[Wed Jun 13 06:33:42 2012] Detection parameters:
  Position = (296.6, 275.2) = 8 9 32.11 -47 20 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2916.5 +/- 64.4
  Background counts = 14.7
  Rate = 1 +/- 0.03

[Wed Jun 13 06:33:42 2012] Off-axis axis estimate = 1.69'
[Wed Jun 13 06:35:01 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 06:35:01 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jun 13 06:35:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Wed Jun 13 06:35:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Jun 13 07:09:45 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 07:09:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:09:45 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 07:09:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:09:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 07:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 07:09:46 2012] Fit fullrun_pn_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 07:35:45 2012] Source 1 is offset by 7.308473 and 5.913423 pixels which is larger than
2 X fitted extent = 0.835922 x 0.835922, not incorporating fit results
[Wed Jun 13 07:35:45 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.236793 pixels away
[Wed Jun 13 07:35:45 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:35:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:35:45 2012] Assessing source extent using major
[Wed Jun 13 07:35:45 2012] Source does appear to be extended
[Wed Jun 13 07:35:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 07:35:57 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:35:57 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jun 13 07:35:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Wed Jun 13 07:35:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Wed Jun 13 08:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 08:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 08:09:46 2012] Fit fullrun_pn_xmm0112670101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun 13 08:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 08:09:46 2012] fullrun_pn_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 08:09:46 2012] Fit fullrun_pn_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 08:34:22 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.444391 pixels away
[Wed Jun 13 08:34:22 2012] Source 1 is offset by 5.963554 and 6.568503 pixels which is larger than
2 X fitted extent = 1.457195 x 6.175450, not incorporating fit results
[Wed Jun 13 08:34:22 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 20.275586 pixels away
[Wed Jun 13 08:34:22 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 08:34:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 08:34:22 2012] Assessing source extent using major
[Wed Jun 13 08:34:22 2012] Source does appear to be extended
[Wed Jun 13 08:34:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 08:34:34 2012] Counts = 2916.488281, rescaling region sizes by 2.000000
[Wed Jun 13 08:34:34 2012] XMMSAS src. selection expression = ellipse(25757.535156, 23896.165802, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 13 08:34:34 2012] Writing source region out to fullrun_pn_xmm0112670101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 13 08:34:34 2012] Extracting stamp from image fullrun_pn_xmm0112670101_pi300-10000_cl_sm2.00.img.gz, (222, 200) - (372, 350)
[Wed Jun 13 08:34:34 2012] XMMSAS bgd. selection expression = annulus(25757.535156, 23896.165802, 4350.000000, 8700.000000, X, Y) && !ellipse(30268.602000, 18284.616800, 491.565614, 491.565614, 0.000000, X, Y) && !ellipse(23508.857600, 25843.321800, 444.042413, 444.042413, 0.000000, X, Y) && !ellipse(24961.302400, 25500.345600, 324.862409, 324.862409, 0.000000, X, Y) && !ellipse(23658.646200, 24317.990400, 441.408013, 441.408013, 0.000000, X, Y) && !ellipse(30113.482422, 23715.116699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23125.309906, 23270.672760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24267.466339, 22224.259338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22195.705200, 17959.985200, 481.608814, 481.608814, 0.000000, X, Y) && !ellipse(20121.599594, 16827.280396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20322.175440, 29223.135200, 710.962420, 495.688014, 86.046303, X, Y) && !ellipse(34099.446045, 28941.648071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28675.915300, 29040.768200, 347.602410, 347.602410, 0.000000, X, Y) && !ellipse(21301.640600, 28729.226000, 485.640814, 485.640814, 0.000000, X, Y) && !ellipse(27247.811066, 27837.543518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24766.961800, 27662.803400, 403.563212, 403.563212, 0.000000, X, Y) && !ellipse(21510.780440, 27490.829200, 322.481609, 322.481609, 0.000000, X, Y) && !ellipse(21731.572202, 26329.183714, 529.128995, 337.643538, 9.753189, X, Y) && !ellipse(30690.778717, 25700.343170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28501.353943, 25696.732330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25487.463000, 25561.513400, 378.057611, 378.057611, 0.000000, X, Y) && !ellipse(20487.175888, 23983.579987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28168.267000, 21658.994400, 374.917611, 374.917611, 0.000000, X, Y) && !ellipse(23480.364319, 20482.244171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21969.586273, 20331.605774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.804718, 20372.396317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32184.907667, 16359.960200, 567.920016, 567.920016, 0.000000, X, Y)
[Wed Jun 13 08:34:34 2012] Writing fullrun_pn_xmm0112670101_pi300-10000_pass1_cl_src1.gif
[Wed Jun 13 08:34:40 2012] Mean detx,y = (230.28, -55.75) 
[Wed Jun 13 08:34:42 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 08:36:48 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 08:36:48 2012] Setting source spectrum file to fullrun_pn_xmm0112670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 08:36:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 13 08:45:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 08:45:18 2012] rmf not generated due to insufficient counts
[Wed Jun 13 09:59:19 2012] Updating aperture counts using extracted products
[Wed Jun 13 09:59:19 2012] Error reading totcts from fullrun_pn_xmm0112670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 09:59:21 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 09:59:21 2012] Using photon index=1.80, rate=1.21, arf fullrun_pn_xmm0112670101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 09:59:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 09:59:23 2012] Updating source flux to 3.6e-12
[Wed Jun 13 10:00:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 13 10:00:56 2012] xmm0112670101/analysis//spectral/fullrun_pn_xmm0112670101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete