[Sat Jul 28 22:02:55 2012] Detection parameters:
  Position = (291.3, 277.0) = 8 9 32.26 -47 20 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24920.1 +/- 186.5
  Background counts = 11.5
  Rate = 2 +/- 0.01

[Sat Jul 28 22:02:56 2012] Off-axis axis estimate = 1.64'
[Sun Jul 29 01:32:16 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 01:32:16 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jul 29 01:32:16 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sun Jul 29 01:32:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sun Jul 29 02:11:51 2012] fullrun_mos2_xmm0112670201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 29 02:11:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 02:11:51 2012] fullrun_mos2_xmm0112670201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 29 02:11:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 02:11:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 02:11:51 2012] fullrun_mos2_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 29 02:11:51 2012] fullrun_mos2_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 29 02:11:51 2012] Fit fullrun_mos2_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 29 02:12:20 2012] Spatial fit model total counts = 19286.300000, observed total counts = 20829.000000
[Sun Jul 29 02:12:20 2012] Offset between fit and detection position for source 2 = 0.134617 pixels
[Sun Jul 29 02:12:20 2012] 20287.025000 total counts/ 582.125000 bgd. counts: snr = 816.706684
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.134617 pixels
  Position = (291.3, 276.9) = 8 9 32.24 -47 20 11.1
  Extent = 6.8 (6.8-6.8)", rotation angle = 0
  Source counts = 19704.9 +/- 142.4
  Background counts = 582.1
  Rate = 1 +/- 0.01
[Sun Jul 29 02:12:20 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 02:12:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 02:12:20 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 02:12:20 2012] Source does appear to be extended
[Sun Jul 29 02:12:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 05:14:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 29 05:14:31 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Sun Jul 29 05:14:31 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.940
[Sun Jul 29 05:14:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.80"
[Sun Jul 29 05:49:34 2012] fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 29 05:49:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 05:49:34 2012] fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 29 05:49:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 05:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 05:49:34 2012] fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 29 05:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 29 05:49:34 2012] fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 29 05:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jul 29 05:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 05:49:58 2012] Warning, spatial fit 1 centroid is now closest to src. 19
[Sun Jul 29 05:49:58 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 05:49:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 05:49:58 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 05:49:58 2012] Source does appear to be extended
[Sun Jul 29 05:49:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 08:39:03 2012] Counts = 19704.900000, rescaling region sizes by 3.000000
[Sun Jul 29 08:39:03 2012] XMMSAS src. selection expression = ellipse(25296.659200, 24039.166200, 1223.782235, 1223.782235, 0.000000, X, Y)
[Sun Jul 29 08:39:03 2012] Writing source region out to fullrun_mos2_xmm0112670201_pi300-10000_pass1_cl_src2_src.reg
[Sun Jul 29 08:39:03 2012] Extracting stamp from image fullrun_mos2_xmm0112670201_pi300-10000_cl_sm2.00.img.gz, (221, 207) - (362, 347)
[Sun Jul 29 08:39:03 2012] XMMSAS bgd. selection expression = annulus(25296.659200, 24039.166200, 6118.911176, 12237.822352, X, Y) && !ellipse(19660.267014, 16987.188828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26466.457184, 11085.750336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29795.967468, 18389.194305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31734.781200, 16504.328000, 397.216811, 397.216811, 0.000000, X, Y) && !ellipse(33559.050600, 35648.372400, 645.468019, 289.759208, 236.195801, X, Y) && !ellipse(29771.834000, 16413.190000, 328.357609, 328.357609, 0.000000, X, Y) && !ellipse(37689.202000, 28812.262000, 375.062411, 375.062411, 0.000000, X, Y) && !ellipse(31498.284637, 27772.431580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36176.419708, 14287.203247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13436.642044, 16753.005951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19931.400400, 29483.573600, 858.440025, 858.440025, 0.000000, X, Y) && !ellipse(15718.739800, 31322.128200, 475.745614, 475.745614, 0.000000, X, Y) && !ellipse(24450.403168, 23525.526367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33556.408200, 28982.608000, 779.127222, 210.348006, 25.482606, X, Y) && !ellipse(38228.136078, 29024.623047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21801.426010, 33816.650909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17178.378828, 24571.979922, 243.745607, 243.745607, 0.000000, X, Y) && !ellipse(17516.241000, 11350.602000, 519.441615, 519.441615, 0.000000, X, Y) && !ellipse(34502.091858, 34054.342407, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 29 08:39:03 2012] Writing fullrun_mos2_xmm0112670201_pi300-10000_pass1_cl_src2.gif
[Sun Jul 29 08:39:07 2012] Mean detx,y = (-33.65, -101.80) 
[Sun Jul 29 08:39:08 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 08:41:58 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 08:41:58 2012] Setting source spectrum file to fullrun_mos2_xmm0112670201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 29 08:41:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112670201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jul 29 09:06:48 2012] Updating aperture counts using extracted products
[Sun Jul 29 09:06:48 2012] Error reading totcts from fullrun_mos2_xmm0112670201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 29 09:06:48 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:06:48 2012] Using photon index=1.80, rate=1.5, arf fullrun_mos2_xmm0112670201_pi300-10000_pass1_cl_src2.arf
[Sun Jul 29 09:06:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:06:48 2012] Updating source flux to 1.8e-11
[Sun Jul 29 09:08:04 2012] Reading fit data from xmm0112670201/analysis//spectral/fullrun_mos2_xmm0112670201_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jul 29 09:08:04 2012] Spectral fit parameter nH value = 1.1682e+22
[Sun Jul 29 09:08:04 2012] Spectral fit parameter PhoIndex value = 3.29397
[Sun Jul 29 09:08:04 2012] Failed to get F(0.3-8.0) from xmm0112670201/analysis//spectral/fullrun_mos2_xmm0112670201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jul 29 09:08:04 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:08:04 2012] Using Nh = 1.2e+22, photon index=3.29, rate=1.5, arf fullrun_mos2_xmm0112670201_pi300-10000_pass1_cl_src2.arf
[Sun Jul 29 09:08:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:08:04 2012] Updating source flux to 1.7e-11