[Fri May 31 21:39:14 2013] Detection parameters:
  Position = (335.0, 200.0) = 5 35 11.11 -6 0 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.7 +/- 8.9
  Background counts = 9.6
  Rate = 0.004 +/- 0.0007

[Fri May 31 21:39:14 2013] Off-axis axis estimate = 7.62'
[Fri May 31 21:40:58 2013] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:58 2013] Initial guess for spatial extent in simple fitting = 10.24"
[Fri May 31 21:40:58 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.106
[Fri May 31 21:40:58 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 10.24"
[Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src45.ximg exists
[Fri May 31 21:41:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src45.csv
[Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src45_1.ximg exists
[Fri May 31 21:41:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src45.csv
[Fri May 31 21:41:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:41:02 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Fri May 31 21:41:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Fri May 31 21:41:02 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Fri May 31 21:41:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Fri May 31 21:41:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:42:31 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 10.255632 pixels away
[Fri May 31 21:42:31 2013] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 12.528227 pixels away
[Fri May 31 21:42:31 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:31 2013] Assessing source extent using major
[Fri May 31 21:42:31 2013] Source does appear to be extended
[Fri May 31 21:42:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:24 2013] Using EEF radius (= 10.24 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:24 2013] Initial guess for spatial extent in simple fitting = 10.24"
[Fri May 31 21:43:24 2013] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.106
[Fri May 31 21:43:24 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 10.24"
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src43.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src43.csv
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src43_1.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src43.csv
[Fri May 31 21:43:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:27 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Fri May 31 21:43:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Fri May 31 21:43:27 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Fri May 31 21:43:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src43.csv
[Fri May 31 21:43:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:53 2013] Spatial fit model total counts = 269.825000, observed total counts = 101.000000
[Fri May 31 21:44:53 2013] Poor agreement between spatial fit and data for source 61
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:44:53 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:53 2013] Assessing source extent using major
[Fri May 31 21:44:53 2013] Source does appear to be extended
[Fri May 31 21:44:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 08:02:26 2013] XMMSAS src. selection expression = ellipse(29098.642609, 17349.718475, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 08:02:26 2013] Not overwriting source region fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_src.reg
[Sat Jun  1 08:02:26 2013] Extracting stamp from image fullrun_mos2_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (298, 162) - (373, 237)
[Sat Jun  1 08:02:26 2013] XMMSAS bgd. selection expression = annulus(29098.642609, 17349.718475, 1087.500000, 2175.000000, X, Y) && !ellipse(31113.507172, 16749.407059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32127.505341, 17118.073807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31558.110413, 17295.352768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31725.446289, 18018.410172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27734.977081, 15451.987167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29761.130000, 15402.392000, 578.041617, 258.450407, 359.732218, X, Y) && !ellipse(29291.514557, 15743.371323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25730.832000, 14750.708000, 1721.584050, 1721.584050, 0.000000, X, Y)
[Sat Jun  1 08:02:26 2013] Writing fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61.gif
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_src.evt and ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_bgd.evt exist, delete to re-create
[Sat Jun  1 08:02:28 2013] Mean detx,y = (4663.90, 6914.24) 
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_src.img and ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_bgd.img exist, delete to re-create
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_bgd.pi exist, delete to re-create
[Sat Jun  1 08:02:28 2013] Setting source spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sat Jun  1 08:02:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_bgd.lc exist, delete to re-create
[Sat Jun  1 08:02:46 2013] Not generating rmf since there are only 46 counts
[Sat Jun  1 08:02:46 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:02:46 2013] fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61.arf exists, delete to re-create
[Sat Jun  1 08:05:25 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:05:25 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 92.00
[Sat Jun  1 08:05:25 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_bgd.pi.gz = 110.00
[Sat Jun  1 08:05:25 2013] Got source and background scale factors 930884.000000, 2258865.000000
[Sat Jun  1 08:05:25 2013] User source parameters:
  Position = (335.0, 200.0) = 5 35 11.11 -6 0 22.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 46.7 +/- 10.6
  Background aperture counts = 45.3
  Rate = 0.002 +/- 0.0005

[Sat Jun  1 08:05:25 2013] Updating counts from extracted products
[Sat Jun  1 08:05:25 2013] Set source signif. to 46.67/6.73 = 6.93
[Sat Jun  1 08:05:32 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:32 2013] Using photon index=1.80, rate=0.00207, arf fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61.arf
[Sat Jun  1 08:05:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:32 2013] Updating source flux to 4.9e-14
[Sat Jun  1 08:06:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:21 2013] xmm0112660101/analysis//spectral/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete