon Aug  6 12:17:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 12:17:57 2012] fullrun_pn_xmm0112670401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Aug  6 12:17:57 2012] fullrun_pn_xmm0112670401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Aug  6 12:17:57 2012] Fit fullrun_pn_xmm0112670401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Aug  6 13:38:15 2012] Spatial fit model total counts = 1557.280000, observed total counts = 1506.000000
[Mon Aug  6 13:38:15 2012] Offset between fit and detection position for source 34 = 0.113199 pixels
[Mon Aug  6 13:38:15 2012] 1563.763000 total counts/ 557.203000 bgd. counts: snr = 42.641546
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.113199 pixels
  Position = (348.5, 210.8) = 8 9 9.83 -47 24 53.1
  Extent = 5.8 (5.4-6.1)", rotation angle = 0
  Source counts = 1006.6 +/- 39.5
  Background counts = 557.2
  Rate = 0.08 +/- 0.003
[Mon Aug  6 13:38:16 2012] Vigneting correction estimate = 1.000000
[Mon Aug  6 13:38:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  6 13:38:16 2012] Assessing source extent using major axis lower bound
[Mon Aug  6 13:38:16 2012] Source does appear to be extended
[Mon Aug  6 13:38:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  6 13:38:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug  6 13:38:47 2012] Initial guess for spatial extent in simple fitting = 5.76"
[Mon Aug  6 13:38:47 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.901
[Mon Aug  6 13:38:47 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 5.76"
[Mon Aug  6 15:22:43 2012] fullrun_pn_xmm0112670401_pi300-10000_cl_pass1_src32.ximg exists
[Mon Aug  6 15:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670401_pi300-10000_cl_pass1_src32.csv
[Mon Aug  6 15:22:43 2012] fullrun_pn_xmm0112670401_pi300-10000_cl_pass1_src32_1.ximg exists
[Mon Aug  6 15:22:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670401_pi300-10000_cl_pass1_src32.csv
[Mon Aug  6 15:22:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670401_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670401_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug  6 15:22:45 2012] fullrun_pn_xmm0112670401_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Mon Aug  6 15:22:45 2012] fullrun_pn_xmm0112670401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Mon Aug  6 15:22:45 2012] Fit fullrun_pn_xmm0112670401_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Mon Aug  6 16:17:44 2012] Spatial fit model total counts = 1557.160000, observed total counts = 1506.000000
[Mon Aug  6 16:17:44 2012] Offset between fit and detection position for source 34 = 0.000001 pixels
[Mon Aug  6 16:17:44 2012] 1563.643000 total counts/ 557.203000 bgd. counts: snr = 42.636463
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.000001 pixels
  Position = (348.5, 210.8) = 8 9 9.83 -47 24 53.1
  Extent = 5.8 (5.4-6.1)", rotation angle = 0
  Source counts = 1006.4 +/- 39.5
  Background counts = 557.2
  Rate = 0.08 +/- 0.003
[Mon Aug  6 16:17:44 2012] Vigneting correction estimate = 1.000000
[Mon Aug  6 16:17:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug  6 16:17:44 2012] Assessing source extent using major axis lower bound
[Mon Aug  6 16:17:44 2012] Source does appear to be extended
[Mon Aug  6 16:17:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug  6 16:18:03 2012] Counts = 1006.440000, rescaling region sizes by 2.000000
[Mon Aug  6 16:18:03 2012] XMMSAS src. selection expression = ellipse(30271.195000, 18295.248400, 691.732820, 691.732820, 0.000000, X, Y)
[Mon Aug  6 16:18:03 2012] Writing source region out to fullrun_pn_xmm0112670401_pi300-10000_pass1_cl_src34_src.reg
[Mon Aug  6 16:18:03 2012] Extracting stamp from image fullrun_pn_xmm0112670401_pi300-10000_cl_sm2.00.img.gz, (309, 171) - (388, 251)
[Mon Aug  6 16:18:03 2012] XMMSAS bgd. selection expression = annulus(30271.195000, 18295.248400, 2305.776066, 4611.552133, X, Y) && !ellipse(30136.703308, 23735.148895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.405000, 21628.969400, 442.105613, 442.105613, 0.000000, X, Y) && !ellipse(27272.502000, 20289.164200, 510.262415, 510.262415, 0.000000, X, Y) && !ellipse(32183.194580, 16332.329834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28203.528200, 23168.653600, 363.590410, 363.590410, 0.000000, X, Y) && !ellipse(31901.122000, 22944.206000, 1503.896043, 1503.896043, 0.000000, X, Y) && !ellipse(25412.798187, 21095.723206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33873.882721, 20563.342041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26601.454803, 20416.629105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25859.342255, 20256.335693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30191.957123, 16337.677063, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug  6 16:18:03 2012] Writing fullrun_pn_xmm0112670401_pi300-10000_pass1_cl_src34.gif
[Mon Aug  6 16:35:50 2012] Mean detx,y = (-137.03, -7244.93) 
[Mon Aug  6 16:35:51 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug  6 16:36:46 2012] Binned source spectrum to 10 counts/bin
[Mon Aug  6 16:36:46 2012] Setting source spectrum file to fullrun_pn_xmm0112670401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Aug  6 16:36:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112670401_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Mon Aug  6 19:22:29 2012] Updating aperture counts using extracted products
[Mon Aug  6 19:22:29 2012] Error reading totcts from fullrun_pn_xmm0112670401_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Mon Aug  6 19:22:31 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug  6 19:22:31 2012] Using photon index=1.80, rate=0.0843, arf fullrun_pn_xmm0112670401_pi300-10000_pass1_cl_src34.arf
[Mon Aug  6 19:22:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug  6 19:22:31 2012] Updating source flux to 4.2e-13