[Fri May 31 21:39:06 2013] Detection parameters:
  Position = (286.3, 296.9) = 5 35 25.31 -5 53 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.8 +/- 13.7
  Background counts = 12.3
  Rate = 0.004 +/- 0.0006

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 0.89'
[Fri May 31 21:40:53 2013] Using EEF radius (= 6.87 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 6.87"
[Fri May 31 21:40:53 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.925
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 6.87"
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src70.ximg exists
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src70_1.ximg exists
[Fri May 31 21:40:55 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src70 appears to have run properly
[Fri May 31 21:40:58 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Fri May 31 21:40:58 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Fri May 31 21:40:58 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 585.856000, observed total counts = 587.000000
[Fri May 31 21:42:12 2013] Offset between fit and detection position for source 68 = 6.127322 pixels
[Fri May 31 21:42:12 2013] 543.850000 total counts/ 430.170000 bgd. counts: snr = 5.481053
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 6.127322 pixels
  Position = (283.1, 291.7) = 5 35 26.27 -5 53 44.8
  Extent = 13.7 (13.7-27.5)" x 8.4 (5.2-12.4)", rotation angle = 120 (99-148) degrees
  Source counts = 113.7 +/- 23.3
  Background counts = 430.2
  Rate = 0.005 +/- 0.001
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Fri May 31 21:43:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 11.05"
[Fri May 31 21:43:20 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.973
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 68 for pass 1, mean size = 11.05"
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src68.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src68.csv
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src68_1.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src68.csv
[Fri May 31 21:43:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Fri May 31 21:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Fri May 31 21:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src68.csv
[Fri May 31 21:43:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:36 2013] Spatial fit model total counts = 1266.180000, observed total counts = 1435.000000
[Fri May 31 21:44:36 2013] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Sat Jun  1 04:58:25 2013] XMMSAS src. selection expression = ellipse(24576.856000, 25328.558000, 824.616024, 501.753014, 120.097800, X, Y)
[Sat Jun  1 04:58:25 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src68_src.reg
[Sat Jun  1 04:58:25 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (236, 244) - (330, 339)
[Sat Jun  1 04:58:25 2013] XMMSAS bgd. selection expression = annulus(24576.856000, 25328.558000, 1374.360040, 2748.720079, X, Y) && !ellipse(24686.649800, 24317.214800, 1385.220040, 1385.220040, 0.000000, X, Y) && !ellipse(25894.029820, 28477.814000, 449.364013, 449.364013, 0.000000, X, Y) && !ellipse(26028.998600, 25113.158000, 550.836016, 550.836016, 0.000000, X, Y) && !ellipse(23437.132020, 28284.976000, 388.904811, 388.904811, 0.000000, X, Y) && !ellipse(24881.287872, 22914.386414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26869.138800, 24898.195600, 233.107207, 233.107207, 0.000000, X, Y) && !ellipse(24854.356400, 28501.317200, 465.040813, 465.040813, 0.000000, X, Y) && !ellipse(25396.918457, 26826.553497, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:25 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src68.gif
[Sat Jun  1 05:25:58 2013] Mean detx,y = (-404.37, -163.53) 
[Sat Jun  1 05:26:00 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:26:20 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:26:20 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Jun  1 05:26:20 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sat Jun  1 08:04:56 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:56 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 1512.00
[Sat Jun  1 08:04:56 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src68_bgd.pi.gz = 1161.00
[Sat Jun  1 08:04:56 2013] Got source and background scale factors 1302400.000000, 11649028.000000
[Sat Jun  1 08:04:56 2013] User source parameters:
  Position = (283.1, 291.7) = 5 35 26.27 -5 53 44.8
  Extent = 13.7 (13.7-27.5)" x 8.4 (5.2-12.4)", rotation angle = 120 (99-148) degrees
  Source aperture counts = 1382.2 +/- 39.9
  Background aperture counts = 129.8
  Rate = 0.06 +/- 0.002

[Sat Jun  1 08:05:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:10 2013] Using photon index=1.80, rate=0.00504, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src68.arf
[Sat Jun  1 08:05:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:10 2013] Updating source flux to 6.8e-14
[Sat Jun  1 08:05:42 2013] Flag p found in src. 68 procflags, skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete