[Fri May 31 21:39:11 2013] Detection parameters:
  Position = (363.8, 130.8) = 5 35 2.71 -6 5 25.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.2 +/- 10.6
  Background counts = 6.8
  Rate = 0.003 +/- 0.0005

[Fri May 31 21:39:14 2013] Off-axis axis estimate = 13.05'
[Fri May 31 21:40:58 2013] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:58 2013] Initial guess for spatial extent in simple fitting = 12.95"
[Fri May 31 21:40:58 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Fri May 31 21:40:58 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 12.95"
[Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src53.ximg exists
[Fri May 31 21:41:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src53.csv
[Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri May 31 21:41:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src53.csv
[Fri May 31 21:41:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:41:02 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri May 31 21:41:02 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri May 31 21:41:02 2013] Fit fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Fri May 31 21:42:31 2013] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 16.104607 pixels away
[Fri May 31 21:42:31 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:31 2013] Assessing source extent using major
[Fri May 31 21:42:31 2013] Source does appear to be extended
[Fri May 31 21:42:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:24 2013] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 21:43:24 2013] Initial guess for spatial extent in simple fitting = 12.95"
[Fri May 31 21:43:24 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Fri May 31 21:43:24 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 12.95"
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src49.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src49.csv
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src49.csv
[Fri May 31 21:43:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:27 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri May 31 21:43:27 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri May 31 21:43:27 2013] Fit fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Fri May 31 21:44:53 2013] Spatial fit model total counts = 144.335000, observed total counts = 137.000000
[Fri May 31 21:44:53 2013] Offset between fit and detection position for source 25 = 0.221446 pixels
[Fri May 31 21:44:53 2013] 145.274100 total counts/ 103.769000 bgd. counts: snr = 4.074437
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.221446 pixels
  Position = (363.6, 130.7) = 5 35 2.77 -6 5 25.3
  Extent = 4.5 (3.2-5.8)", rotation angle = 0
  Source counts = 41.5 +/- 12.1
  Background counts = 103.8
  Rate = 0.002 +/- 0.0005
[Fri May 31 21:44:53 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:53 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:53 2013] Source does appear to be extended
[Fri May 31 21:44:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 08:02:26 2013] XMMSAS src. selection expression = ellipse(31585.825200, 11318.098200, 271.698008, 271.698008, 0.000000, X, Y)
[Sat Jun  1 08:02:26 2013] Not overwriting source region fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_src.reg
[Sat Jun  1 08:02:26 2013] Extracting stamp from image fullrun_mos2_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (348, 115) - (379, 146)
[Sat Jun  1 08:02:26 2013] XMMSAS bgd. selection expression = annulus(31585.825200, 11318.098200, 452.830013, 905.660026, X, Y)
[Sat Jun  1 08:02:26 2013] Writing fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25.gif
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Sat Jun  1 08:02:28 2013] Mean detx,y = (7289.61, 12800.61) 
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_src.img and ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Sat Jun  1 08:02:28 2013] Setting source spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jun  1 08:02:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Jun  1 08:02:28 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Sat Jun  1 08:02:46 2013] Not generating rmf since there are only 41 counts
[Sat Jun  1 08:02:46 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:02:46 2013] fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Sat Jun  1 08:05:27 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:05:27 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 49.00
[Sat Jun  1 08:05:27 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_bgd.pi.gz = 76.00
[Sat Jun  1 08:05:27 2013] Got source and background scale factors 224780.000000, 1716788.000000
[Sat Jun  1 08:05:27 2013] User source parameters:
  Position = (363.6, 130.7) = 5 35 2.77 -6 5 25.3
  Extent = 4.5 (3.2-5.8)", rotation angle = 0
  Source aperture counts = 39.0 +/- 8.1
  Background aperture counts = 10.0
  Rate = 0.002 +/- 0.0004

[Sat Jun  1 08:05:33 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:33 2013] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25.arf
[Sat Jun  1 08:05:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:33 2013] Updating source flux to 1.1e-13
[Sat Jun  1 08:06:14 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 08:06:21 2013] xmm0112660101/analysis//spectral/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete