[Fri May 31 21:39:01 2013] Detection parameters:
  Position = (324.6, 436.1) = 5 35 14.14 -5 43 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.0 +/- 18.3
  Background counts = 10.1
  Rate = 0.01 +/- 0.0008

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 10.16'
[Fri May 31 21:40:53 2013] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 11.51"
[Fri May 31 21:40:53 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.910
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 11.51"
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src29.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src29.csv
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src29.csv
[Fri May 31 21:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri May 31 21:40:56 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 384.654000, observed total counts = 373.000000
[Fri May 31 21:42:12 2013] Offset between fit and detection position for source 5 = 0.258350 pixels
[Fri May 31 21:42:12 2013] 288.119000 total counts/ 157.275000 bgd. counts: snr = 10.433355
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.258350 pixels
  Position = (324.4, 436.1) = 5 35 14.22 -5 43 16.5
  Extent = 4.5 (3.8-5.3)", rotation angle = 0
  Source counts = 130.8 +/- 17.0
  Background counts = 157.3
  Rate = 0.006 +/- 0.0008
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:42:13 2013] Source is confused with source 4
[Fri May 31 21:43:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 4.54"
[Fri May 31 21:43:20 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.943
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 4.54"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src29.ximg exists
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri May 31 21:43:21 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src29 appears to have run properly
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri May 31 21:43:22 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri May 31 21:44:35 2013] Spatial fit model total counts = 385.638000, observed total counts = 373.000000
[Fri May 31 21:44:35 2013] Offset between fit and detection position for source 5 = 0.005829 pixels
[Fri May 31 21:44:35 2013] 288.522000 total counts/ 156.093000 bgd. counts: snr = 10.599647
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.005829 pixels
  Position = (324.4, 436.1) = 5 35 14.21 -5 43 16.5
  Extent = 4.5 (3.8-5.3)", rotation angle = 0
  Source counts = 132.4 +/- 17.0
  Background counts = 156.1
  Rate = 0.006 +/- 0.0008
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:24 2013] XMMSAS src. selection expression = ellipse(28173.958000, 37895.755200, 269.875208, 269.875208, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun  1 04:58:24 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (309, 421) - (340, 452)
[Sat Jun  1 04:58:24 2013] XMMSAS bgd. selection expression = annulus(28173.958000, 37895.755200, 449.792013, 899.584026, X, Y) && !ellipse(27096.864685, 38744.297668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28737.664825, 37885.706329, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src5.gif
[Sat Jun  1 05:06:32 2013] Mean detx,y = (-13441.47, -3341.76) 
[Sat Jun  1 05:06:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:06:50 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:06:51 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun  1 05:06:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun  1 08:04:42 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:42 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 155.00
[Sat Jun  1 08:04:42 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 31.00
[Sat Jun  1 08:04:42 2013] Got source and background scale factors 203404.000000, 586440.000000
[Sat Jun  1 08:04:43 2013] User source parameters:
  Position = (324.4, 436.1) = 5 35 14.21 -5 43 16.5
  Extent = 4.5 (3.8-5.3)", rotation angle = 0
  Source aperture counts = 144.2 +/- 13.5
  Background aperture counts = 10.8
  Rate = 0.006 +/- 0.0006

[Sat Jun  1 08:05:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:07 2013] Using photon index=1.80, rate=0.00587, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src5.arf
[Sat Jun  1 08:05:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:07 2013] Updating source flux to 2.4e-13
[Sat Jun  1 08:05:42 2013] Flag c found in src. 5 procflags, skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete