[Fri May 31 21:39:03 2013] Detection parameters:
  Position = (319.2, 178.2) = 5 35 15.74 -6 1 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.2 +/- 15.4
  Background counts = 7.9
  Rate = 0.01 +/- 0.001

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 8.84'
[Fri May 31 21:40:53 2013] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 10.85"
[Fri May 31 21:40:53 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 10.85"
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src24.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src24.csv
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src24.csv
[Fri May 31 21:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 31 21:40:56 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 230.000000, observed total counts = 230.000000
[Fri May 31 21:42:12 2013] Offset between fit and detection position for source 35 = 0.416263 pixels
[Fri May 31 21:42:12 2013] 231.507800 total counts/ 144.943000 bgd. counts: snr = 7.190229
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.416263 pixels
  Position = (319.6, 178.3) = 5 35 15.62 -6 1 58.0
  Extent = 4.9 (3.8-6.1)", rotation angle = 0
  Source counts = 86.6 +/- 15.2
  Background counts = 144.9
  Rate = 0.004 +/- 0.0007
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 4.88"
[Fri May 31 21:43:20 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.856
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 4.88"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src24.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src24.csv
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src24_1.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src24.csv
[Fri May 31 21:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Fri May 31 21:43:22 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Fri May 31 21:44:35 2013] Spatial fit model total counts = 230.000000, observed total counts = 230.000000
[Fri May 31 21:44:35 2013] Offset between fit and detection position for source 35 = 0.001168 pixels
[Fri May 31 21:44:35 2013] 231.515400 total counts/ 145.108000 bgd. counts: snr = 7.173073
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.001168 pixels
  Position = (319.6, 178.3) = 5 35 15.62 -6 1 58.0
  Extent = 4.9 (3.8-6.1)", rotation angle = 0
  Source counts = 86.4 +/- 15.2
  Background counts = 145.1
  Rate = 0.004 +/- 0.0007
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:24 2013] XMMSAS src. selection expression = ellipse(27753.247800, 15466.132800, 291.534608, 291.534608, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src35_src.reg
[Sat Jun  1 04:58:24 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (303, 162) - (336, 195)
[Sat Jun  1 04:58:24 2013] XMMSAS bgd. selection expression = annulus(27753.247800, 15466.132800, 485.891014, 971.782028, X, Y) && !ellipse(29305.864990, 15751.029755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25622.602200, 14808.500000, 1721.040050, 1721.040050, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src35.gif
[Sat Jun  1 05:04:11 2013] Mean detx,y = (8977.45, -3483.39) 
[Sat Jun  1 05:04:14 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:04:29 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:04:30 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Sat Jun  1 05:04:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sat Jun  1 07:08:00 2013] Not generating rmf since there are only 86 counts
[Sat Jun  1 07:08:00 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:04:41 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:41 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 104.00
[Sat Jun  1 08:04:41 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 83.00
[Sat Jun  1 08:04:41 2013] Got source and background scale factors 229972.000000, 1491020.000000
[Sat Jun  1 08:04:41 2013] User source parameters:
  Position = (319.6, 178.3) = 5 35 15.62 -6 1 58.0
  Extent = 4.9 (3.8-6.1)", rotation angle = 0
  Source aperture counts = 91.2 +/- 11.2
  Background aperture counts = 12.8
  Rate = 0.004 +/- 0.0005

[Sat Jun  1 08:05:07 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:07 2013] Using photon index=1.80, rate=0.00383, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src35.arf
[Sat Jun  1 08:05:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:07 2013] Updating source flux to 1.1e-13
[Sat Jun  1 08:05:42 2013] Source 35 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete