[Fri May 31 21:38:48 2013] Detection parameters:
  Position = (338.4, 391.0) = 5 35 10.14 -5 46 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.4 +/- 19.1
  Background counts = 28.3
  Rate = 0.01 +/- 0.001

[Fri May 31 21:39:01 2013] Off-axis axis estimate = 7.31'
[Fri May 31 21:40:49 2013] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:49 2013] Initial guess for spatial extent in simple fitting = 10.08"
[Fri May 31 21:40:49 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.945
[Fri May 31 21:40:49 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.08"
[Fri May 31 21:40:50 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src13.ximg exists
[Fri May 31 21:40:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src13.csv
[Fri May 31 21:40:50 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri May 31 21:40:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src13.csv
[Fri May 31 21:40:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri May 31 21:40:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 31 21:40:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri May 31 21:40:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:41:42 2013] Spatial fit model total counts = 500.990000, observed total counts = 418.000000
[Fri May 31 21:41:42 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:41:43 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:41:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:41:43 2013] Assessing source extent using major
[Fri May 31 21:41:43 2013] Source does appear to be extended
[Fri May 31 21:41:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:16 2013] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:16 2013] Initial guess for spatial extent in simple fitting = 10.08"
[Fri May 31 21:43:16 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.945
[Fri May 31 21:43:16 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.08"
[Fri May 31 21:43:17 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 31 21:43:17 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 31 21:43:17 2013] Fit fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src13 appears to have run properly
[Fri May 31 21:43:18 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 31 21:43:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 31 21:43:18 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 31 21:43:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May 31 21:43:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:06 2013] Warning, spatial fit 13 centroid is now closest to src. 10
[Fri May 31 21:44:07 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:07 2013] Assessing source extent using major
[Fri May 31 21:44:07 2013] Source does appear to be extended
[Fri May 31 21:44:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:45:42 2013] XMMSAS src. selection expression = ellipse(29390.825928, 33967.310547, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 21:45:42 2013] Not overwriting source region fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src15_src.reg
[Fri May 31 21:45:42 2013] Extracting stamp from image fullrun_pn_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (301, 353) - (376, 428)
[Fri May 31 21:45:42 2013] XMMSAS bgd. selection expression = annulus(29390.825928, 33967.310547, 1087.500000, 2175.000000, X, Y) && !ellipse(28811.190552, 34982.399933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30599.686000, 35209.678400, 450.697613, 450.697613, 0.000000, X, Y) && !ellipse(31553.015400, 35145.233600, 506.060015, 506.060015, 0.000000, X, Y) && !ellipse(26784.925293, 34304.517853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26392.384521, 33709.841736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26622.084381, 32524.057861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32302.062897, 31081.638855, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 21:45:42 2013] Writing fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src15.gif
[Fri May 31 21:56:53 2013] Mean detx,y = (-4383.43, 9587.41) 
[Fri May 31 21:56:58 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 21:57:24 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 21:57:25 2013] Setting source spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri May 31 21:57:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jun  1 00:49:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 00:49:21 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:03:36 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:03:36 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 364.00
[Sat Jun  1 08:03:36 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1188.00
[Sat Jun  1 08:03:37 2013] Got source and background scale factors 1182494.000000, 7949141.000000
[Sat Jun  1 08:03:37 2013] User source parameters:
  Position = (338.4, 391.0) = 5 35 10.14 -5 46 32.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 187.3 +/- 20.1
  Background aperture counts = 176.7
  Rate = 0.009 +/- 0.001

[Sat Jun  1 08:03:37 2013] Updating counts from extracted products
[Sat Jun  1 08:03:37 2013] Set source signif. to 187.28/13.29 = 14.09
[Sat Jun  1 08:04:23 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:04:23 2013] Using photon index=1.80, rate=0.00938, arf fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src15.arf
[Sat Jun  1 08:04:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:04:23 2013] Updating source flux to 7.4e-14
[Sat Jun  1 08:06:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:07:03 2013] xmm0112660101/analysis//spectral/fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete