[Fri May 31 21:39:07 2013] Detection parameters:
  Position = (260.1, 217.8) = 5 35 32.97 -5 59 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.1 +/- 14.8
  Background counts = 10.9
  Rate = 0.007 +/- 0.0008

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 6.47'
[Fri May 31 21:40:53 2013] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 9.67"
[Fri May 31 21:40:53 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.215
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 9.67"
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src41.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src41.csv
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src41_1.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src41.csv
[Fri May 31 21:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:57 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Fri May 31 21:40:57 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Fri May 31 21:40:57 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Fri May 31 21:42:12 2013] Warning, spatial fit 41 centroid is now closest to src. 85
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 264.686000, observed total counts = 260.000000
[Fri May 31 21:42:12 2013] Offset between fit and detection position for source 88 = 0.137343 pixels
[Fri May 31 21:42:12 2013] Warning, changing simple spatial fit ID from 41 to 64
[Fri May 31 21:42:12 2013] 266.667800 total counts/ 200.112000 bgd. counts: snr = 4.704889
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 0.137343 pixels
  Position = (260.1, 217.7) = 5 35 32.96 -5 59 6.7
  Extent = 4.2" x 3.6", rotation angle = 0
  Source counts = 66.6 +/- 16.3
  Background counts = 200.1
  Rate = 0.003 +/- 0.0007
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.17
[Fri May 31 21:42:13 2013] Source is confused with source 90
[Fri May 31 21:43:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 3.88"
[Fri May 31 21:43:20 2013] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.774
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 3.88"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src41.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src41.csv
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src41.csv
[Fri May 31 21:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:23 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri May 31 21:43:23 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri May 31 21:43:23 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Fri May 31 21:44:36 2013] Spatial fit model total counts = 406.999000, observed total counts = 407.000000
[Fri May 31 21:44:36 2013] Offset between fit and detection position for source 88 = 0.028803 pixels
[Fri May 31 21:44:36 2013] 251.305200 total counts/ 166.680000 bgd. counts: snr = 6.554778
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 0.028803 pixels
  Position = (260.1, 217.7) = 5 35 32.97 -5 59 6.7
  Extent = 5.0 (3.6-6.5)", rotation angle = 0
  Source counts = 84.6 +/- 15.9
  Background counts = 166.7
  Rate = 0.004 +/- 0.0007
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:24 2013] XMMSAS src. selection expression = ellipse(22577.479060, 18891.771400, 298.795209, 298.795209, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src88_src.reg
[Sat Jun  1 04:58:24 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (243, 201) - (277, 235)
[Sat Jun  1 04:58:24 2013] XMMSAS bgd. selection expression = annulus(22577.479060, 18891.771400, 497.992014, 995.984029, X, Y) && !ellipse(23117.138800, 19555.886200, 423.928012, 423.928012, 0.000000, X, Y) && !ellipse(23990.972167, 18745.306734, 474.796741, 385.724420, 12.745597, X, Y) && !ellipse(21464.445000, 19101.377600, 315.546409, 315.546409, 0.000000, X, Y) && !ellipse(22053.634868, 20517.857598, 1592.016046, 1381.998232, 0.000000, X, Y) && !ellipse(22902.404266, 18343.780029, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src88.gif
[Sat Jun  1 05:12:36 2013] Mean detx,y = (5696.43, 1790.77) 
[Sat Jun  1 05:12:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:12:54 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:12:54 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sat Jun  1 05:12:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Sat Jun  1 07:38:44 2013] Not generating rmf since there are only 84 counts
[Sat Jun  1 07:38:44 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:04:46 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:46 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src88_src_b10.pi.gz = 111.00
[Sat Jun  1 08:04:46 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src88_bgd.pi.gz = 26.00
[Sat Jun  1 08:04:46 2013] Got source and background scale factors 280000.000000, 430212.000000
[Sat Jun  1 08:04:46 2013] User source parameters:
  Position = (260.1, 217.7) = 5 35 32.97 -5 59 6.7
  Extent = 5.0 (3.6-6.5)", rotation angle = 0
  Source aperture counts = 94.1 +/- 11.6
  Background aperture counts = 16.9
  Rate = 0.004 +/- 0.0005

[Sat Jun  1 08:05:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:08 2013] Using photon index=1.80, rate=0.00375, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src88.arf
[Sat Jun  1 08:05:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:08 2013] Updating source flux to 7.6e-14
[Sat Jun  1 08:05:42 2013] Flag c found in src. 88 procflags, skipping spectral fitting
[Sat Jun  1 08:05:42 2013] Source 88 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src88_pl.csv not found, spectral fit skipped or did not complete