[Wed Jun 13 06:34:01 2012] Detection parameters:
  Position = (296.5, 275.2) = 8 9 32.17 -47 20 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2064.7 +/- 54.7
  Background counts = 10.2
  Rate = 0.4 +/- 0.01

[Wed Jun 13 06:34:01 2012] Off-axis axis estimate = 1.69'
[Wed Jun 13 07:09:46 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 07:09:46 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jun 13 07:09:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Wed Jun 13 07:09:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Jun 13 07:19:52 2012] fullrun_mos1_xmm0112670101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 07:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112670101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:19:52 2012] fullrun_mos1_xmm0112670101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 07:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112670101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 07:19:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112670101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112670101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 07:19:52 2012] fullrun_mos1_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 07:19:52 2012] fullrun_mos1_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 07:19:52 2012] Fit fullrun_mos1_xmm0112670101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 07:35:47 2012] Source 1 is offset by 7.167243 and 5.887550 pixels which is larger than
2 X fitted extent = 0.836083 x 0.836083, not incorporating fit results
[Wed Jun 13 07:35:47 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 07:35:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 07:35:47 2012] Assessing source extent using major
[Wed Jun 13 07:35:47 2012] Source does appear to be extended
[Wed Jun 13 07:35:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 08:09:46 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 08:09:47 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Jun 13 08:09:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Wed Jun 13 08:09:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.27"
[Wed Jun 13 08:18:25 2012] fullrun_mos1_xmm0112670101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 08:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112670101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 08:18:25 2012] fullrun_mos1_xmm0112670101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 08:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112670101_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 08:18:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112670101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112670101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 08:18:25 2012] fullrun_mos1_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 08:18:25 2012] fullrun_mos1_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 08:18:25 2012] Fit fullrun_mos1_xmm0112670101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 08:34:24 2012] Spatial fit model total counts = 1858.910000, observed total counts = 1860.000000
[Wed Jun 13 08:34:24 2012] Offset between fit and detection position for source 1 = 0.154007 pixels
[Wed Jun 13 08:34:24 2012] 1858.263000 total counts/ 458.203000 bgd. counts: snr = 65.406014
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.154007 pixels
  Position = (296.4, 275.3) = 8 9 32.18 -47 20 12.4
  Extent = 5.3 (5.0-5.5)", rotation angle = 0
  Source counts = 1400.1 +/- 43.1
  Background counts = 458.2
  Rate = 0.3 +/- 0.008
[Wed Jun 13 08:34:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 08:34:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 08:34:24 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 08:34:24 2012] Source does appear to be extended
[Wed Jun 13 08:34:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 09:39:45 2012] Counts = 1400.060000, rescaling region sizes by 2.000000
[Wed Jun 13 09:39:45 2012] XMMSAS src. selection expression = ellipse(25742.384200, 23906.915800, 632.108418, 632.108418, 0.000000, X, Y)
[Wed Jun 13 09:39:45 2012] Writing source region out to fullrun_mos1_xmm0112670101_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 13 09:39:45 2012] Extracting stamp from image fullrun_mos1_xmm0112670101_pi300-10000_cl_sm2.00.img.gz, (260, 239) - (333, 312)
[Wed Jun 13 09:39:45 2012] XMMSAS bgd. selection expression = annulus(25742.384200, 23906.915800, 2107.028061, 4214.056121, X, Y)
[Wed Jun 13 09:39:45 2012] Writing fullrun_mos1_xmm0112670101_pi300-10000_pass1_cl_src1.gif
[Wed Jun 13 09:39:47 2012] Mean detx,y = (129.36, -56.50) 
[Wed Jun 13 09:39:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 09:40:04 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 09:40:04 2012] Setting source spectrum file to fullrun_mos1_xmm0112670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 09:40:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112670101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 13 09:59:26 2012] Updating aperture counts using extracted products
[Wed Jun 13 09:59:26 2012] Error reading totcts from fullrun_mos1_xmm0112670101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 13 09:59:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 09:59:26 2012] Using photon index=1.80, rate=0.268, arf fullrun_mos1_xmm0112670101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 09:59:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 09:59:26 2012] Updating source flux to 3.2e-12
[Wed Jun 13 09:59:28 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Jun 13 09:59:56 2012] Reading fit data from xmm0112670101/analysis//spectral/fullrun_mos1_xmm0112670101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 13 09:59:56 2012] Spectral fit parameter nH value = 2.31491e+13
[Wed Jun 13 09:59:56 2012] Spectral fit parameter PhoIndex value = 0.963761
[Wed Jun 13 09:59:56 2012] Failed to get F(0.3-8.0) from xmm0112670101/analysis//spectral/fullrun_mos1_xmm0112670101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 09:59:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 09:59:56 2012] Using Nh = 2.3e+13, photon index=0.96, rate=0.268, arf fullrun_mos1_xmm0112670101_pi300-10000_pass1_cl_src1.arf
[Wed Jun 13 09:59:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 09:59:56 2012] Updating source flux to 4.6e-12