[Fri May 31 21:39:12 2013] Detection parameters:
  Position = (435.5, 372.9) = 5 34 41.83 -5 47 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.9 +/- 8.3
  Background counts = 6.6
  Rate = 0.002 +/- 0.0004

[Fri May 31 21:39:14 2013] Off-axis axis estimate = 11.31'
[Fri May 31 21:40:58 2013] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:58 2013] Initial guess for spatial extent in simple fitting = 12.08"
[Fri May 31 21:40:58 2013] source mask rpix=2.8, npix_max = 42, mask sum = 33, frac = 0.768
[Fri May 31 21:40:58 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 12.08"
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src60.ximg exists
[Fri May 31 21:41:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src60.csv
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src60_1.ximg exists
[Fri May 31 21:41:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src60.csv
[Fri May 31 21:41:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:41:03 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Fri May 31 21:41:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Fri May 31 21:41:03 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Fri May 31 21:41:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Fri May 31 21:41:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:42:31 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 11.197566 pixels away
[Fri May 31 21:42:31 2013] Spatial fit model total counts = 144.282000, observed total counts = 95.000000
[Fri May 31 21:42:31 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:42:31 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:31 2013] Assessing source extent using major
[Fri May 31 21:42:31 2013] Source does appear to be extended
[Fri May 31 21:42:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:24 2013] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:24 2013] Initial guess for spatial extent in simple fitting = 12.08"
[Fri May 31 21:43:24 2013] source mask rpix=2.8, npix_max = 42, mask sum = 33, frac = 0.768
[Fri May 31 21:43:24 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 12.08"
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src52.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src52.csv
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src52.csv
[Fri May 31 21:43:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:27 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri May 31 21:43:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Fri May 31 21:43:27 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri May 31 21:43:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Fri May 31 21:43:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:53 2013] Warning, spatial fit 52 centroid is now closest to src. 6
[Fri May 31 21:44:53 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:53 2013] Assessing source extent using major
[Fri May 31 21:44:53 2013] Source does appear to be extended
[Fri May 31 21:44:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 08:02:26 2013] XMMSAS src. selection expression = ellipse(37840.244263, 32390.090393, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 08:02:26 2013] Not overwriting source region fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_src.reg
[Sat Jun  1 08:02:26 2013] Extracting stamp from image fullrun_mos2_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (398, 335) - (473, 410)
[Sat Jun  1 08:02:26 2013] XMMSAS bgd. selection expression = annulus(37840.244263, 32390.090393, 1087.500000, 2175.000000, X, Y) && !ellipse(38354.350861, 29530.278687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36162.061310, 33978.273163, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 08:02:26 2013] Writing fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32.gif
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_src.evt and ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_bgd.evt exist, delete to re-create
[Sat Jun  1 08:02:28 2013] Mean detx,y = (12777.18, -8452.04) 
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_src.img and ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_bgd.img exist, delete to re-create
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_bgd.pi exist, delete to re-create
[Sat Jun  1 08:02:28 2013] Setting source spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sat Jun  1 08:02:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_bgd.lc exist, delete to re-create
[Sat Jun  1 08:02:46 2013] Not generating rmf since there are only 47 counts
[Sat Jun  1 08:02:46 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:02:46 2013] fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32.arf exists, delete to re-create
[Sat Jun  1 08:05:28 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:05:28 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 78.00
[Sat Jun  1 08:05:28 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_bgd.pi.gz = 212.00
[Sat Jun  1 08:05:28 2013] Got source and background scale factors 736188.000000, 4998044.000000
[Sat Jun  1 08:05:28 2013] User source parameters:
  Position = (435.5, 372.9) = 5 34 41.83 -5 47 52.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 46.8 +/- 9.9
  Background aperture counts = 31.2
  Rate = 0.002 +/- 0.0004

[Sat Jun  1 08:05:28 2013] Updating counts from extracted products
[Sat Jun  1 08:05:28 2013] Set source signif. to 46.77/5.59 = 8.37
[Sat Jun  1 08:05:33 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:33 2013] Using photon index=1.80, rate=0.00207, arf fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32.arf
[Sat Jun  1 08:05:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:33 2013] Updating source flux to 2.3e-13
[Sat Jun  1 08:06:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:21 2013] xmm0112660101/analysis//spectral/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete