[Wed Aug  1 23:05:56 2012] Detection parameters:
  Position = (192.4, 201.1) = 12 31 46.07 20 39 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.8 +/- 13.3
  Background counts = 7.5
  Rate = 0.005 +/- 0.0006

[Wed Aug  1 23:05:56 2012] Off-axis axis estimate = 10.43'
[Wed Aug  1 23:33:46 2012] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 23:33:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  1 23:33:46 2012] Initial guess for spatial extent in simple fitting = 11.64"
[Wed Aug  1 23:33:46 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.040
[Wed Aug  1 23:33:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.64"
[Wed Aug  1 23:51:48 2012] fullrun_mos1_xmm0112650101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug  1 23:51:48 2012] fullrun_mos1_xmm0112650101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug  1 23:51:48 2012] Fit fullrun_mos1_xmm0112650101_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Aug  1 23:51:48 2012] fullrun_mos1_xmm0112650101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug  1 23:51:48 2012] fullrun_mos1_xmm0112650101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug  1 23:51:48 2012] Fit fullrun_mos1_xmm0112650101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Aug  2 00:07:35 2012] Spatial fit model total counts = 144.497000, observed total counts = 144.000000
[Thu Aug  2 00:07:35 2012] Offset between fit and detection position for source 2 = 0.283123 pixels
[Thu Aug  2 00:07:35 2012] 145.403500 total counts/ 52.913000 bgd. counts: snr = 12.714987
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.283123 pixels
  Position = (192.6, 201.4) = 12 31 46.02 20 39 13.9
  Extent = 8.1 (6.6-10.3)", rotation angle = 0
  Source counts = 92.5 +/- 12.1
  Background counts = 52.9
  Rate = 0.004 +/- 0.0005
[Thu Aug  2 00:07:35 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 00:07:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 00:07:35 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 00:07:35 2012] Source does appear to be extended
[Thu Aug  2 00:07:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 00:30:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 00:30:51 2012] Initial guess for spatial extent in simple fitting = 8.13"
[Thu Aug  2 00:30:51 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.113
[Thu Aug  2 00:30:51 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.13"
[Thu Aug  2 00:49:06 2012] fullrun_mos1_xmm0112650101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Aug  2 00:49:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112650101_pi300-10000_cl_pass1_src3.csv
[Thu Aug  2 00:49:06 2012] fullrun_mos1_xmm0112650101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Aug  2 00:49:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112650101_pi300-10000_cl_pass1_src3.csv
[Thu Aug  2 00:49:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112650101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112650101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 00:49:06 2012] fullrun_mos1_xmm0112650101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Aug  2 00:49:06 2012] fullrun_mos1_xmm0112650101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Aug  2 00:49:06 2012] Fit fullrun_mos1_xmm0112650101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Aug  2 01:06:44 2012] Warning, spatial fit 3 centroid is now closest to src. 13
[Thu Aug  2 01:06:44 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 01:06:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 01:06:44 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 01:06:44 2012] Source does appear to be extended
[Thu Aug  2 01:06:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 01:19:36 2012] XMMSAS src. selection expression = ellipse(16704.567000, 17472.671000, 488.071214, 488.071214, 0.000000, X, Y)
[Thu Aug  2 01:19:36 2012] Writing source region out to fullrun_mos1_xmm0112650101_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug  2 01:19:36 2012] Extracting stamp from image fullrun_mos1_xmm0112650101_pi300-10000_cl_sm2.00.img.gz, (165, 173) - (221, 229)
[Thu Aug  2 01:19:36 2012] XMMSAS bgd. selection expression = annulus(16704.567000, 17472.671000, 813.452023, 1626.904047, X, Y)
[Thu Aug  2 01:19:36 2012] Writing fullrun_mos1_xmm0112650101_pi300-10000_pass1_cl_src2.gif
[Thu Aug  2 01:20:07 2012] Mean detx,y = (-5557.64, -13146.64) 
[Thu Aug  2 01:20:08 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 01:20:16 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 01:20:16 2012] Setting source spectrum file to fullrun_mos1_xmm0112650101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  2 01:20:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112650101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug  2 01:23:12 2012] Not generating rmf since there are only 92 counts
[Thu Aug  2 01:23:12 2012] rmf not generated due to insufficient counts
[Thu Aug  2 01:34:23 2012] Updating aperture counts using extracted products
[Thu Aug  2 01:34:23 2012] Error reading totcts from fullrun_mos1_xmm0112650101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  2 01:34:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 01:34:23 2012] Using photon index=1.80, rate=0.00393, arf fullrun_mos1_xmm0112650101_pi300-10000_pass1_cl_src2.arf
[Thu Aug  2 01:34:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 01:34:23 2012] Updating source flux to 1.1e-13
[Thu Aug  2 01:34:24 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Aug  2 01:34:25 2012] xmm0112650101/analysis//spectral/fullrun_mos1_xmm0112650101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete