[Fri May 31 21:39:02 2013] Detection parameters:
  Position = (437.5, 372.0) = 5 34 41.24 -5 47 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 183.2 +/- 16.5
  Background counts = 7.2
  Rate = 0.008 +/- 0.0007

[Fri May 31 21:39:09 2013] Off-axis axis estimate = 11.41'
[Fri May 31 21:40:53 2013] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:40:53 2013] Initial guess for spatial extent in simple fitting = 12.13"
[Fri May 31 21:40:53 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.971
[Fri May 31 21:40:53 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 12.13"
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src35.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src35.csv
[Fri May 31 21:40:55 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri May 31 21:40:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src35.csv
[Fri May 31 21:40:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 21:40:57 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri May 31 21:40:57 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri May 31 21:40:57 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri May 31 21:42:12 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.381184 pixels away
[Fri May 31 21:42:13 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:42:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:42:13 2013] Assessing source extent using major
[Fri May 31 21:42:13 2013] Source does appear to be extended
[Fri May 31 21:42:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 21:43:20 2013] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Fri May 31 21:43:20 2013] Initial guess for spatial extent in simple fitting = 12.13"
[Fri May 31 21:43:20 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.971
[Fri May 31 21:43:20 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 12.13"
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src35.ximg exists
[Fri May 31 21:43:21 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri May 31 21:43:21 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_src35 appears to have run properly
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri May 31 21:43:22 2013] fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri May 31 21:43:22 2013] Fit fullrun_mos1_xmm0112660101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Fri May 31 21:44:35 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 15.397632 pixels away
[Fri May 31 21:44:36 2013] Vigneting correction estimate = 1.000000
[Fri May 31 21:44:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 21:44:36 2013] Assessing source extent using major
[Fri May 31 21:44:36 2013] Source does appear to be extended
[Fri May 31 21:44:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  1 04:58:24 2013] XMMSAS src. selection expression = ellipse(38013.694672, 32314.711456, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Not overwriting source region fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun  1 04:58:24 2013] Extracting stamp from image fullrun_mos1_xmm0112660101_pi300-10000_cl_sm2.00.img.gz, (400, 334) - (475, 409)
[Sat Jun  1 04:58:24 2013] XMMSAS bgd. selection expression = annulus(38013.694672, 32314.711456, 1087.500000, 2175.000000, X, Y) && !ellipse(36184.780396, 34051.785614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38363.391235, 29540.670471, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  1 04:58:24 2013] Writing fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src11.gif
[Sat Jun  1 05:09:37 2013] Mean detx,y = (-8126.15, -13274.74) 
[Sat Jun  1 05:09:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  1 05:10:05 2013] Binned source spectrum to 10 counts/bin
[Sat Jun  1 05:10:05 2013] Setting source spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun  1 05:10:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun  1 07:20:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun  1 07:20:17 2013] rmf not generated due to insufficient counts
[Sat Jun  1 08:04:44 2013] Updating aperture counts using extracted products
[Sat Jun  1 08:04:44 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 226.00
[Sat Jun  1 08:04:44 2013] Total counts from fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 346.00
[Sat Jun  1 08:04:44 2013] Got source and background scale factors 1329600.000000, 9413347.000000
[Sat Jun  1 08:04:44 2013] User source parameters:
  Position = (437.5, 372.0) = 5 34 41.24 -5 47 56.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 177.1 +/- 16.1
  Background aperture counts = 48.9
  Rate = 0.008 +/- 0.0007

[Sat Jun  1 08:04:44 2013] Updating counts from extracted products
[Sat Jun  1 08:04:44 2013] Set source signif. to 177.13/6.99 = 25.34
[Sat Jun  1 08:05:08 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun  1 08:05:08 2013] Using photon index=1.80, rate=0.00785, arf fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src11.arf
[Sat Jun  1 08:05:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  1 08:05:08 2013] Updating source flux to 3.1e-13
[Sat Jun  1 08:05:42 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun  1 08:06:13 2013] xmm0112660101/analysis//spectral/fullrun_mos1_xmm0112660101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete