[Fri May 31 21:39:07 2013] Detection parameters:
  Position = (352.5, 246.2) = 5 35 6.00 -5 57 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.1 +/- 12.8
  Background counts = 10.0
  Rate = 0.006 +/- 0.0008

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 5.45'
[Fri May 31 21:40:53 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 9.15"
[Fri May 31 21:40:53 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.921
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 9.15"
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src44.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src44.csv
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src44.csv
[Fri May 31 21:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:57 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri May 31 21:40:57 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri May 31 21:40:57 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 162.430000, observed total counts = 155.000000
[Fri May 31 21:42:12 2013] Offset between fit and detection position for source 83 = 0.281802 pixels
[Fri May 31 21:42:12 2013] 161.379400 total counts/ 84.293600 bgd. counts: snr = 8.396090
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 0.281802 pixels
  Position = (352.3, 246.4) = 5 35 6.07 -5 57 1.8
  Extent = 5.6 (4.5-7.2)", rotation angle = 0
  Source counts = 77.1 +/- 12.7
  Background counts = 84.3
  Rate = 0.003 +/- 0.0006
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 5.57"
[Fri May 31 21:43:20 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.710
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 5.57"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src44.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src44.csv
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src44.csv
[Fri May 31 21:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:23 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri May 31 21:43:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May 31 21:43:23 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri May 31 21:43:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May 31 21:43:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:36 2013] Warning, spatial fit 44 centroid is now closest to src. 75
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:24 2013] XMMSAS src. selection expression = ellipse(30603.687600, 21389.836800, 334.152010, 334.152010, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src83_src.reg
[Sat Jun  1 04:58:24 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (333, 227) - (372, 266)
[Sat Jun  1 04:58:24 2013] XMMSAS bgd. selection expression = annulus(30603.687600, 21389.836800, 556.920016, 1113.840032, X, Y) && !ellipse(29737.466400, 19865.141400, 414.388812, 414.388812, 0.000000, X, Y) && !ellipse(32036.886536, 22734.359497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.025513, 21272.809677, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src83.gif
[Sat Jun  1 05:13:48 2013] Mean detx,y = (2998.03, -6159.75) 
[Sat Jun  1 05:13:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:14:06 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:14:06 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sat Jun  1 05:14:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Sat Jun  1 07:39:15 2013] Not generating rmf since there are only 77 counts
[Sat Jun  1 07:39:15 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:04:47 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:47 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src83_src_b10.pi.gz = 92.00
[Sat Jun  1 08:04:47 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src83_bgd.pi.gz = 93.00
[Sat Jun  1 08:04:47 2013] Got source and background scale factors 350400.000000, 2088840.000000
[Sat Jun  1 08:04:47 2013] User source parameters:
  Position = (352.3, 246.4) = 5 35 6.07 -5 57 1.8
  Extent = 5.6 (4.5-7.2)", rotation angle = 0
  Source aperture counts = 76.4 +/- 10.6
  Background aperture counts = 15.6
  Rate = 0.003 +/- 0.0005

[Sat Jun  1 08:05:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:08 2013] Using photon index=1.80, rate=0.00342, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src83.arf
[Sat Jun  1 08:05:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:08 2013] Updating source flux to 7.3e-14
[Sat Jun  1 08:05:42 2013] Source 83 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src83_pl.csv not found, spectral fit skipped or did not complete