[Fri May 31 21:39:04 2013] Detection parameters:
  Position = (278.1, 440.9) = 5 35 27.71 -5 42 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.5 +/- 9.9
  Background counts = 9.9
  Rate = 0.002 +/- 0.0004

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 10.43'
[Fri May 31 21:40:53 2013] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 11.65"
[Fri May 31 21:40:53 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 89 for pass 0, mean size = 11.65"
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src89.ximg exists
[Fri May 31 21:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src89.csv
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src89_1.ximg exists
[Fri May 31 21:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src89.csv
[Fri May 31 21:40:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:58 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Fri May 31 21:40:58 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Fri May 31 21:40:58 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Fri May 31 21:42:13 2013] Source 40 is offset by 0.649744 and 1.695227 pixels which is larger than
2 X fitted extent = 1.338377 x 1.338377, not incorporating fit results
[Fri May 31 21:42:13 2013] Warning: source 89 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 11.850387 pixels away
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 11.65"
[Fri May 31 21:43:20 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 82 for pass 1, mean size = 11.65"
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src82.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src82.csv
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src82_1.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src82.csv
[Fri May 31 21:43:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Fri May 31 21:43:24 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly
[Fri May 31 21:44:36 2013] Warning: source 82 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 11.850511 pixels away
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:25 2013] XMMSAS src. selection expression = ellipse(24143.943756, 38309.207397, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 04:58:25 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src40_src.reg
[Sat Jun  1 04:58:25 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (241, 403) - (316, 478)
[Sat Jun  1 04:58:25 2013] XMMSAS bgd. selection expression = annulus(24143.943756, 38309.207397, 1087.500000, 2175.000000, X, Y) && !ellipse(27096.864685, 38744.297668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22772.748566, 36503.317535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23012.479126, 41242.616516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23183.080688, 38126.182953, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:25 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src40.gif
[Sat Jun  1 05:33:56 2013] Mean detx,y = (-13725.98, 782.78) 
[Sat Jun  1 05:33:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:34:12 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:34:12 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jun  1 05:34:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Jun  1 07:59:29 2013] Not generating rmf since there are only 52 counts
[Sat Jun  1 07:59:29 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:05:01 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:05:01 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 116.00
[Sat Jun  1 08:05:01 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 429.00
[Sat Jun  1 08:05:01 2013] Got source and background scale factors 1263924.000000, 8909532.000000
[Sat Jun  1 08:05:01 2013] User source parameters:
  Position = (278.1, 440.9) = 5 35 27.71 -5 42 54.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 55.1 +/- 11.8
  Background aperture counts = 60.9
  Rate = 0.002 +/- 0.0005

[Sat Jun  1 08:05:01 2013] Updating counts from extracted products
[Sat Jun  1 08:05:01 2013] Set source signif. to 55.14/7.80 = 7.07
[Sat Jun  1 08:05:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:11 2013] Using photon index=1.80, rate=0.00244, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src40.arf
[Sat Jun  1 08:05:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:11 2013] Updating source flux to 7e-14
[Sat Jun  1 08:05:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete