[Fri May 31 21:39:03 2013] Detection parameters:
  Position = (312.0, 445.9) = 5 35 17.82 -5 42 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 580.6 +/- 29.3
  Background counts = 10.3
  Rate = 0.03 +/- 0.001

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 10.74'
[Fri May 31 21:40:53 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Fri May 31 21:40:53 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.80"
[Fri May 31 21:40:54 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src10.ximg exists
[Fri May 31 21:40:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src10.csv
[Fri May 31 21:40:54 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri May 31 21:40:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src10.csv
[Fri May 31 21:40:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri May 31 21:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 31 21:40:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 31 21:40:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 570.731000, observed total counts = 660.000000
[Fri May 31 21:42:12 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 11.80"
[Fri May 31 21:43:20 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.872
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 11.80"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 31 21:43:21 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 31 21:43:22 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri May 31 21:44:35 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 15.424610 pixels away
[Fri May 31 21:44:36 2013] Source 37 is offset by -7.360958 and -1.729130 pixels which is larger than
2 X fitted extent = 1.327917 x 1.327917, not incorporating fit results
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:23 2013] XMMSAS src. selection expression = ellipse(27096.864685, 38744.297668, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_src.reg
[Sat Jun  1 04:58:23 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (275, 408) - (350, 483)
[Sat Jun  1 04:58:23 2013] XMMSAS bgd. selection expression = annulus(27096.864685, 38744.297668, 1087.500000, 2175.000000, X, Y) && !ellipse(28173.958000, 37895.755200, 359.833610, 359.833610, 0.000000, X, Y) && !ellipse(28737.664825, 37885.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24143.943756, 38309.207397, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37.gif
[Sat Jun  1 04:58:27 2013] ../../xmm0112660101/products/events/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_src.evt and ../../xmm0112660101/products/events/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_bgd.evt exist, delete to re-create
[Sat Jun  1 04:58:27 2013] Mean detx,y = (-14249.99, -2241.88) 
[Sat Jun  1 04:58:27 2013] ../../xmm0112660101/products/images/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_src.img and ../../xmm0112660101/products/images/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_bgd.img exist, delete to re-create
[Sat Jun  1 04:58:27 2013] ../../xmm0112660101/products/spectra/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_bgd.pi exist, delete to re-create
[Sat Jun  1 04:58:27 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Jun  1 04:58:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Jun  1 04:58:27 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_bgd.lc exist, delete to re-create
[Sat Jun  1 06:31:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 06:31:10 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:04:36 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:37 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 600.00
[Sat Jun  1 08:04:37 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_bgd.pi.gz = 439.00
[Sat Jun  1 08:04:37 2013] Got source and background scale factors 1327180.000000, 9277556.000000
[Sat Jun  1 08:04:37 2013] User source parameters:
  Position = (312.0, 445.9) = 5 35 17.82 -5 42 33.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 537.2 +/- 25.5
  Background aperture counts = 62.8
  Rate = 0.02 +/- 0.001

[Sat Jun  1 08:04:37 2013] Updating counts from extracted products
[Sat Jun  1 08:04:37 2013] Set source signif. to 537.20/7.92 = 67.79
[Sat Jun  1 08:05:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:06 2013] Using photon index=1.80, rate=0.0238, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37.arf
[Sat Jun  1 08:05:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:06 2013] Updating source flux to 7.4e-13
[Sat Jun  1 08:05:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete