[Sat Jul 28 22:02:05 2012] Detection parameters:
  Position = (265.7, 299.1) = 8 9 43.21 -47 18 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1714.5 +/- 50.8
  Background counts = 24.0
  Rate = 0.2 +/- 0.007

[Sat Jul 28 22:02:07 2012] Off-axis axis estimate = 2.38'
[Sat Jul 28 22:04:01 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sat Jul 28 22:04:01 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sat Jul 28 22:04:01 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.987
[Sat Jul 28 22:04:01 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.62"
[Sun Jul 29 00:45:19 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src2.ximg exists
[Sun Jul 29 00:45:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src2.csv
[Sun Jul 29 00:45:19 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Jul 29 00:45:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src2.csv
[Sun Jul 29 00:45:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 00:45:20 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Jul 29 00:45:20 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Jul 29 00:45:20 2012] Fit fullrun_pn_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Jul 29 02:12:09 2012] Warning, spatial fit 2 centroid is now closest to src. 86
[Sun Jul 29 02:12:09 2012] Spatial fit model total counts = 591.061000, observed total counts = 1572.000000
[Sun Jul 29 02:12:09 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul 29 02:12:10 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 02:12:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 02:12:10 2012] Assessing source extent using major
[Sun Jul 29 02:12:10 2012] Source does appear to be extended
[Sun Jul 29 02:12:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 02:12:33 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 02:12:33 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sun Jul 29 02:12:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.987
[Sun Jul 29 02:12:33 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.62"
[Sun Jul 29 04:42:38 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_src2.ximg exists
[Sun Jul 29 04:42:38 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Jul 29 04:42:38 2012] Fit fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Jul 29 04:42:39 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Jul 29 04:42:39 2012] fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Jul 29 04:42:39 2012] Fit fullrun_pn_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Jul 29 05:49:49 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 11.022440 pixels away
[Sun Jul 29 05:49:50 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 05:49:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 05:49:50 2012] Assessing source extent using major
[Sun Jul 29 05:49:50 2012] Source does appear to be extended
[Sun Jul 29 05:49:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 05:50:11 2012] Counts = 1714.507935, rescaling region sizes by 2.000000
[Sun Jul 29 05:50:11 2012] XMMSAS src. selection expression = ellipse(23065.454926, 25973.043884, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul 29 05:50:11 2012] Writing source region out to fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src2_src.reg
[Sun Jul 29 05:50:11 2012] Extracting stamp from image fullrun_pn_xmm0112670201_pi300-10000_cl_sm2.00.img.gz, (191, 224) - (341, 374)
[Sun Jul 29 05:50:11 2012] XMMSAS bgd. selection expression = annulus(23065.454926, 25973.043884, 4350.000000, 8700.000000, X, Y) && !ellipse(25295.118000, 24045.709000, 1410.880841, 1410.880841, 0.000000, X, Y) && !ellipse(21554.872200, 33793.530000, 2178.680063, 620.402418, 62.732400, X, Y) && !ellipse(20874.695999, 28917.779358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24314.815240, 27795.456000, 351.189610, 351.189610, 0.000000, X, Y) && !ellipse(21081.425873, 27651.550751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24495.448960, 25639.650000, 447.693613, 447.693613, 0.000000, X, Y) && !ellipse(25021.159580, 25690.789000, 395.636011, 395.636011, 0.000000, X, Y) && !ellipse(23213.110400, 24422.865600, 431.608812, 431.608812, 0.000000, X, Y) && !ellipse(29692.984192, 23787.832642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22692.601196, 23395.674194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23833.674377, 22712.354614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20766.648254, 22150.361908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23857.805939, 21991.231400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27680.084351, 21779.656097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23033.257385, 20630.523575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26918.274139, 20498.605789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29835.984070, 18369.886932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19663.541992, 16992.076736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31750.000000, 16663.007095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.907288, 16404.072708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20691.912000, 35911.218000, 1424.376041, 1424.376041, 0.000000, X, Y) && !ellipse(20883.197536, 35321.355848, 1673.776048, 351.384358, 69.605647, X, Y) && !ellipse(21418.082000, 34068.828000, 1673.776048, 504.901615, 62.139000, X, Y) && !ellipse(21967.176000, 32559.402000, 1489.520043, 1489.520043, 0.000000, X, Y) && !ellipse(22343.216800, 31545.572400, 478.389614, 478.389614, 0.000000, X, Y) && !ellipse(15774.320999, 31340.111267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28944.900482, 29276.115387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23297.503600, 29148.378400, 2534.000073, 433.033612, 68.632000, X, Y) && !ellipse(28257.398000, 29156.844000, 311.410409, 311.410409, 0.000000, X, Y) && !ellipse(31507.628400, 27741.030400, 419.224012, 419.224012, 0.000000, X, Y) && !ellipse(24119.828125, 27100.302948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.604355, 26522.597778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.888800, 25813.004200, 420.818412, 420.818412, 0.000000, X, Y) && !ellipse(21552.916595, 23844.549377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31773.744180, 23014.983000, 632.376018, 632.376018, 0.000000, X, Y) && !ellipse(25404.693400, 20450.405200, 408.229612, 408.229612, 0.000000, X, Y) && !ellipse(21516.592320, 20452.805200, 419.142412, 419.142412, 0.000000, X, Y) && !ellipse(21751.667200, 18102.956600, 410.295943, 410.295943, 0.000000, X, Y) && !ellipse(22200.174240, 32050.251953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22433.208000, 31516.842000, 1506.576043, 1506.576043, 0.000000, X, Y) && !ellipse(22781.638000, 30653.044000, 1398.960040, 1398.960040, 0.000000, X, Y) && !ellipse(23402.918400, 28949.950000, 1310.184038, 1310.184038, 0.000000, X, Y) && !ellipse(26772.698883, 28019.922791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23803.415009, 27873.665192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19719.751440, 26879.107400, 368.115211, 368.115211, 0.000000, X, Y) && !ellipse(31542.258500, 26252.321600, 752.060822, 313.476809, 68.301561, X, Y) && !ellipse(28035.308685, 25861.216705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26552.610229, 25959.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22017.471054, 24639.961639, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 29 05:50:11 2012] Writing fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src2.gif
[Sun Jul 29 05:53:35 2012] Mean detx,y = (1548.56, 2458.82) 
[Sun Jul 29 05:53:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 05:56:30 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 05:56:31 2012] Setting source spectrum file to fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 29 05:56:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jul 29 06:49:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jul 29 06:49:59 2012] rmf not generated due to insufficient counts
[Sun Jul 29 09:06:45 2012] Updating aperture counts using extracted products
[Sun Jul 29 09:06:45 2012] Error reading totcts from fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 29 09:06:46 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:06:46 2012] Using photon index=1.80, rate=0.227, arf fullrun_pn_xmm0112670201_pi300-10000_pass1_cl_src2.arf
[Sun Jul 29 09:06:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:06:46 2012] Updating source flux to 7e-13
[Sun Jul 29 09:08:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting