[Wed Jun 13 06:34:20 2012] Detection parameters:
  Position = (296.5, 275.2) = 8 9 32.14 -47 20 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1991.8 +/- 52.4
  Background counts = 10.7
  Rate = 0.4 +/- 0.01

[Wed Jun 13 06:34:20 2012] Off-axis axis estimate = 1.69'
[Wed Jun 13 07:19:52 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:19:52 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jun 13 07:19:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Wed Jun 13 07:19:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Jun 13 07:35:40 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 07:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:35:40 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 07:35:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:35:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:35:40 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 07:35:40 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 07:35:40 2012] Fit fullrun_mos2_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 07:35:49 2012] Spatial fit model total counts = 1902.340000, observed total counts = 1867.000000
[Wed Jun 13 07:35:49 2012] Offset between fit and detection position for source 1 = 0.170711 pixels
[Wed Jun 13 07:35:49 2012] 1912.254000 total counts/ 470.264000 bgd. counts: snr = 66.495366
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.170711 pixels
  Position = (296.6, 275.4) = 8 9 32.13 -47 20 12.2
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1442.0 +/- 43.7
  Background counts = 470.3
  Rate = 0.3 +/- 0.008
[Wed Jun 13 07:35:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:35:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:35:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 07:35:49 2012] Source does appear to be extended
[Wed Jun 13 07:35:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 08:18:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 08:18:25 2012] Initial guess for spatial extent in simple fitting = 5.36"
[Wed Jun 13 08:18:25 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.750
[Wed Jun 13 08:18:25 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.36"
[Wed Jun 13 08:34:16 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 08:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 08:34:16 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 08:34:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 08:34:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 08:34:16 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 08:34:16 2012] fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 08:34:16 2012] Fit fullrun_mos2_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 08:34:27 2012] Spatial fit model total counts = 1902.170000, observed total counts = 1867.000000
[Wed Jun 13 08:34:27 2012] Offset between fit and detection position for source 1 = 0.001000 pixels
[Wed Jun 13 08:34:27 2012] 1912.304000 total counts/ 468.774000 bgd. counts: snr = 66.672088
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001000 pixels
  Position = (296.6, 275.4) = 8 9 32.13 -47 20 12.2
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 1443.5 +/- 43.7
  Background counts = 468.8
  Rate = 0.3 +/- 0.008
[Wed Jun 13 08:34:27 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 08:34:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 08:34:27 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 08:34:27 2012] Source does appear to be extended
[Wed Jun 13 08:34:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 09:51:05 2012] Counts = 1443.530000, rescaling region sizes by 2.000000
[Wed Jun 13 09:51:05 2012] XMMSAS src. selection expression = ellipse(25752.553600, 23911.382800, 645.225619, 645.225619, 0.000000, X, Y)
[Wed Jun 13 09:51:05 2012] Writing source region out to fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 13 09:51:05 2012] Extracting stamp from image fullrun_mos2_xmm0112670101_pi300-10000_cl_sm2.00.img.gz, (259, 238) - (334, 312)
[Wed Jun 13 09:51:05 2012] XMMSAS bgd. selection expression = annulus(25752.553600, 23911.382800, 2150.752062, 4301.504124, X, Y) && !ellipse(26414.435020, 23799.843000, 250.570407, 250.570407, 0.000000, X, Y)
[Wed Jun 13 09:51:05 2012] Writing fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src1.gif
[Wed Jun 13 09:51:07 2012] Mean detx,y = (-88.13, -85.41) 
[Wed Jun 13 09:51:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 09:51:24 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 09:51:24 2012] Setting source spectrum file to fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 09:51:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 13 09:59:26 2012] Updating aperture counts using extracted products
[Wed Jun 13 09:59:26 2012] Error reading totcts from fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 09:59:27 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 09:59:27 2012] Using photon index=1.80, rate=0.271, arf fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 09:59:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 09:59:27 2012] Updating source flux to 3.6e-12
[Wed Jun 13 10:00:11 2012] Reading fit data from xmm0112670101/analysis//spectral/fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 13 10:00:11 2012] Spectral fit parameter nH value = 2.08844e+13
[Wed Jun 13 10:00:11 2012] Spectral fit parameter PhoIndex value = 1.06054
[Wed Jun 13 10:00:11 2012] Failed to get F(0.3-8.0) from xmm0112670101/analysis//spectral/fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 10:00:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 10:00:11 2012] Using Nh = 2.1e+13, photon index=1.06, rate=0.271, arf fullrun_mos2_xmm0112670101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 10:00:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 10:00:11 2012] Updating source flux to 4.9e-12