[Fri May 31 21:39:03 2013] Detection parameters:
  Position = (312.8, 227.0) = 5 35 17.59 -5 58 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 336.5 +/- 22.6
  Background counts = 10.8
  Rate = 0.02 +/- 0.001

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 5.28'
[Fri May 31 21:40:53 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Fri May 31 21:40:53 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.123
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 9.07"
[Fri May 31 21:40:54 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src13.ximg exists
[Fri May 31 21:40:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src13.csv
[Fri May 31 21:40:54 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri May 31 21:40:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src13.csv
[Fri May 31 21:40:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri May 31 21:40:56 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri May 31 21:42:12 2013] Warning, spatial fit 13 centroid is now closest to src. 84
[Fri May 31 21:42:12 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.250324 pixels away
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Fri May 31 21:43:20 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.123
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 9.07"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src13.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src13.csv
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src13.csv
[Fri May 31 21:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May 31 21:43:22 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri May 31 21:44:35 2013] Spatial fit model total counts = 400.774000, observed total counts = 394.000000
[Fri May 31 21:44:35 2013] Offset between fit and detection position for source 29 = 0.060920 pixels
[Fri May 31 21:44:35 2013] 399.932000 total counts/ 159.248000 bgd. counts: snr = 19.072614
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.060920 pixels
  Position = (312.8, 227.1) = 5 35 17.58 -5 58 25.9
  Extent = 5.5 (4.9-6.1)", rotation angle = 0
  Source counts = 240.7 +/- 20.0
  Background counts = 159.2
  Rate = 0.01 +/- 0.0009
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:23 2013] XMMSAS src. selection expression = ellipse(27169.243040, 19708.214000, 329.658009, 329.658009, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src29_src.reg
[Sat Jun  1 04:58:23 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (294, 208) - (332, 246)
[Sat Jun  1 04:58:23 2013] XMMSAS bgd. selection expression = annulus(27169.243040, 19708.214000, 549.430016, 1098.860032, X, Y) && !ellipse(25282.330048, 18273.881073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.025513, 21272.809677, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src29.gif
[Sat Jun  1 04:58:54 2013] Mean detx,y = (4766.08, -2775.04) 
[Sat Jun  1 04:58:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 04:59:11 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 04:59:12 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jun  1 04:59:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jun  1 08:04:37 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:38 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 272.00
[Sat Jun  1 08:04:38 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 147.00
[Sat Jun  1 08:04:38 2013] Got source and background scale factors 342400.000000, 2658580.000000
[Sat Jun  1 08:04:38 2013] User source parameters:
  Position = (312.8, 227.1) = 5 35 17.58 -5 58 25.9
  Extent = 5.5 (4.9-6.1)", rotation angle = 0
  Source aperture counts = 253.1 +/- 17.5
  Background aperture counts = 18.9
  Rate = 0.01 +/- 0.0008

[Sat Jun  1 08:05:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:06 2013] Using photon index=1.80, rate=0.0107, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src29.arf
[Sat Jun  1 08:05:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:06 2013] Updating source flux to 2e-13
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete