[Fri May 31 21:39:03 2013] Detection parameters:
  Position = (266.2, 225.2) = 5 35 31.17 -5 58 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 291.7 +/- 21.2
  Background counts = 11.1
  Rate = 0.02 +/- 0.001

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 5.80'
[Fri May 31 21:40:53 2013] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 9.33"
[Fri May 31 21:40:53 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.894
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 9.33"
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src16.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src16.csv
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src16.csv
[Fri May 31 21:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri May 31 21:40:56 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 504.734000, observed total counts = 482.000000
[Fri May 31 21:42:12 2013] Offset between fit and detection position for source 30 = 0.121930 pixels
[Fri May 31 21:42:12 2013] 380.909000 total counts/ 183.645000 bgd. counts: snr = 14.556544
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.121930 pixels
  Position = (266.3, 225.3) = 5 35 31.16 -5 58 33.5
  Extent = 5.3 (4.7-6.0)", rotation angle = 0
  Source counts = 197.3 +/- 19.5
  Background counts = 183.6
  Rate = 0.009 +/- 0.0009
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 5.30"
[Fri May 31 21:43:20 2013] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.762
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 5.30"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src16.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src16.csv
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src16.csv
[Fri May 31 21:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Fri May 31 21:43:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:44:35 2013] Spatial fit model total counts = 588.789000, observed total counts = 482.000000
[Fri May 31 21:44:35 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:23 2013] XMMSAS src. selection expression = ellipse(23117.138800, 19555.886200, 317.946009, 317.946009, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src30_src.reg
[Sat Jun  1 04:58:23 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (248, 207) - (285, 244)
[Sat Jun  1 04:58:23 2013] XMMSAS bgd. selection expression = annulus(23117.138800, 19555.886200, 529.910015, 1059.820030, X, Y) && !ellipse(23990.972167, 18745.306734, 474.796741, 385.724420, 12.745597, X, Y) && !ellipse(22577.479060, 18891.771400, 398.393611, 398.393611, 0.000000, X, Y) && !ellipse(22053.634868, 20517.857598, 1592.016046, 1381.998232, 0.000000, X, Y) && !ellipse(22902.404266, 18343.780029, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src30.gif
[Sat Jun  1 05:00:21 2013] Mean detx,y = (5022.62, 1277.08) 
[Sat Jun  1 05:00:23 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:00:37 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:00:37 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Jun  1 05:00:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Jun  1 08:04:38 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:38 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 228.00
[Sat Jun  1 08:04:39 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src30_bgd.pi.gz = 36.00
[Sat Jun  1 08:04:39 2013] Got source and background scale factors 320000.000000, 667148.000000
[Sat Jun  1 08:04:39 2013] User source parameters:
  Position = (266.3, 225.3) = 5 35 31.16 -5 58 33.5
  Extent = 5.3 (4.7-6.0)", rotation angle = 0
  Source aperture counts = 210.7 +/- 16.1
  Background aperture counts = 17.3
  Rate = 0.009 +/- 0.0007

[Sat Jun  1 08:05:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:06 2013] Using photon index=1.80, rate=0.00874, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src30.arf
[Sat Jun  1 08:05:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:06 2013] Updating source flux to 1.6e-13
[Sat Jun  1 08:05:42 2013] Flag p found in src. 30 procflags, skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete