[Fri May 31 21:39:12 2013] Detection parameters:
  Position = (273.1, 403.7) = 5 35 29.16 -5 45 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.9 +/- 16.3
  Background counts = 8.5
  Rate = 0.01 +/- 0.001

[Fri May 31 21:39:14 2013] Off-axis axis estimate = 7.85'
[Fri May 31 21:40:58 2013] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:58 2013] Initial guess for spatial extent in simple fitting = 10.35"
[Fri May 31 21:40:58 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.085
[Fri May 31 21:40:58 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.35"
[Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src15.ximg exists
[Fri May 31 21:41:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src15.csv
[Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri May 31 21:41:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src15.csv
[Fri May 31 21:41:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri May 31 21:41:01 2013] Fit fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri May 31 21:42:31 2013] Warning, spatial fit 15 centroid is now closest to src. 51
[Fri May 31 21:42:31 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 10.522117 pixels away
[Fri May 31 21:42:31 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:31 2013] Assessing source extent using major
[Fri May 31 21:42:31 2013] Source does appear to be extended
[Fri May 31 21:42:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:24 2013] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:24 2013] Initial guess for spatial extent in simple fitting = 10.35"
[Fri May 31 21:43:24 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.085
[Fri May 31 21:43:24 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.35"
[Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src15.ximg exists
[Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src15.csv
[Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src15.csv
[Fri May 31 21:43:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri May 31 21:43:26 2013] Fit fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri May 31 21:44:53 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 10.819634 pixels away
[Fri May 31 21:44:53 2013] Source 28 is offset by -4.559118 and -8.426591 pixels which is larger than
2 X fitted extent = 1.177591 x 1.177591, not incorporating fit results
[Fri May 31 21:44:53 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:53 2013] Assessing source extent using major
[Fri May 31 21:44:53 2013] Source does appear to be extended
[Fri May 31 21:44:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 08:02:25 2013] XMMSAS src. selection expression = ellipse(23713.592712, 35074.274567, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 08:02:25 2013] Not overwriting source region fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_src.reg
[Sat Jun  1 08:02:25 2013] Extracting stamp from image fullrun_mos2_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (236, 366) - (311, 441)
[Sat Jun  1 08:02:25 2013] XMMSAS bgd. selection expression = annulus(23713.592712, 35074.274567, 1087.500000, 2175.000000, X, Y) && !ellipse(22798.905000, 36485.036000, 425.151212, 286.011208, 353.510710, X, Y) && !ellipse(22788.503510, 36901.001099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24804.169891, 35007.320038, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 08:02:25 2013] Writing fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28.gif
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_src.evt and ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sat Jun  1 08:02:27 2013] Mean detx,y = (-1334.07, -10675.95) 
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_src.img and ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_bgd.img exist, delete to re-create
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sat Jun  1 08:02:27 2013] Setting source spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jun  1 08:02:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sat Jun  1 08:02:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 08:02:46 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:02:46 2013] fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28.arf exists, delete to re-create
[Sat Jun  1 08:05:16 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:05:16 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 193.00
[Sat Jun  1 08:05:17 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 379.00
[Sat Jun  1 08:05:17 2013] Got source and background scale factors 1339200.000000, 8147811.000000
[Sat Jun  1 08:05:17 2013] User source parameters:
  Position = (273.1, 403.7) = 5 35 29.16 -5 45 37.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 130.7 +/- 14.9
  Background aperture counts = 62.3
  Rate = 0.006 +/- 0.0007

[Sat Jun  1 08:05:17 2013] Updating counts from extracted products
[Sat Jun  1 08:05:17 2013] Set source signif. to 130.71/7.89 = 16.56
[Sat Jun  1 08:05:30 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:30 2013] Using photon index=1.80, rate=0.00579, arf fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28.arf
[Sat Jun  1 08:05:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:30 2013] Updating source flux to 1.2e-13
[Sat Jun  1 08:06:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:21 2013] xmm0112660101/analysis//spectral/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete