[Fri May 31 21:38:57 2013] Detection parameters: Position = (396.5, 286.9) = 5 34 53.18 -5 54 6.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 82.4 +/- 12.7 Background counts = 23.5 Rate = 0.004 +/- 0.0006 [Fri May 31 21:39:01 2013] Off-axis axis estimate = 7.16' [Fri May 31 21:40:49 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting [Fri May 31 21:40:49 2013] Initial guess for spatial extent in simple fitting = 10.01" [Fri May 31 21:40:49 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.956 [Fri May 31 21:40:49 2013] Giving source the simple spatial ID 99 for pass 0, mean size = 10.01" [Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src99.ximg exists [Fri May 31 21:40:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src99.csv [Fri May 31 21:40:52 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src99_1.ximg exists [Fri May 31 21:40:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src99.csv [Fri May 31 21:40:52 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src99_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 21:40:53 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src99.ximg exists [Fri May 31 21:40:53 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists [Fri May 31 21:40:53 2013] Fit fullrun_pn_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly [Fri May 31 21:41:43 2013] Warning: source 99 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 105 at 13.460853 pixels away [Fri May 31 21:41:44 2013] Vigneting correction estimate = 1.000000 [Fri May 31 21:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 31 21:41:44 2013] Assessing source extent using major [Fri May 31 21:41:44 2013] Source does appear to be extended [Fri May 31 21:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 31 21:43:16 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting [Fri May 31 21:43:16 2013] Initial guess for spatial extent in simple fitting = 10.01" [Fri May 31 21:43:16 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.956 [Fri May 31 21:43:16 2013] Giving source the simple spatial ID 95 for pass 1, mean size = 10.01" [Fri May 31 21:43:18 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src95.ximg exists [Fri May 31 21:43:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src95.csv [Fri May 31 21:43:18 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src95_1.ximg exists [Fri May 31 21:43:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src95.csv [Fri May 31 21:43:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src95_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 21:43:20 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src95.ximg exists [Fri May 31 21:43:20 2013] fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src95_1.ximg exists [Fri May 31 21:43:20 2013] Fit fullrun_pn_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src95 appears to have run properly [Fri May 31 21:44:07 2013] Source 105 is offset by 7.224776 and 0.616944 pixels which is larger than 2 X fitted extent = 1.214184 x 1.214184, not incorporating fit results [Fri May 31 21:44:07 2013] Warning: source 95 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 105 at 12.674196 pixels away [Fri May 31 21:44:07 2013] Vigneting correction estimate = 1.000000 [Fri May 31 21:44:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 31 21:44:07 2013] Assessing source extent using major [Fri May 31 21:44:07 2013] Source does appear to be extended [Fri May 31 21:44:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 31 21:45:49 2013] XMMSAS src. selection expression = ellipse(34450.313477, 24912.102142, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 31 21:45:49 2013] Not overwriting source region fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src105_src.reg [Fri May 31 21:45:49 2013] Extracting stamp from image fullrun_pn_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (359, 249) - (434, 324) [Fri May 31 21:45:49 2013] XMMSAS bgd. selection expression = annulus(34450.313477, 24912.102142, 1087.500000, 2175.000000, X, Y) && !ellipse(35939.880400, 27433.149800, 637.704018, 385.337611, 78.543283, X, Y) && !ellipse(32050.873230, 22740.107635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33451.549160, 27307.096000, 382.192811, 382.192811, 0.000000, X, Y) && !ellipse(35434.943200, 26171.215400, 332.508810, 332.508810, 0.000000, X, Y) && !ellipse(33073.005200, 25795.410000, 469.852014, 469.852014, 0.000000, X, Y) && !ellipse(33037.373260, 25368.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31985.190460, 24638.034088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37109.994385, 22308.883087, 870.000000, 870.000000, 0.000000, X, Y) [Fri May 31 21:45:49 2013] Writing fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src105.gif [Fri May 31 23:15:58 2013] Mean detx,y = (-9595.47, 634.88) [Fri May 31 23:16:04 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 31 23:16:24 2013] Binned source spectrum to 10 counts/bin [Fri May 31 23:16:24 2013] Setting source spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src105_src_b10.pi.gz [Fri May 31 23:16:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src105_bgd.pi.gz [Sat Jun 1 04:10:27 2013] Not generating rmf since there are only 82 counts [Sat Jun 1 04:10:27 2013] rmf not generated due to insufficient counts [Sat Jun 1 08:04:08 2013] Updating aperture counts using extracted products [Sat Jun 1 08:04:08 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src105_src_b10.pi.gz = 217.00 [Sat Jun 1 08:04:08 2013] Total counts from fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src105_bgd.pi.gz = 1107.00 [Sat Jun 1 08:04:08 2013] Got source and background scale factors 1331200.000000, 8086346.000000 [Sat Jun 1 08:04:08 2013] User source parameters: Position = (396.5, 286.9) = 5 34 53.18 -5 54 6.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 34.8 +/- 15.8 Background aperture counts = 182.2 Rate = 0.002 +/- 0.0008 [Sat Jun 1 08:04:08 2013] Updating counts from extracted products [Sat Jun 1 08:04:08 2013] Set source signif. to 34.76/13.50 = 2.58 [Sat Jun 1 08:04:30 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 08:04:30 2013] Using photon index=1.80, rate=0.00174, arf fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src105.arf [Sat Jun 1 08:04:30 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 08:04:30 2013] Updating source flux to 1.3e-14 [Sat Jun 1 08:06:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 08:07:03 2013] xmm0112660101/analysis//spectral/fullrun_pn_xmm0112660101_pi300-10000_pass1_cl_src105_pl.csv not found, spectral fit skipped or did not complete