[Fri May 31 21:39:05 2013] Detection parameters:
  Position = (347.6, 314.0) = 5 35 7.46 -5 52 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.8 +/- 9.5
  Background counts = 9.8
  Rate = 0.003 +/- 0.0006

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 3.74'
[Fri May 31 21:40:53 2013] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 8.30"
[Fri May 31 21:40:53 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.863
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 8.30"
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src79.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src79.csv
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src79_1.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src79.csv
[Fri May 31 21:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:58 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Fri May 31 21:40:58 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Fri May 31 21:40:58 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Fri May 31 21:42:12 2013] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 10.496028 pixels away
[Fri May 31 21:42:13 2013] Spatial fit model total counts = 137.999000, observed total counts = 138.000000
[Fri May 31 21:42:13 2013] Offset between fit and detection position for source 63 = 0.093160 pixels
[Fri May 31 21:42:13 2013] 137.216900 total counts/ 106.672000 bgd. counts: snr = 2.957423
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.093160 pixels
  Position = (347.5, 313.9) = 5 35 7.47 -5 52 8.1
  Extent = 3.7 (2.1-5.0)", rotation angle = 0
  Source counts = 30.5 +/- 11.7
  Background counts = 106.7
  Rate = 0.001 +/- 0.0005
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 3.69"
[Fri May 31 21:43:20 2013] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.825
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 76 for pass 1, mean size = 3.69"
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src76.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src76.csv
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src76_1.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src76.csv
[Fri May 31 21:43:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Fri May 31 21:43:24 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Fri May 31 21:44:36 2013] Spatial fit model total counts = 137.999000, observed total counts = 138.000000
[Fri May 31 21:44:36 2013] Offset between fit and detection position for source 63 = 0.000081 pixels
[Fri May 31 21:44:36 2013] 137.217700 total counts/ 106.676000 bgd. counts: snr = 2.957058
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 0.000081 pixels
  Position = (347.5, 313.9) = 5 35 7.47 -5 52 8.1
  Extent = 3.7 (2.1-5.0)", rotation angle = 0
  Source counts = 30.5 +/- 11.7
  Background counts = 106.7
  Rate = 0.001 +/- 0.0005
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:25 2013] XMMSAS src. selection expression = ellipse(30185.113600, 27263.810800, 221.451006, 221.451006, 0.000000, X, Y)
[Sat Jun  1 04:58:25 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src63_src.reg
[Sat Jun  1 04:58:25 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (335, 301) - (360, 327)
[Sat Jun  1 04:58:25 2013] XMMSAS bgd. selection expression = annulus(30185.113600, 27263.810800, 369.085011, 738.170021, X, Y) && !ellipse(31639.601227, 28543.473328, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:25 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src63.gif
[Sat Jun  1 05:30:19 2013] Mean detx,y = (-2851.00, -5609.13) 
[Sat Jun  1 05:30:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:30:36 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:30:36 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Jun  1 05:30:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sat Jun  1 07:58:13 2013] Not generating rmf since there are only 30 counts
[Sat Jun  1 07:58:13 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:04:59 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:59 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 39.00
[Sat Jun  1 08:04:59 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src63_bgd.pi.gz = 58.00
[Sat Jun  1 08:04:59 2013] Got source and background scale factors 155200.000000, 1283200.000000
[Sat Jun  1 08:04:59 2013] User source parameters:
  Position = (347.5, 313.9) = 5 35 7.47 -5 52 8.1
  Extent = 3.7 (2.1-5.0)", rotation angle = 0
  Source aperture counts = 32.0 +/- 7.3
  Background aperture counts = 7.0
  Rate = 0.001 +/- 0.0003

[Sat Jun  1 08:05:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:10 2013] Using photon index=1.80, rate=0.00135, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src63.arf
[Sat Jun  1 08:05:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:10 2013] Updating source flux to 3.6e-14
[Sat Jun  1 08:05:42 2013] Source 63 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete