[Fri May 31 21:39:11 2013] Detection parameters: Position = (358.2, 193.1) = 5 35 4.36 -6 0 52.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 277.5 +/- 20.9 Background counts = 6.6 Rate = 0.01 +/- 0.0009 [Fri May 31 21:39:14 2013] Off-axis axis estimate = 8.78' [Fri May 31 21:40:58 2013] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting [Fri May 31 21:40:58 2013] Initial guess for spatial extent in simple fitting = 10.82" [Fri May 31 21:40:58 2013] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.925 [Fri May 31 21:40:58 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.82" [Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src13.ximg exists [Fri May 31 21:41:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src13.csv [Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src13_1.ximg exists [Fri May 31 21:41:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src13.csv [Fri May 31 21:41:00 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Fri May 31 21:41:01 2013] Fit fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Fri May 31 21:42:31 2013] Warning, spatial fit 13 centroid is now closest to src. 17 [Fri May 31 21:42:31 2013] Source 19 is offset by 5.042726 and 2.938127 pixels which is larger than 2 X fitted extent = 9.858713 x 1.232340, not incorporating fit results [Fri May 31 21:42:31 2013] Source 19 is offset by 3.766841 and -4.337758 pixels which is larger than 2 X fitted extent = 1.322855 x 1.322855, not incorporating fit results [Fri May 31 21:42:31 2013] Source 19 is offset by 4.987990 and 4.639943 pixels which is larger than 2 X fitted extent = 1.535508 x 1.535508, not incorporating fit results [Fri May 31 21:42:31 2013] Vigneting correction estimate = 1.000000 [Fri May 31 21:42:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 31 21:42:31 2013] Assessing source extent using major [Fri May 31 21:42:31 2013] Source does appear to be extended [Fri May 31 21:42:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 31 21:43:24 2013] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting [Fri May 31 21:43:24 2013] Initial guess for spatial extent in simple fitting = 10.82" [Fri May 31 21:43:24 2013] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.925 [Fri May 31 21:43:24 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.82" [Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src13.ximg exists [Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src13.csv [Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src13_1.ximg exists [Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src13.csv [Fri May 31 21:43:25 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Fri May 31 21:43:26 2013] Fit fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Fri May 31 21:44:53 2013] Warning, spatial fit 13 centroid is now closest to src. 41 [Fri May 31 21:44:53 2013] Spatial fit model total counts = 1071.470000, observed total counts = 800.000000 [Fri May 31 21:44:53 2013] Poor agreement between spatial fit and data for source 19 It may help to tweak spatial fit manually Not incorporating fit results [Fri May 31 21:44:53 2013] Source 19 is offset by 2.851669 and -5.252930 pixels which is larger than 2 X fitted extent = 1.208460 x 1.208460, not incorporating fit results [Fri May 31 21:44:53 2013] Vigneting correction estimate = 1.000000 [Fri May 31 21:44:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 31 21:44:53 2013] Assessing source extent using major [Fri May 31 21:44:53 2013] Source does appear to be extended [Fri May 31 21:44:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 1 08:02:25 2013] XMMSAS src. selection expression = ellipse(31113.507172, 16749.407059, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 1 08:02:25 2013] Not overwriting source region fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_src.reg [Sat Jun 1 08:02:25 2013] Extracting stamp from image fullrun_mos2_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (321, 156) - (396, 231) [Sat Jun 1 08:02:25 2013] XMMSAS bgd. selection expression = annulus(31113.507172, 16749.407059, 1087.500000, 2175.000000, X, Y) && !ellipse(32127.505341, 17118.073807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31558.110413, 17295.352768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31725.446289, 18018.410172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32839.254816, 18124.816489, 628.789167, 374.927609, 73.616777, X, Y) && !ellipse(29761.130000, 15402.392000, 578.041617, 258.450407, 359.732218, X, Y) && !ellipse(29291.514557, 15743.371323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29098.642609, 17349.718475, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 1 08:02:25 2013] Writing fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19.gif [Sat Jun 1 08:02:27 2013] ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_src.evt and ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_bgd.evt exist, delete to re-create [Sat Jun 1 08:02:27 2013] Mean detx,y = (6654.55, 7307.71) [Sat Jun 1 08:02:27 2013] ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_src.img and ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_bgd.img exist, delete to re-create [Sat Jun 1 08:02:27 2013] ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_bgd.pi exist, delete to re-create [Sat Jun 1 08:02:27 2013] Setting source spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Sat Jun 1 08:02:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_bgd.pi.gz [Sat Jun 1 08:02:27 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_bgd.lc exist, delete to re-create [Sat Jun 1 08:02:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat Jun 1 08:02:46 2013] rmf not generated due to insufficient counts [Sat Jun 1 08:02:46 2013] fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19.arf exists, delete to re-create [Sat Jun 1 08:05:16 2013] Updating aperture counts using extracted products [Sat Jun 1 08:05:16 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 363.00 [Sat Jun 1 08:05:16 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 165.00 [Sat Jun 1 08:05:16 2013] Got source and background scale factors 1173524.000000, 4200677.000000 [Sat Jun 1 08:05:16 2013] User source parameters: Position = (358.2, 193.1) = 5 35 4.36 -6 0 52.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 316.9 +/- 20.1 Background aperture counts = 46.1 Rate = 0.01 +/- 0.0009 [Sat Jun 1 08:05:16 2013] Updating counts from extracted products [Sat Jun 1 08:05:16 2013] Set source signif. to 316.90/6.79 = 46.68 [Sat Jun 1 08:05:30 2013] Calculating source flux in energy range 0.30-8.00 [Sat Jun 1 08:05:30 2013] Using photon index=1.80, rate=0.014, arf fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19.arf [Sat Jun 1 08:05:30 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jun 1 08:05:30 2013] Updating source flux to 4.2e-13 [Sat Jun 1 08:06:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat Jun 1 08:06:21 2013] xmm0112660101/analysis//spectral/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete