[Thu Jun 13 19:25:08 2013] Detection parameters:
  Position = (305.8, 322.6) = 5 41 45.16 -1 54 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2314.4 +/- 58.0
  Background counts = 75.5
  Rate = 0.1 +/- 0.003

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 1.83'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Thu Jun 13 19:28:25 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.35"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 13 22:01:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Spatial fit model total counts = 4103.650000, observed total counts = 3490.000000
[Fri Jun 14 05:18:20 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 05:18:20 2013] Source 7 is offset by -1.840242 and -4.244885 pixels which is larger than
2 X fitted extent = 5.947311 x 2.588115, not incorporating fit results
[Fri Jun 14 05:18:20 2013] Source 7 is offset by 1.673702 and 3.780816 pixels which is larger than
2 X fitted extent = 6.442391 x 3.205660, not incorporating fit results
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Fri Jun 14 05:19:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.044
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.35"
[Fri Jun 14 08:29:48 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jun 14 08:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src7.csv
[Fri Jun 14 08:29:48 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jun 14 08:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src7.csv
[Fri Jun 14 08:29:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:43 2013] Spatial fit model total counts = 4290.710000, observed total counts = 3490.000000
[Fri Jun 14 14:55:43 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 14:55:44 2013] Spatial fit model total counts = 2237.000000, observed total counts = 2234.000000
[Fri Jun 14 14:55:44 2013] Offset between fit and detection position for source 7 = 1.787355 pixels
[Fri Jun 14 14:55:44 2013] Warning, changing simple spatial fit ID from 7 to 47
[Fri Jun 14 14:55:44 2013] 2125.464000 total counts/ 1359.460000 bgd. counts: snr = 20.775325
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.787355 pixels
  Position = (304.5, 321.4) = 5 41 45.54 -1 54 14.8
  Extent = 14.0 (14.0-28.0)" x 7.3 (6.5-8.3)", rotation angle = 103 (97-111) degrees
  Source counts = 766.0 +/- 46.1
  Background counts = 1359.5
  Rate = 0.03 +/- 0.002
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.69
[Fri Jun 14 14:55:44 2013] Source is asymmetric
[Fri Jun 14 14:55:44 2013] Source is confused with source 52
[Fri Jun 14 14:56:35 2013] XMMSAS src. selection expression = ellipse(26439.352000, 27916.988000, 840.732024, 436.198213, 103.098000, X, Y)
[Fri Jun 14 14:56:35 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src7_src.reg
[Fri Jun 14 14:56:35 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (256, 273) - (353, 370)
[Fri Jun 14 14:56:35 2013] XMMSAS bgd. selection expression = annulus(26439.352000, 27916.988000, 1401.220040, 2802.440081, X, Y) && !ellipse(26498.060300, 30737.162200, 693.644020, 467.766413, 113.139481, X, Y) && !ellipse(28369.380402, 30471.218414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28674.222000, 29196.362000, 515.424015, 398.710411, 12.578100, X, Y) && !ellipse(28783.594177, 28629.522827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23365.794495, 26800.972290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29102.341064, 29713.212860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.115234, 28790.595490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.695587, 28801.239502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25487.008911, 28199.867401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23064.900024, 28374.263000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28344.879791, 27852.377167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.740753, 27709.204712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23126.252441, 27737.260406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29755.950867, 27377.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.261536, 27628.244904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.382233, 27283.664581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.085200, 27267.185800, 1178.184034, 880.672025, 84.470510, X, Y) && !ellipse(24451.056305, 26629.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26742.206000, 26711.952000, 1062.440031, 1062.440031, 0.000000, X, Y) && !ellipse(28595.708374, 26295.964478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29479.484000, 25508.158000, 294.554408, 294.554408, 0.000000, X, Y) && !ellipse(25627.838600, 25771.178800, 419.721612, 419.721612, 0.000000, X, Y) && !ellipse(25688.370000, 25769.868000, 438.058413, 355.128810, 0.025395, X, Y) && !ellipse(24230.208313, 25110.077057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.437400, 24968.108200, 352.871210, 352.871210, 0.000000, X, Y) && !ellipse(29357.770813, 24338.233490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.785800, 23951.857800, 1217.048035, 459.720013, 65.799500, X, Y)
[Fri Jun 14 14:56:35 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src7.gif
[Fri Jun 14 15:06:18 2013] Mean detx,y = (-692.72, -567.21) 
[Fri Jun 14 15:06:20 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:06:36 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:06:36 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jun 14 15:06:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jun 14 23:51:55 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:51:55 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 2619.00
[Fri Jun 14 23:51:56 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 1561.00
[Fri Jun 14 23:51:56 2013] Got source and background scale factors 1002824.000000, 5311407.000000
[Fri Jun 14 23:51:56 2013] User source parameters:
  Position = (304.5, 321.4) = 5 41 45.54 -1 54 14.8
  Extent = 14.0 (14.0-28.0)" x 7.3 (6.5-8.3)", rotation angle = 103 (97-111) degrees
  Source aperture counts = 2324.3 +/- 52.2
  Background aperture counts = 294.7
  Rate = 0.1 +/- 0.002

[Fri Jun 14 23:52:19 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:19 2013] Using photon index=1.80, rate=0.0321, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src7.arf
[Fri Jun 14 23:52:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:19 2013] Updating source flux to 1.4e-13
[Fri Jun 14 23:53:34 2013] Flag b found in src. 7 procflags, skipping spectral fitting
[Fri Jun 14 23:53:34 2013] Flag p found in src. 7 procflags, skipping spectral fitting
[Fri Jun 14 23:53:34 2013] Flag c found in src. 7 procflags, skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete