[Fri May 31 21:39:10 2013] Detection parameters:
  Position = (271.3, 362.6) = 5 35 29.68 -5 48 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.4 +/- 24.3
  Background counts = 9.7
  Rate = 0.03 +/- 0.002

[Fri May 31 21:39:14 2013] Off-axis axis estimate = 5.05'
[Fri May 31 21:40:58 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:58 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Fri May 31 21:40:58 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.764
[Fri May 31 21:40:58 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.95"
[Fri May 31 21:40:59 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 31 21:41:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src3.csv
[Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 31 21:41:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src3.csv
[Fri May 31 21:41:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 31 21:41:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 31 21:41:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 31 21:41:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:42:31 2013] Spatial fit model total counts = 1007.600000, observed total counts = 553.000000
[Fri May 31 21:42:31 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:42:31 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:31 2013] Assessing source extent using major
[Fri May 31 21:42:31 2013] Source does appear to be extended
[Fri May 31 21:42:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:24 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:24 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Fri May 31 21:43:24 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.764
[Fri May 31 21:43:24 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.95"
[Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src3.csv
[Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src3.csv
[Fri May 31 21:43:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 31 21:43:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:52 2013] Warning, spatial fit 3 centroid is now closest to src. 9
[Fri May 31 21:44:52 2013] Source 8 is offset by -0.943243 and -5.465789 pixels which is larger than
2 X fitted extent = 8.084276 x 4.936644, not incorporating fit results
[Fri May 31 21:44:53 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:53 2013] Assessing source extent using major
[Fri May 31 21:44:53 2013] Source does appear to be extended
[Fri May 31 21:44:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 08:02:25 2013] XMMSAS src. selection expression = ellipse(23558.047821, 31493.776398, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 08:02:25 2013] Not overwriting source region fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_src.reg
[Sat Jun  1 08:02:25 2013] Extracting stamp from image fullrun_mos2_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (234, 325) - (309, 400)
[Sat Jun  1 08:02:25 2013] XMMSAS bgd. selection expression = annulus(23558.047821, 31493.776398, 1087.500000, 2175.000000, X, Y) && !ellipse(24366.347595, 31406.221497, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 08:02:25 2013] Writing fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8.gif
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sat Jun  1 08:02:27 2013] Mean detx,y = (-1245.82, -7062.91) 
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_src.img and ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sat Jun  1 08:02:27 2013] Setting source spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun  1 08:02:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sat Jun  1 08:02:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 08:02:46 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:02:46 2013] fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Sat Jun  1 08:05:12 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:05:12 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 522.00
[Sat Jun  1 08:05:12 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 247.00
[Sat Jun  1 08:05:12 2013] Got source and background scale factors 991454.000000, 4986207.000000
[Sat Jun  1 08:05:12 2013] User source parameters:
  Position = (271.3, 362.6) = 5 35 29.68 -5 48 43.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 472.9 +/- 23.9
  Background aperture counts = 49.1
  Rate = 0.02 +/- 0.001

[Sat Jun  1 08:05:12 2013] Updating counts from extracted products
[Sat Jun  1 08:05:12 2013] Set source signif. to 472.89/7.01 = 67.48
[Sat Jun  1 08:05:29 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:29 2013] Using photon index=1.80, rate=0.021, arf fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8.arf
[Sat Jun  1 08:05:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:29 2013] Updating source flux to 3.8e-13
[Sat Jun  1 08:06:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:21 2013] xmm0112660101/analysis//spectral/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete