[Fri May 31 21:38:51 2013] Detection parameters:
  Position = (300.1, 289.8) = 5 35 21.30 -5 53 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1064.8 +/- 43.1
  Background counts = 32.2
  Rate = 0.06 +/- 0.003

[Fri May 31 21:39:01 2013] Off-axis axis estimate = 0.64'
[Fri May 31 21:40:49 2013] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:49 2013] Initial guess for spatial extent in simple fitting = 6.75"
[Fri May 31 21:40:49 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.951
[Fri May 31 21:40:49 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 6.75"
[Fri May 31 21:40:51 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src33.ximg exists
[Fri May 31 21:40:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src33.csv
[Fri May 31 21:40:51 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri May 31 21:40:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src33.csv
[Fri May 31 21:40:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri May 31 21:40:52 2013] Fit fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Fri May 31 21:41:43 2013] Source 38 is offset by -5.868322 and -7.388364 pixels which is larger than
2 X fitted extent = 3.445802 x 3.445802, not incorporating fit results
[Fri May 31 21:41:44 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:41:44 2013] Assessing source extent using major
[Fri May 31 21:41:44 2013] Source does appear to be extended
[Fri May 31 21:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:16 2013] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:16 2013] Initial guess for spatial extent in simple fitting = 6.75"
[Fri May 31 21:43:16 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.951
[Fri May 31 21:43:16 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 6.75"
[Fri May 31 21:43:17 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src33.ximg exists
[Fri May 31 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src33.csv
[Fri May 31 21:43:17 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri May 31 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src33.csv
[Fri May 31 21:43:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:19 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri May 31 21:43:19 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri May 31 21:43:19 2013] Fit fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Fri May 31 21:44:06 2013] Source 38 is offset by -5.845931 and -7.388364 pixels which is larger than
2 X fitted extent = 3.383706 x 3.383706, not incorporating fit results
[Fri May 31 21:44:07 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:07 2013] Assessing source extent using major
[Fri May 31 21:44:07 2013] Source does appear to be extended
[Fri May 31 21:44:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:45:44 2013] Counts = 1064.803955, rescaling region sizes by 2.000000
[Fri May 31 21:45:44 2013] XMMSAS src. selection expression = ellipse(26059.719971, 25165.458313, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 31 21:45:44 2013] Not overwriting source region fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src38_src.reg
[Fri May 31 21:45:44 2013] Extracting stamp from image fullrun_pn_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (225, 215) - (375, 365)
[Fri May 31 21:45:44 2013] XMMSAS bgd. selection expression = annulus(26059.719971, 25165.458313, 4350.000000, 8700.000000, X, Y) && !ellipse(31646.464478, 17693.766464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24684.935800, 24311.700000, 1503.522475, 1503.522475, 0.000000, X, Y) && !ellipse(25898.408400, 28475.640940, 478.591214, 478.591214, 0.000000, X, Y) && !ellipse(24892.574600, 35064.358000, 1667.056048, 440.417613, 95.041000, X, Y) && !ellipse(29390.825928, 33967.310547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33997.617706, 33726.257782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32781.022217, 32205.794189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23564.358200, 31322.513200, 433.008012, 433.008012, 0.000000, X, Y) && !ellipse(24404.188420, 31197.737000, 519.848015, 519.848015, 0.000000, X, Y) && !ellipse(27129.611816, 30340.744965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18493.772606, 30493.627720, 522.137964, 457.112737, 115.187447, X, Y) && !ellipse(27985.667603, 30334.779114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23773.226400, 30034.369000, 489.661614, 489.661614, 0.000000, X, Y) && !ellipse(31613.141205, 28563.133820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19103.666520, 28568.083000, 440.353613, 440.353613, 0.000000, X, Y) && !ellipse(24832.359056, 28460.311800, 519.408815, 519.408815, 0.000000, X, Y) && !ellipse(23423.690320, 28288.793200, 456.539213, 456.539213, 0.000000, X, Y) && !ellipse(28009.464630, 27785.311127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17382.375336, 27794.688690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28267.222839, 27272.550629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24753.840400, 26134.380000, 1101.184032, 1101.184032, 0.000000, X, Y) && !ellipse(30040.474426, 25353.089233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29160.746399, 22874.699036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32050.873230, 22740.107635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30659.048462, 21417.699936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26029.773000, 20580.517800, 484.369614, 381.327211, 349.950983, X, Y) && !ellipse(24929.470900, 20638.857340, 481.349238, 481.349238, 0.000000, X, Y) && !ellipse(29754.864960, 19930.687057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23109.476420, 19563.735600, 389.992011, 389.992011, 0.000000, X, Y) && !ellipse(25283.800934, 18202.082443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32874.973083, 17800.045959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32097.997345, 17163.181427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31105.170380, 