[Sat Jul 28 22:02:06 2012] Detection parameters:
  Position = (250.5, 208.8) = 8 9 49.75 -47 25 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.2 +/- 13.4
  Background counts = 10.7
  Rate = 0.02 +/- 0.002

[Sat Jul 28 22:02:07 2012] Off-axis axis estimate = 7.37'
[Sat Jul 28 22:04:01 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 22:04:01 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Sat Jul 28 22:04:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940
[Sat Jul 28 22:04:01 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 10.12"
[Sun Jul 29 00:45:20 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src58.ximg exists
[Sun Jul 29 00:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src58.csv
[Sun Jul 29 00:45:20 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src58_1.ximg exists
[Sun Jul 29 00:45:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src58.csv
[Sun Jul 29 00:45:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 00:45:21 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sun Jul 29 00:45:21 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sun Jul 29 00:45:21 2012] Fit fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Sun Jul 29 02:12:09 2012] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 13.668812 pixels away
[Sun Jul 29 02:12:10 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 02:12:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 02:12:10 2012] Assessing source extent using major
[Sun Jul 29 02:12:10 2012] Source does appear to be extended
[Sun Jul 29 02:12:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 02:12:33 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 02:12:33 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Sun Jul 29 02:12:33 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.940
[Sun Jul 29 02:12:33 2012] Giving source the simple spatial ID 56 for pass 1, mean size = 10.12"
[Sun Jul 29 04:42:39 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_src56.ximg exists
[Sun Jul 29 04:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_src56.csv
[Sun Jul 29 04:42:39 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_src56_1.ximg exists
[Sun Jul 29 04:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_src56.csv
[Sun Jul 29 04:42:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 04:42:40 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Sun Jul 29 04:42:40 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Sun Jul 29 04:42:40 2012] Fit fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src56 appears to have run properly
[Sun Jul 29 05:49:50 2012] Spatial fit model total counts = 185.000000, observed total counts = 185.000000
[Sun Jul 29 05:49:50 2012] Offset between fit and detection position for source 63 = 0.150948 pixels
[Sun Jul 29 05:49:50 2012] 184.661600 total counts/ 108.643000 bgd. counts: snr = 7.293215
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.150948 pixels
  Position = (250.6, 208.6) = 8 9 49.71 -47 25 7.8
  Extent = 5.1 (4.3-6.4)", rotation angle = 0
  Source counts = 76.0 +/- 13.6
  Background counts = 108.6
  Rate = 0.009 +/- 0.002
[Sun Jul 29 05:49:50 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 05:49:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 05:49:50 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 05:49:50 2012] Source does appear to be extended
[Sun Jul 29 05:49:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 05:50:13 2012] XMMSAS src. selection expression = ellipse(21751.667200, 18102.956600, 307.721957, 307.721957, 0.000000, X, Y)
[Sun Jul 29 05:50:13 2012] Writing source region out to fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src63_src.reg
[Sun Jul 29 05:50:13 2012] Extracting stamp from image fullrun_pn_xmm0112670201_pi300-10000_cl_sm2.00.img.gz, (233, 191) - (268, 226)
[Sun Jul 29 05:50:13 2012] XMMSAS bgd. selection expression = annulus(21751.667200, 18102.956600, 512.869929, 1025.739857, X, Y)
[Sun Jul 29 05:50:13 2012] Writing fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src63.gif
[Sun Jul 29 06:29:58 2012] Mean detx,y = (5664.03, -4295.89) 
[Sun Jul 29 06:30:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 06:30:13 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 06:30:13 2012] Setting source spectrum file to fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sun Jul 29 06:30:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sun Jul 29 07:57:06 2012] Not generating rmf since there are only 76 counts
[Sun Jul 29 07:57:06 2012] rmf not generated due to insufficient counts
[Sun Jul 29 09:06:46 2012] Updating aperture counts using extracted products
[Sun Jul 29 09:06:46 2012] Error reading totcts from fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sun Jul 29 09:06:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:06:47 2012] Using photon index=1.80, rate=0.00857, arf fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src63.arf
[Sun Jul 29 09:06:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:06:47 2012] Updating source flux to 4.8e-14
[Sun Jul 29 09:08:04 2012] Source 63 has fewer than 100.000000 counts, skipping spectral fitting