[Fri May 31 21:38:50 2013] Detection parameters:
  Position = (325.5, 314.0) = 5 35 13.90 -5 52 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 646.0 +/- 32.7
  Background counts = 31.9
  Rate = 0.05 +/- 0.002

[Fri May 31 21:39:01 2013] Off-axis axis estimate = 2.26'
[Fri May 31 21:40:49 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:49 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Fri May 31 21:40:49 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.998
[Fri May 31 21:40:49 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.56"
[Fri May 31 21:40:51 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src29.ximg exists
[Fri May 31 21:40:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src29.csv
[Fri May 31 21:40:51 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri May 31 21:40:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src29.csv
[Fri May 31 21:40:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri May 31 21:40:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri May 31 21:40:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Fri May 31 21:40:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:41:43 2013] Spatial fit model total counts = 3548.250000, observed total counts = 2318.000000
[Fri May 31 21:41:43 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:41:44 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:41:44 2013] Assessing source extent using major
[Fri May 31 21:41:44 2013] Source does appear to be extended
[Fri May 31 21:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:41:44 2013] Source is confused with source 32
[Fri May 31 21:43:16 2013] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:16 2013] Initial guess for spatial extent in simple fitting = 7.56"
[Fri May 31 21:43:16 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.998
[Fri May 31 21:43:16 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 7.56"
[Fri May 31 21:43:17 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src29.ximg exists
[Fri May 31 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src29.csv
[Fri May 31 21:43:17 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri May 31 21:43:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src29.csv
[Fri May 31 21:43:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:19 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri May 31 21:43:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri May 31 21:43:19 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri May 31 21:43:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Fri May 31 21:43:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:06 2013] Source 34 is offset by -3.518841 and 0.021984 pixels which is larger than
2 X fitted extent = 0.873366 x 0.873366, not incorporating fit results
[Fri May 31 21:44:06 2013] Spatial fit model total counts = 4341.190000, observed total counts = 2318.000000
[Fri May 31 21:44:06 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:44:07 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:07 2013] Assessing source extent using major
[Fri May 31 21:44:07 2013] Source does appear to be extended
[Fri May 31 21:44:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:45:44 2013] XMMSAS src. selection expression = ellipse(28267.222839, 27272.550629, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:45:44 2013] Not overwriting source region fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src34_src.reg
[Fri May 31 21:45:44 2013] Extracting stamp from image fullrun_pn_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (288, 277) - (363, 352)
[Fri May 31 21:45:44 2013] XMMSAS bgd. selection expression = annulus(28267.222839, 27272.550629, 1087.500000, 2175.000000, X, Y) && !ellipse(24684.935800, 24311.700000, 1503.522475, 1503.522475, 0.000000, X, Y) && !ellipse(25898.408400, 28475.640940, 478.591214, 478.591214, 0.000000, X, Y) && !ellipse(28009.464630, 27785.311127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30040.474426, 25353.089233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26059.719971, 25165.458313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24814.338620, 30067.902800, 1303.568038, 318.700009, 90.000000, X, Y) && !ellipse(29970.656380, 29818.691000, 484.301614, 484.301614, 0.000000, X, Y) && !ellipse(24773.648028, 28019.388344, 1326.016038, 482.412654, 89.806250, X, Y) && !ellipse(30165.694800, 27250.501920, 349.215210, 349.215210, 0.000000, X, Y) && !ellipse(30652.620636, 26681.206573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26860.798065, 24826.243805, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:45:44 2013] Writing fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src34.gif
[Fri May 31 22:18:23 2013] Mean detx,y = (-3214.37, 3126.93) 
[Fri May 31 22:18:29 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 22:19:10 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 22:19:11 2013] Setting source spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri May 31 22:19:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat Jun  1 01:28:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 01:28:09 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:03:43 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:03:44 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 1852.00
[Sat Jun  1 08:03:44 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src34_bgd.pi.gz = 1550.00
[Sat Jun  1 08:03:44 2013] Got source and background scale factors 1092188.000000, 7903656.000000
[Sat Jun  1 08:03:44 2013] User source parameters:
  Position = (325.5, 314.0) = 5 35 13.90 -5 52 9.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1637.8 +/- 44.0
  Background aperture counts = 214.2
  Rate = 0.08 +/- 0.002

[Sat Jun  1 08:03:44 2013] Updating counts from extracted products
[Sat Jun  1 08:03:44 2013] Set source signif. to 1637.81/14.64 = 111.91
[Sat Jun  1 08:04:25 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:04:25 2013] Using photon index=1.80, rate=0.0821, arf fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src34.arf
[Sat Jun  1 08:04:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:04:25 2013] Updating source flux to 4.4e-13
[Sat Jun  1 08:06:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:07:03 2013] xmm0112660101/analysis//spectral/fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete