[Fri May 31 21:38:52 2013] Detection parameters:
  Position = (266.1, 225.3) = 5 35 31.22 -5 58 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 663.1 +/- 31.9
  Background counts = 29.7
  Rate = 0.05 +/- 0.002

[Fri May 31 21:39:01 2013] Off-axis axis estimate = 5.80'
[Fri May 31 21:40:49 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:49 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Fri May 31 21:40:49 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.072
[Fri May 31 21:40:49 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 9.33"
[Fri May 31 21:40:51 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src43.ximg exists
[Fri May 31 21:40:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src43.csv
[Fri May 31 21:40:51 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri May 31 21:40:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src43.csv
[Fri May 31 21:40:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri May 31 21:40:52 2013] Fit fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri May 31 21:41:43 2013] Warning, spatial fit 43 centroid is now closest to src. 133
[Fri May 31 21:41:44 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:41:44 2013] Assessing source extent using major
[Fri May 31 21:41:44 2013] Source does appear to be extended
[Fri May 31 21:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:16 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:16 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Fri May 31 21:43:16 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.072
[Fri May 31 21:43:16 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 9.33"
[Fri May 31 21:43:17 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src43.ximg exists
[Fri May 31 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src43.csv
[Fri May 31 21:43:17 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri May 31 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src43.csv
[Fri May 31 21:43:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:19 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri May 31 21:43:19 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri May 31 21:43:19 2013] Fit fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Fri May 31 21:44:06 2013] Spatial fit model total counts = 1140.000000, observed total counts = 1140.000000
[Fri May 31 21:44:06 2013] Offset between fit and detection position for source 48 = 0.189633 pixels
[Fri May 31 21:44:06 2013] 1111.610000 total counts/ 696.224000 bgd. counts: snr = 15.742633
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.189633 pixels
  Position = (266.2, 225.4) = 5 35 31.18 -5 58 33.1
  Extent = 4.9 (4.4-5.3)", rotation angle = 0
  Source counts = 415.4 +/- 33.3
  Background counts = 696.2
  Rate = 0.02 +/- 0.002
[Fri May 31 21:44:07 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:07 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:07 2013] Source does appear to be extended
[Fri May 31 21:44:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:45:45 2013] XMMSAS src. selection expression = ellipse(23109.476420, 19563.735600, 292.494008, 292.494008, 0.000000, X, Y)
[Fri May 31 21:45:45 2013] Not overwriting source region fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src48_src.reg
[Fri May 31 21:45:45 2013] Extracting stamp from image fullrun_pn_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (249, 209) - (283, 242)
[Fri May 31 21:45:45 2013] XMMSAS bgd. selection expression = annulus(23109.476420, 19563.735600, 487.490014, 974.980028, X, Y) && !ellipse(22584.602570, 20140.956085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23927.365051, 18754.450668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22891.911591, 18212.472900, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:45:45 2013] Writing fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src48.gif
[Fri May 31 22:37:13 2013] Mean detx,y = (1612.33, -4937.81) 
[Fri May 31 22:37:18 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 22:37:36 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 22:37:37 2013] Setting source spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Fri May 31 22:37:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sat Jun  1 08:03:49 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:03:49 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 511.00
[Sat Jun  1 08:03:49 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 132.00
[Sat Jun  1 08:03:49 2013] Got source and background scale factors 265600.000000, 521949.000000
[Sat Jun  1 08:03:49 2013] User source parameters:
  Position = (266.2, 225.4) = 5 35 31.18 -5 58 33.1
  Extent = 4.9 (4.4-5.3)", rotation angle = 0
  Source aperture counts = 443.8 +/- 23.6
  Background aperture counts = 67.2
  Rate = 0.02 +/- 0.001

[Sat Jun  1 08:04:25 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:04:25 2013] Using photon index=1.80, rate=0.0208, arf fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src48.arf
[Sat Jun  1 08:04:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:04:25 2013] Updating source flux to 1.3e-13
[Sat Jun  1 08:07:03 2013] xmm0112660101/analysis//spectral/fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete