[Wed Jun 13 06:34:20 2012] Detection parameters:
  Position = (304.2, 274.2) = 8 9 28.86 -47 20 17.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.3 +/- 11.5
  Background counts = 10.7
  Rate = 0.01 +/- 0.002

[Wed Jun 13 06:34:20 2012] Off-axis axis estimate = 1.81'
[Wed Jun 13 07:19:52 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:19:52 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Wed Jun 13 07:19:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Wed Jun 13 07:19:52 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.33"
[Wed Jun 13 07:35:40 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jun 13 07:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src7.csv
[Wed Jun 13 07:35:40 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jun 13 07:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src7.csv
[Wed Jun 13 07:35:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:35:40 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jun 13 07:35:40 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jun 13 07:35:40 2012] Fit fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jun 13 07:35:49 2012] Spatial fit model total counts = 1582.340000, observed total counts = 1575.000000
[Wed Jun 13 07:35:49 2012] Offset between fit and detection position for source 13 = 0.149171 pixels
[Wed Jun 13 07:35:49 2012] 314.353200 total counts/ 277.637000 bgd. counts: snr = 2.203530
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.149171 pixels
  Position = (304.1, 274.1) = 8 9 28.91 -47 20 18.0
  Extent = 3.1 (2.4-4.3)", rotation angle = 0
  Source counts = 36.7 +/- 17.7
  Background counts = 277.6
  Rate = 0.007 +/- 0.003
[Wed Jun 13 07:35:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:35:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:35:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 07:35:49 2012] Source does appear to be extended
[Wed Jun 13 07:35:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 08:18:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 08:18:25 2012] Initial guess for spatial extent in simple fitting = 3.11"
[Wed Jun 13 08:18:25 2012] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.678
[Wed Jun 13 08:18:25 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 3.11"
[Wed Jun 13 08:34:16 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jun 13 08:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src7.csv
[Wed Jun 13 08:34:16 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jun 13 08:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src7.csv
[Wed Jun 13 08:34:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 08:34:16 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jun 13 08:34:16 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jun 13 08:34:16 2012] Fit fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jun 13 08:34:27 2012] Spatial fit model total counts = 1534.020000, observed total counts = 1575.000000
[Wed Jun 13 08:34:27 2012] Offset between fit and detection position for source 13 = 0.093597 pixels
[Wed Jun 13 08:34:27 2012] 413.383800 total counts/ 379.396000 bgd. counts: snr = 1.744925
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.093597 pixels
  Position = (304.2, 274.1) = 8 9 28.88 -47 20 17.8
  Extent = 3.1 (2.5-3.7)", rotation angle = 0
  Source counts = 34.0 +/- 20.3
  Background counts = 379.4
  Rate = 0.006 +/- 0.004
[Wed Jun 13 08:34:27 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 08:34:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 08:34:27 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 08:34:27 2012] Source does appear to be extended
[Wed Jun 13 08:34:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 09:51:05 2012] XMMSAS src. selection expression = ellipse(26414.435020, 23799.843000, 187.927805, 187.927805, 0.000000, X, Y)
[Wed Jun 13 09:51:05 2012] Writing source region out to fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src13_src.reg
[Wed Jun 13 09:51:05 2012] Extracting stamp from image fullrun_mos2_xmm0112670101_pi300-10000_cl_sm2.00.img.gz, (293, 263) - (315, 285)
[Wed Jun 13 09:51:06 2012] XMMSAS bgd. selection expression = annulus(26414.435020, 23799.843000, 313.213009, 626.426018, X, Y) && !ellipse(25752.553600, 23911.382800, 430.150412, 430.150412, 0.000000, X, Y)
[Wed Jun 13 09:51:06 2012] Writing fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src13.gif
[Wed Jun 13 09:52:21 2012] Mean detx,y = (368.16, 387.47) 
[Wed Jun 13 09:52:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 09:52:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 09:52:27 2012] Setting source spectrum file to fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jun 13 09:52:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Jun 13 09:58:05 2012] Not generating rmf since there are only 33 counts
[Wed Jun 13 09:58:05 2012] rmf not generated due to insufficient counts
[Wed Jun 13 09:59:27 2012] Updating aperture counts using extracted products
[Wed Jun 13 09:59:27 2012] Error reading totcts from fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jun 13 09:59:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 09:59:27 2012] Using photon index=1.80, rate=0.00639, arf fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src13.arf
[Wed Jun 13 09:59:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 09:59:27 2012] Updating source flux to 1.1e-13
[Wed Jun 13 09:59:56 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting