[Fri May 31 21:39:10 2013] Detection parameters:
  Position = (284.3, 280.0) = 5 35 25.90 -5 54 35.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26153.7 +/- 192.1
  Background counts = 11.9
  Rate = 1 +/- 0.009

[Fri May 31 21:39:14 2013] Off-axis axis estimate = 1.68'
[Fri May 31 21:40:58 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:58 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Fri May 31 21:40:58 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.849
[Fri May 31 21:40:58 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri May 31 21:40:59 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src1.ximg exists
[Fri May 31 21:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src1.csv
[Fri May 31 21:40:59 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri May 31 21:40:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src1.csv
[Fri May 31 21:40:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri May 31 21:41:01 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 31 21:41:01 2013] Fit fullrun_mos2_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May 31 21:42:31 2013] Spatial fit model total counts = 24628.900000, observed total counts = 23228.000000
[Fri May 31 21:42:31 2013] Offset between fit and detection position for source 1 = 0.058227 pixels
[Fri May 31 21:42:31 2013] 24462.980000 total counts/ 6547.880000 bgd. counts: snr = 221.395547
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.058227 pixels
  Position = (284.4, 280.1) = 5 35 25.88 -5 54 35.4
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 17915.1 +/- 156.4
  Background counts = 6547.9
  Rate = 0.8 +/- 0.007
[Fri May 31 21:42:31 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:31 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:42:31 2013] Source does appear to be extended
[Fri May 31 21:42:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:24 2013] Initial guess for spatial extent in simple fitting = 5.31"
[Fri May 31 21:43:24 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.013
[Fri May 31 21:43:24 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 5.31"
[Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src1.ximg exists
[Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src1.csv
[Fri May 31 21:43:25 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May 31 21:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src1.csv
[Fri May 31 21:43:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May 31 21:43:26 2013] fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 31 21:43:26 2013] Fit fullrun_mos2_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri May 31 21:44:52 2013] Spatial fit model total counts = 24649.300000, observed total counts = 23228.000000
[Fri May 31 21:44:52 2013] Offset between fit and detection position for source 1 = 0.000038 pixels
[Fri May 31 21:44:52 2013] 24482.640000 total counts/ 6559.240000 bgd. counts: snr = 221.306228
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000038 pixels
  Position = (284.4, 280.1) = 5 35 25.88 -5 54 35.4
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 17923.4 +/- 156.5
  Background counts = 6559.2
  Rate = 0.8 +/- 0.007
[Fri May 31 21:44:53 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:53 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:53 2013] Source does appear to be extended
[Fri May 31 21:44:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 08:02:25 2013] Counts = 17923.400000, rescaling region sizes by 3.000000
[Sat Jun  1 08:02:25 2013] XMMSAS src. selection expression = ellipse(24690.764800, 24317.756400, 955.094427, 955.094427, 0.000000, X, Y)
[Sat Jun  1 08:02:25 2013] Not overwriting source region fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  1 08:02:25 2013] Extracting stamp from image fullrun_mos2_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (229, 225) - (339, 335)
[Sat Jun  1 08:02:25 2013] XMMSAS bgd. selection expression = annulus(24690.764800, 24317.756400, 4775.472137, 9550.944275, X, Y) && !ellipse(23558.047821, 31493.776398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24366.347595, 31406.221497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17380.918400, 27757.485200, 507.160015, 507.160015, 0.000000, X, Y) && !ellipse(33964.711273, 33705.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31113.507172, 16749.407059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32127.505341, 17118.073807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25455.828680, 16132.157400, 454.727213, 454.727213, 0.000000, X, Y) && !ellipse(31558.110413, 17295.352768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31725.446289, 18018.410172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27734.977081, 15451.987167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29375.809082, 33952.142365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23468.026398, 14162.581482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32042.889557, 22751.972961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18965.683000, 16482.234400, 338.478410, 338.478410, 0.000000, X, Y) && !ellipse(18087.273666, 15938.205338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32839.254816, 18124.816489, 628.789167, 374.927609, 73.616777, X, Y) && !ellipse(29761.130000, 15402.392000, 578.041617, 258.450407, 359.732218, X, Y) && !ellipse(29291.514557, 15743.371323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29098.642609, 17349.718475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33069.510800, 25697.111200, 861.536025, 861.536025, 0.000000, X, Y) && !ellipse(31598.695190, 28542.923737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33752.859800, 16543.288200, 360.331210, 360.331210, 0.000000, X, Y) && !ellipse(25730.832000, 14750.708000, 1721.584050, 1721.584050, 0.000000, X, Y)
[Sat Jun  1 08:02:25 2013] Writing fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1.gif
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0112660101/products/events/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Jun  1 08:02:27 2013] Mean detx,y = (26.49, 4.75) 
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0112660101/products/images/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Jun  1 08:02:27 2013] Setting source spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  1 08:02:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  1 08:02:27 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Jun  1 08:02:46 2013] fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Sat Jun  1 08:02:46 2013] fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Sat Jun  1 08:05:11 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:05:12 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 24129.00
[Sat Jun  1 08:05:12 2013] Total counts from fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 3945.00
[Sat Jun  1 08:05:12 2013] Got source and background scale factors 2634692.000000, 81585355.000000
[Sat Jun  1 08:05:12 2013] User source parameters:
  Position = (284.4, 280.1) = 5 35 25.88 -5 54 35.4
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source aperture counts = 24001.6 +/- 156.3
  Background aperture counts = 127.4
  Rate = 1 +/- 0.007

[Sat Jun  1 08:05:29 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:29 2013] Using photon index=1.80, rate=0.794, arf fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1.arf
[Sat Jun  1 08:05:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:29 2013] Updating source flux to 1e-11
[Sat Jun  1 08:06:21 2013] xmm0112660101/analysis//spectral/fullrun_mos2_xmm0112660101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete