[Fri May 31 21:39:02 2013] Detection parameters:
  Position = (200.4, 319.9) = 5 35 50.35 -5 51 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.3 +/- 20.0
  Background counts = 8.3
  Rate = 0.02 +/- 0.001

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 7.28'
[Fri May 31 21:40:53 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Fri May 31 21:40:53 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.947
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.07"
[Fri May 31 21:40:54 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src15.ximg exists
[Fri May 31 21:40:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src15.csv
[Fri May 31 21:40:54 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src15.csv
[Fri May 31 21:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri May 31 21:40:56 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri May 31 21:40:56 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Fri May 31 21:42:12 2013] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.054077 pixels away
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 10.07"
[Fri May 31 21:43:20 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.947
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.07"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src15.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src15.csv
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri May 31 21:43:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src15.csv
[Fri May 31 21:43:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri May 31 21:43:22 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri May 31 21:44:35 2013] Warning, spatial fit 15 centroid is now closest to src. 58
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:23 2013] XMMSAS src. selection expression = ellipse(17388.427475, 27786.941315, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src19_src.reg
[Sat Jun  1 04:58:23 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (163, 282) - (238, 357)
[Sat Jun  1 04:58:23 2013] XMMSAS bgd. selection expression = annulus(17388.427475, 27786.941315, 1087.500000, 2175.000000, X, Y) && !ellipse(18524.187943, 30502.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19083.622840, 28572.154200, 276.246408, 276.246408, 0.000000, X, Y) && !ellipse(19261.600940, 29727.875800, 335.109610, 335.109610, 0.000000, X, Y)
[Sat Jun  1 04:58:23 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src19.gif
[Sat Jun  1 04:59:42 2013] Mean detx,y = (-3063.12, 7214.70) 
[Sat Jun  1 04:59:45 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:00:14 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:00:15 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun  1 05:00:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Jun  1 06:46:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 06:46:57 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:04:38 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:38 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 307.00
[Sat Jun  1 08:04:38 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src19_bgd.pi.gz = 482.00
[Sat Jun  1 08:04:38 2013] Got source and background scale factors 1280084.000000, 10187876.000000
[Sat Jun  1 08:04:38 2013] User source parameters:
  Position = (200.4, 319.9) = 5 35 50.35 -5 51 41.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 246.4 +/- 18.5
  Background aperture counts = 60.6
  Rate = 0.01 +/- 0.0008

[Sat Jun  1 08:04:38 2013] Updating counts from extracted products
[Sat Jun  1 08:04:38 2013] Set source signif. to 246.44/7.78 = 31.67
[Sat Jun  1 08:05:06 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:06 2013] Using photon index=1.80, rate=0.0109, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src19.arf
[Sat Jun  1 08:05:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:06 2013] Updating source flux to 1.8e-13
[Sat Jun  1 08:05:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete