[Sat Jul 28 22:02:31 2012] Detection parameters:
  Position = (291.3, 277.0) = 8 9 32.24 -47 20 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24758.0 +/- 188.9
  Background counts = 10.0
  Rate = 2 +/- 0.01

[Sat Jul 28 22:02:32 2012] Off-axis axis estimate = 1.64'
[Sun Jul 29 00:45:22 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 00:45:22 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jul 29 00:45:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Sun Jul 29 00:45:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sun Jul 29 01:32:15 2012] fullrun_mos1_xmm0112670201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 29 01:32:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112670201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 01:32:15 2012] fullrun_mos1_xmm0112670201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 29 01:32:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112670201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 01:32:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112670201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112670201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 01:32:16 2012] fullrun_mos1_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 29 01:32:16 2012] fullrun_mos1_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 29 01:32:16 2012] Fit fullrun_mos1_xmm0112670201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 29 02:12:15 2012] Spatial fit model total counts = 20752.000000, observed total counts = 20752.000000
[Sun Jul 29 02:12:15 2012] Offset between fit and detection position for source 1 = 0.083655 pixels
[Sun Jul 29 02:12:15 2012] 20801.840000 total counts/ 4418.940000 bgd. counts: snr = 246.451649
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.083655 pixels
  Position = (291.2, 277.0) = 8 9 32.28 -47 20 10.6
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 16382.9 +/- 144.2
  Background counts = 4418.9
  Rate = 1 +/- 0.01
[Sun Jul 29 02:12:15 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 02:12:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 02:12:15 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 02:12:15 2012] Source does appear to be extended
[Sun Jul 29 02:12:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 04:42:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 29 04:42:40 2012] Initial guess for spatial extent in simple fitting = 5.42"
[Sun Jul 29 04:42:40 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.985
[Sun Jul 29 04:42:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.42"
[Sun Jul 29 05:14:30 2012] fullrun_mos1_xmm0112670201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 29 05:14:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112670201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 05:14:30 2012] fullrun_mos1_xmm0112670201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 29 05:14:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112670201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 05:14:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112670201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112670201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 05:14:31 2012] fullrun_mos1_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 29 05:14:31 2012] fullrun_mos1_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 29 05:14:31 2012] Fit fullrun_mos1_xmm0112670201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 29 05:49:54 2012] Spatial fit model total counts = 20752.000000, observed total counts = 20752.000000
[Sun Jul 29 05:49:54 2012] Offset between fit and detection position for source 1 = 0.000005 pixels
[Sun Jul 29 05:49:54 2012] 20801.850000 total counts/ 4416.750000 bgd. counts: snr = 246.545845
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000005 pixels
  Position = (291.2, 277.0) = 8 9 32.28 -47 20 10.6
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 16385.1 +/- 144.2
  Background counts = 4416.8
  Rate = 1 +/- 0.01
[Sun Jul 29 05:49:54 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 05:49:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 05:49:54 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 05:49:54 2012] Source does appear to be extended
[Sun Jul 29 05:49:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 08:15:44 2012] Counts = 16385.100000, rescaling region sizes by 3.000000
[Sun Jul 29 08:15:44 2012] XMMSAS src. selection expression = ellipse(25290.067200, 24050.028600, 975.567628, 975.567628, 0.000000, X, Y)
[Sun Jul 29 08:15:44 2012] Writing source region out to fullrun_mos1_xmm0112670201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 29 08:15:44 2012] Extracting stamp from image fullrun_mos1_xmm0112670201_pi300-10000_cl_sm2.00.img.gz, (235, 221) - (347, 333)
[Sun Jul 29 08:15:44 2012] XMMSAS bgd. selection expression = annulus(25290.067200, 24050.028600, 4877.838140, 9755.676281, X, Y) && !ellipse(19679.590317, 16928.877747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19732.982956, 16944.000793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29789.042282, 18472.104789, 709.326894, 491.240380, 307.017768, X, Y) && !ellipse(29730.664800, 16409.499400, 503.016814, 503.016814, 0.000000, X, Y) && !ellipse(15090.814200, 15484.111800, 476.961614, 476.961614, 0.000000, X, Y) && !ellipse(19941.859421, 29417.317810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31738.329200, 16521.113000, 359.163210, 359.163210, 0.000000, X, Y) && !ellipse(31505.854000, 27694.760700, 673.249619, 673.249619, 0.000000, X, Y) && !ellipse(23474.061279, 16134.697418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15731.476791, 31325.389130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34494.660431, 34052.770630, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 29 08:15:44 2012] Writing fullrun_mos1_xmm0112670201_pi300-10000_pass1_cl_src1.gif
[Sun Jul 29 08:15:48 2012] Mean detx,y = (111.78, -117.31) 
[Sun Jul 29 08:15:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 08:18:46 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 08:18:46 2012] Setting source spectrum file to fullrun_mos1_xmm0112670201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 08:18:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112670201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 29 09:06:47 2012] Updating aperture counts using extracted products
[Sun Jul 29 09:06:47 2012] Error reading totcts from fullrun_mos1_xmm0112670201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 29 09:06:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:06:47 2012] Using photon index=1.80, rate=1.25, arf fullrun_mos1_xmm0112670201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 09:06:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:06:47 2012] Updating source flux to 1.4e-11
[Sun Jul 29 09:07:19 2012] Reading fit data from xmm0112670201/analysis//spectral/fullrun_mos1_xmm0112670201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 29 09:07:19 2012] Spectral fit parameter nH value = 1.17573e+22
[Sun Jul 29 09:07:19 2012] Spectral fit parameter PhoIndex value = 3.29848
[Sun Jul 29 09:07:19 2012] Failed to get F(0.3-8.0) from xmm0112670201/analysis//spectral/fullrun_mos1_xmm0112670201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 29 09:07:19 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 09:07:19 2012] Using Nh = 1.2e+22, photon index=3.30, rate=1.25, arf fullrun_mos1_xmm0112670201_pi300-10000_pass1_cl_src1.arf
[Sun Jul 29 09:07:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 09:07:19 2012] Updating source flux to 1.3e-11