16820.345459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33756.739800, 16583.301600, 392.096811, 392.096811, 0.000000, X, Y) && !ellipse(25425.863586, 16128.743515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26784.925293, 34304.517853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.169600, 33584.682800, 930.400027, 930.400027, 0.000000, X, Y) && !ellipse(26392.384521, 33709.841736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24858.246400, 32952.202000, 450.222413, 450.222413, 0.000000, X, Y) && !ellipse(24950.340000, 32509.394000, 1286.256037, 1286.256037, 0.000000, X, Y) && !ellipse(26622.084381, 32524.057861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24898.550873, 32060.587982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32302.062897, 31081.638855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24814.338620, 30067.902800, 1303.568038, 318.700009, 90.000000, X, Y) && !ellipse(29970.656380, 29818.691000, 484.301614, 484.301614, 0.000000, X, Y) && !ellipse(24819.685883, 29892.289276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18049.977142, 29626.027008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19261.730340, 29713.934800, 478.019214, 338.303210, 306.851100, X, Y) && !ellipse(24794.844200, 29116.003000, 665.175219, 665.175219, 0.000000, X, Y) && !ellipse(24773.648028, 28019.388344, 1326.016038, 482.412654, 89.806250, X, Y) && !ellipse(33451.549160, 27307.096000, 382.192811, 382.192811, 0.000000, X, Y) && !ellipse(30165.694800, 27250.501920, 349.215210, 349.215210, 0.000000, X, Y) && !ellipse(24805.820000, 27380.662000, 508.188015, 508.188015, 0.000000, X, Y) && !ellipse(30652.620636, 26681.206573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25373.510440, 26834.987600, 312.563209, 312.563209, 0.000000, X, Y) && !ellipse(33073.005200, 25795.410000, 469.852014, 469.852014, 0.000000, X, Y) && !ellipse(33037.373260, 25368.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34450.313477, 24912.102142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26860.798065, 24826.243805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31985.190460, 24638.034088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22275.196075, 23865.760406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23156.450745, 22975.858307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24339.818542, 22924.398529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25540.279419, 22931.715790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24918.654755, 22750.005585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24020.561890, 22070.691116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.526886, 21887.054688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27944.265076, 21868.238495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19331.113739, 21547.692825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28655.919128, 21284.020538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18840.974091, 20791.703766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22584.602570, 20140.956085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18184.115860, 20086.923584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23927.365051, 18754.450668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28586.275055, 18277.368454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22891.911591, 18212.472900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16595.541473, 18055.751831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34503.931793, 17957.702927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35162.057800, 17534.407623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29110.130920, 17411.370911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18697.817566, 16897.436890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34245.663818, 16561.049988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19000.541351, 16477.257263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18081.764481, 15956.393616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29285.224792, 15713.757126, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:45:44 2013] Writing fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src38.gif
[Fri May 31 22:23:33 2013] Mean detx,y = (-643.30, 418.68) 
[Fri May 31 22:23:43 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 22:27:02 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 22:27:02 2013] Setting source spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri May 31 22:27:02 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Jun  1 01:40:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 01:40:27 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:03:45 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:03:45 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 8364.00
[Sat Jun  1 08:03:45 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 15242.00
[Sat Jun  1 08:03:45 2013] Got source and background scale factors 4886667.000000, 101990261.000000
[Sat Jun  1 08:03:45 2013] User source parameters:
  Position = (300.1, 289.8) = 5 35 21.30 -5 53 52.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 7633.7 +/- 92.5
  Background aperture counts = 730.3
  Rate = 0.4 +/- 0.005

[Sat Jun  1 08:03:45 2013] Updating counts from extracted products
[Sat Jun  1 08:03:45 2013] Set source signif. to 7633.71/27.02 = 282.48
[Sat Jun  1 08:04:25 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:04:25 2013] Using photon index=1.80, rate=0.383, arf fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src38.arf
[Sat Jun  1 08:04:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:04:25 2013] Updating source flux to 1.5e-12
[Sat Jun  1 08:06:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:07:03 2013] xmm0112660101/analysis//spectral/fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete