[Fri May 31 21:39:01 2013] Detection parameters:
  Position = (298.4, 327.9) = 5 35 21.79 -5 51 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1973.1 +/- 53.8
  Background counts = 11.5
  Rate = 0.1 +/- 0.003

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 2.14'
[Fri May 31 21:40:53 2013] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 7.50"
[Fri May 31 21:40:53 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.011
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.50"
[Fri May 31 21:40:54 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src2.ximg exists
[Fri May 31 21:40:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src2.csv
[Fri May 31 21:40:54 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May 31 21:40:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src2.csv
[Fri May 31 21:40:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 31 21:40:56 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 1868.000000, observed total counts = 1868.000000
[Fri May 31 21:42:12 2013] Offset between fit and detection position for source 3 = 0.227510 pixels
[Fri May 31 21:42:12 2013] 1861.846000 total counts/ 446.836000 bgd. counts: snr = 66.939957
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.227510 pixels
  Position = (298.2, 327.9) = 5 35 21.85 -5 51 7.4
  Extent = 5.6 (5.3-5.9)", rotation angle = 0
  Source counts = 1415.0 +/- 43.1
  Background counts = 446.8
  Rate = 0.06 +/- 0.002
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 5.61"
[Fri May 31 21:43:20 2013] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.248
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 5.61"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src2.csv
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src2.csv
[Fri May 31 21:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 31 21:43:22 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May 31 21:44:35 2013] Spatial fit model total counts = 1868.000000, observed total counts = 1868.000000
[Fri May 31 21:44:35 2013] Offset between fit and detection position for source 3 = 0.000134 pixels
[Fri May 31 21:44:35 2013] 1861.890000 total counts/ 446.490000 bgd. counts: snr = 66.984346
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000134 pixels
  Position = (298.2, 327.9) = 5 35 21.85 -5 51 7.4
  Extent = 5.6 (5.3-5.9)", rotation angle = 0
  Source counts = 1415.4 +/- 43.1
  Background counts = 446.5
  Rate = 0.06 +/- 0.002
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:23 2013] Counts = 1415.400000, rescaling region sizes by 2.000000
[Sat Jun  1 04:58:23 2013] XMMSAS src. selection expression = ellipse(25894.029820, 28477.814000, 674.046019, 674.046019, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun  1 04:58:23 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (259, 289) - (337, 367)
[Sat Jun  1 04:58:23 2013] XMMSAS bgd. selection expression = annulus(25894.029820, 28477.814000, 2246.820065, 4493.640129, X, Y) && !ellipse(24686.649800, 24317.214800, 1385.220040, 1385.220040, 0.000000, X, Y) && !ellipse(24413.054871, 31404.439972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23768.376504, 30029.293256, 475.420292, 329.387868, 351.863904, X, Y) && !ellipse(27990.305400, 27780.419240, 376.038411, 376.038411, 0.000000, X, Y) && !ellipse(23582.583200, 31330.166400, 567.997616, 567.997616, 0.000000, X, Y) && !ellipse(26028.998600, 25113.158000, 550.836016, 550.836016, 0.000000, X, Y) && !ellipse(27976.642780, 30328.805640, 301.756009, 301.756009, 0.000000, X, Y) && !ellipse(28258.202600, 27232.813400, 339.036810, 339.036810, 0.000000, X, Y) && !ellipse(23437.132020, 28284.976000, 388.904811, 388.904811, 0.000000, X, Y) && !ellipse(30048.131800, 25332.948400, 491.277614, 491.277614, 0.000000, X, Y) && !ellipse(27096.879980, 30307.486400, 368.897611, 368.897611, 0.000000, X, Y) && !ellipse(26869.138800, 24898.195600, 233.107207, 233.107207, 0.000000, X, Y) && !ellipse(24854.356400, 28501.317200, 465.040813, 465.040813, 0.000000, X, Y) && !ellipse(24576.856000, 25328.558000, 1099.488032, 669.004019, 120.097800, X, Y) && !ellipse(30185.113600, 27263.810800, 295.268008, 295.268008, 0.000000, X, Y) && !ellipse(25396.918457, 26826.553497, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3.gif
[Sat Jun  1 04:58:26 2013] ../../xmm0112660101/products/events/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0112660101/products/events/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Sat Jun  1 04:58:27 2013] Mean detx,y = (-3958.11, -1285.66) 
[Sat Jun  1 04:58:27 2013] ../../xmm0112660101/products/images/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_src.img and ../../xmm0112660101/products/images/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Sat Jun  1 04:58:27 2013] ../../xmm0112660101/products/spectra/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0112660101/products/spectra/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Sat Jun  1 04:58:27 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun  1 04:58:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun  1 04:58:27 2013] ../../xmm0112660101/products/lightcurves/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0112660101/products/lightcurves/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Sat Jun  1 08:04:33 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:33 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 1805.00
[Sat Jun  1 08:04:33 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 2387.00
[Sat Jun  1 08:04:33 2013] Got source and background scale factors 1419940.000000, 36239218.000000
[Sat Jun  1 08:04:33 2013] User source parameters:
  Position = (298.2, 327.9) = 5 35 21.85 -5 51 7.4
  Extent = 5.6 (5.3-5.9)", rotation angle = 0
  Source aperture counts = 1711.5 +/- 43.5
  Background aperture counts = 93.5
  Rate = 0.08 +/- 0.002

[Sat Jun  1 08:05:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:06 2013] Using photon index=1.80, rate=0.0627, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3.arf
[Sat Jun  1 08:05:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:06 2013] Updating source flux to 9.2e-13
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete