[Fri May 31 21:39:08 2013] Detection parameters:
  Position = (356.9, 200.5) = 5 35 4.74 -6 0 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.3 +/- 10.0
  Background counts = 9.1
  Rate = 0.002 +/- 0.0004

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 8.27'
[Fri May 31 21:40:53 2013] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 10.56"
[Fri May 31 21:40:53 2013] source mask rpix=2.4, npix_max = 34, mask sum = 25, frac = 0.729
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 96 for pass 0, mean size = 10.56"
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src96.ximg exists
[Fri May 31 21:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src96.csv
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src96_1.ximg exists
[Fri May 31 21:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src96.csv
[Fri May 31 21:40:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:58 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Fri May 31 21:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src96.csv
[Fri May 31 21:40:58 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Fri May 31 21:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src96.csv
[Fri May 31 21:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 973.116000, observed total counts = 1244.000000
[Fri May 31 21:42:12 2013] Poor agreement between spatial fit and data for source 96
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:42:13 2013] Warning, spatial fit 96 centroid is now closest to src. 34
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:42:13 2013] Source is confused with source 34
[Fri May 31 21:43:20 2013] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 10.56"
[Fri May 31 21:43:20 2013] source mask rpix=2.4, npix_max = 34, mask sum = 25, frac = 0.729
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 88 for pass 1, mean size = 10.56"
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src88.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src88.csv
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src88_1.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src88.csv
[Fri May 31 21:43:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Fri May 31 21:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src88.csv
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Fri May 31 21:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src88.csv
[Fri May 31 21:43:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:35 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 96 at 11.496586 pixels away
[Fri May 31 21:44:36 2013] Warning: source 88 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 96 at 10.343220 pixels away
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:26 2013] XMMSAS src. selection expression = ellipse(30999.794922, 17392.517548, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 04:58:26 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src96_src.reg
[Sat Jun  1 04:58:26 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (319, 163) - (394, 238)
[Sat Jun  1 04:58:26 2013] XMMSAS bgd. selection expression = annulus(30999.794922, 17392.517548, 1087.500000, 2175.000000, X, Y) && !ellipse(31657.325880, 17700.127953, 472.187483, 377.732085, 121.088247, X, Y) && !ellipse(29737.466400, 19865.141400, 414.388812, 414.388812, 0.000000, X, Y) && !ellipse(32131.554260, 17164.536819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31086.569244, 16812.607376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29757.883600, 15423.212400, 689.225620, 279.760808, 320.120700, X, Y) && !ellipse(32908.429040, 17858.093600, 497.052814, 497.052814, 0.000000, X, Y) && !ellipse(29068.659400, 17392.674800, 611.247218, 611.247218, 0.000000, X, Y) && !ellipse(29305.864990, 15751.029755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33763.542358, 16588.579987, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:26 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src96.gif
[Sat Jun  1 05:36:52 2013] Mean detx,y = (7113.79, -6874.42) 
[Sat Jun  1 05:36:54 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:37:28 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:37:28 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sat Jun  1 05:37:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Sat Jun  1 08:00:24 2013] Not generating rmf since there are only 46 counts
[Sat Jun  1 08:00:24 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:05:02 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:05:03 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src96_src_b10.pi.gz = 432.00
[Sat Jun  1 08:05:03 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src96_bgd.pi.gz = 328.00
[Sat Jun  1 08:05:03 2013] Got source and background scale factors 892998.000000, 6308434.000000
[Sat Jun  1 08:05:03 2013] User source parameters:
  Position = (356.9, 200.5) = 5 35 4.74 -6 0 20.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 385.6 +/- 21.8
  Background aperture counts = 46.4
  Rate = 0.02 +/- 0.001

[Sat Jun  1 08:05:03 2013] Updating counts from extracted products
[Sat Jun  1 08:05:03 2013] Set source signif. to 385.57/6.81 = 56.59
[Sat Jun  1 08:05:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:11 2013] Using photon index=1.80, rate=0.0171, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src96.arf
[Sat Jun  1 08:05:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:11 2013] Updating source flux to 4.4e-13
[Sat Jun  1 08:05:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:14 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src96_pl.csv not found, spectral fit skipped or did not complete