[Wed Jun 13 06:33:42 2012] Detection parameters: Position = (298.1, 233.9) = 8 9 31.48 -47 23 12.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 55.2 +/- 10.2 Background counts = 11.0 Rate = 0.03 +/- 0.005 [Wed Jun 13 06:33:42 2012] Off-axis axis estimate = 4.68' [Wed Jun 13 06:35:01 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting [Wed Jun 13 06:35:01 2012] Initial guess for spatial extent in simple fitting = 8.77" [Wed Jun 13 06:35:01 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988 [Wed Jun 13 06:35:01 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.77" [Wed Jun 13 07:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src29.ximg exists [Wed Jun 13 07:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src29.csv [Wed Jun 13 07:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src29_1.ximg exists [Wed Jun 13 07:09:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src29.csv [Wed Jun 13 07:09:46 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src29_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 13 07:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists [Wed Jun 13 07:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists [Wed Jun 13 07:09:46 2012] Fit fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly [Wed Jun 13 07:35:45 2012] Spatial fit model total counts = 167.600000, observed total counts = 156.000000 [Wed Jun 13 07:35:45 2012] Offset between fit and detection position for source 30 = 8.866751 pixels [Wed Jun 13 07:35:45 2012] 168.028039 total counts/ 168.028000 bgd. counts: snr = 0.000003 Spatial fit parameters: Offset between fit and detection position for source 30 = 8.866751 pixels Position = (302.6, 241.5) = 8 9 29.54 -47 22 39.5 Extent = 17.5 (2.2-32.9)", rotation angle = 0 Source counts = 0.0 +/- 13.0 Background counts = 168.0 Rate = 1e-08 +/- 0.004 Deleting source due to low Poisson probability