[Fri May 31 21:39:11 2013] Detection parameters:
  Position = (365.2, 207.7) = 5 35 2.31 -6 0 7.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230.7 +/- 31.8
  Background counts = 9.5
  Rate = 0.01 +/- 0.001

[Fri May 31 21:39:14 2013] Off-axis axis estimate = 8.17'
[Fri May 31 21:40:58 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:58 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Fri May 31 21:40:58 2013] source mask rpix=2.4, npix_max = 34, mask sum = 26, frac = 0.764
[Fri May 31 21:40:58 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.51"
[Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src19.ximg exists
[Fri May 31 21:41:00 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri May 31 21:41:00 2013] Fit fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src19 appears to have run properly
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri May 31 21:41:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri May 31 21:41:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri May 31 21:41:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:42:31 2013] Warning, spatial fit 19 centroid is now closest to src. 19
[Fri May 31 21:42:31 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:31 2013] Assessing source extent using major
[Fri May 31 21:42:31 2013] Source does appear to be extended
[Fri May 31 21:42:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:24 2013] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:24 2013] Initial guess for spatial extent in simple fitting = 10.51"
[Fri May 31 21:43:24 2013] source mask rpix=2.4, npix_max = 34, mask sum = 26, frac = 0.764
[Fri May 31 21:43:24 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 10.51"
[Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src19.ximg exists
[Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src19.csv
[Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src19.csv
[Fri May 31 21:43:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May 31 21:43:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 31 21:43:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:53 2013] Warning, spatial fit 19 centroid is now closest to src. 19
[Fri May 31 21:44:53 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:53 2013] Assessing source extent using major
[Fri May 31 21:44:53 2013] Source does appear to be extended
[Fri May 31 21:44:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 08:02:26 2013] XMMSAS src. selection expression = ellipse(31725.446289, 18018.410172, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 08:02:26 2013] Not overwriting source region fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_src.reg
[Sat Jun  1 08:02:26 2013] Extracting stamp from image fullrun_mos2_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (328, 170) - (403, 245)
[Sat Jun  1 08:02:26 2013] XMMSAS bgd. selection expression = annulus(31725.446289, 18018.410172, 1087.500000, 2175.000000, X, Y) && !ellipse(31113.507172, 16749.407059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32127.505341, 17118.073807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31558.110413, 17295.352768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32839.254816, 18124.816489, 628.789167, 374.927609, 73.616777, X, Y) && !ellipse(29761.130000, 15402.392000, 578.041617, 258.450407, 359.732218, X, Y) && !ellipse(29291.514557, 15743.371323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29098.642609, 17349.718475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33752.859800, 16543.288200, 360.331210, 360.331210, 0.000000, X, Y)
[Sat Jun  1 08:02:26 2013] Writing fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15.gif
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sat Jun  1 08:02:27 2013] Mean detx,y = (7198.14, 6316.37) 
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_src.img and ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sat Jun  1 08:02:27 2013] Setting source spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun  1 08:02:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sat Jun  1 08:02:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 08:02:46 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:02:46 2013] fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Sat Jun  1 08:05:18 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:05:18 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 339.00
[Sat Jun  1 08:05:18 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 210.00
[Sat Jun  1 08:05:18 2013] Got source and background scale factors 890008.000000, 4517956.000000
[Sat Jun  1 08:05:18 2013] User source parameters:
  Position = (365.2, 207.7) = 5 35 2.31 -6 0 7.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 297.6 +/- 19.4
  Background aperture counts = 41.4
  Rate = 0.01 +/- 0.0009

[Sat Jun  1 08:05:18 2013] Updating counts from extracted products
[Sat Jun  1 08:05:18 2013] Set source signif. to 297.63/6.43 = 46.27
[Sat Jun  1 08:05:30 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:30 2013] Using photon index=1.80, rate=0.0132, arf fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15.arf
[Sat Jun  1 08:05:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:30 2013] Updating source flux to 4.5e-13
[Sat Jun  1 08:06:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:21 2013] xmm0112660101/analysis//spectral/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete