[Fri May 31 21:39:03 2013] Detection parameters:
  Position = (446.5, 236.9) = 5 34 38.60 -5 57 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.5 +/- 12.5
  Background counts = 7.2
  Rate = 0.004 +/- 0.0006

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 11.62'
[Fri May 31 21:40:53 2013] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 12.24"
[Fri May 31 21:40:53 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.956
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 12.24"
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src65.ximg exists
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src65_1.ximg exists
[Fri May 31 21:40:55 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src65 appears to have run properly
[Fri May 31 21:40:57 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Fri May 31 21:40:57 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Fri May 31 21:40:57 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Fri May 31 21:42:12 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.726666 pixels away
[Fri May 31 21:42:12 2013] Spatial fit model total counts = 162.359000, observed total counts = 160.000000
[Fri May 31 21:42:12 2013] Offset between fit and detection position for source 26 = 0.400827 pixels
[Fri May 31 21:42:12 2013] 162.572700 total counts/ 83.541300 bgd. counts: snr = 8.646674
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.400827 pixels
  Position = (446.3, 236.6) = 5 34 38.66 -5 57 44.4
  Extent = 10.7" x 5.7", rotation angle = 90
  Source counts = 79.0 +/- 12.8
  Background counts = 83.5
  Rate = 0.004 +/- 0.0006
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.86
[Fri May 31 21:42:13 2013] Source is asymmetric
[Fri May 31 21:43:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 8.21"
[Fri May 31 21:43:20 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.097
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 64 for pass 1, mean size = 8.21"
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src64.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src64.csv
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src64_1.ximg exists
[Fri May 31 21:43:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src64.csv
[Fri May 31 21:43:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Fri May 31 21:43:24 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Fri May 31 21:43:24 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Fri May 31 21:44:36 2013] Spatial fit model total counts = 151.999000, observed total counts = 152.000000
[Fri May 31 21:44:36 2013] Offset between fit and detection position for source 26 = 0.326250 pixels
[Fri May 31 21:44:36 2013] 152.247900 total counts/ 81.796200 bgd. counts: snr = 7.789775
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.326250 pixels
  Position = (446.4, 236.9) = 5 34 38.64 -5 57 43.0
  Extent = 6.8 (5.5-9.0)", rotation angle = 0
  Source counts = 70.5 +/- 12.3
  Background counts = 81.8
  Rate = 0.003 +/- 0.0005
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major axis lower bound
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:25 2013] XMMSAS src. selection expression = ellipse(38788.189200, 20563.133080, 407.892012, 407.892012, 0.000000, X, Y)
[Sat Jun  1 04:58:25 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src26_src.reg
[Sat Jun  1 04:58:25 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (423, 213) - (470, 260)
[Sat Jun  1 04:58:25 2013] XMMSAS bgd. selection expression = annulus(38788.189200, 20563.133080, 679.820020, 1359.640039, X, Y) && !ellipse(37081.224487, 22332.462402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40245.557434, 21869.113327, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:25 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src26.gif
[Sat Jun  1 05:24:20 2013] Mean detx,y = (3615.71, -14372.49) 
[Sat Jun  1 05:24:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:24:37 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:24:38 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Jun  1 05:24:38 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Jun  1 07:51:29 2013] Not generating rmf since there are only 70 counts
[Sat Jun  1 07:51:29 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:04:54 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:54 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 92.00
[Sat Jun  1 08:04:54 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 167.00
[Sat Jun  1 08:04:54 2013] Got source and background scale factors 528780.000000, 4035384.000000
[Sat Jun  1 08:04:54 2013] User source parameters:
  Position = (446.4, 236.9) = 5 34 38.64 -5 57 43.0
  Extent = 6.8 (5.5-9.0)", rotation angle = 0
  Source aperture counts = 70.1 +/- 10.6
  Background aperture counts = 21.9
  Rate = 0.003 +/- 0.0005

[Sat Jun  1 08:05:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:10 2013] Using photon index=1.80, rate=0.00312, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src26.arf
[Sat Jun  1 08:05:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:10 2013] Updating source flux to 1.3e-13
[Sat Jun  1 08:05:42 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete