[Thu Jun 13 19:25:09 2013] Detection parameters:
  Position = (338.0, 280.3) = 5 41 35.81 -1 57 12.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230.3 +/- 21.4
  Background counts = 67.5
  Rate = 0.01 +/- 0.0009

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 3.16'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 8.01"
[Thu Jun 13 19:28:25 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.913
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 64 for pass 0, mean size = 8.01"
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src64.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src64.csv
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src64_1.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src64.csv
[Thu Jun 13 22:01:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Thu Jun 13 22:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Warning, spatial fit 64 centroid is now closest to src. 63
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 8.01"
[Fri Jun 14 05:19:14 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.913
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 8.01"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src61.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src61.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src61.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:51 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri Jun 14 08:29:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Fri Jun 14 08:29:51 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri Jun 14 08:29:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Fri Jun 14 08:29:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:44 2013] Source 68 is offset by -7.358956 and 6.669350 pixels which is larger than
2 X fitted extent = 0.920257 x 0.920257, not incorporating fit results
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:37 2013] XMMSAS src. selection expression = ellipse(29357.770813, 24338.233490, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:37 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src68_src.reg
[Fri Jun 14 14:56:37 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (301, 243) - (376, 318)
[Fri Jun 14 14:56:37 2013] XMMSAS bgd. selection expression = annulus(29357.770813, 24338.233490, 1087.500000, 2175.000000, X, Y) && !ellipse(29755.950867, 27377.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.085200, 27267.185800, 1178.184034, 880.672025, 84.470510, X, Y) && !ellipse(26742.206000, 26711.952000, 1062.440031, 1062.440031, 0.000000, X, Y) && !ellipse(28595.708374, 26295.964478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29479.484000, 25508.158000, 294.554408, 294.554408, 0.000000, X, Y) && !ellipse(27055.437400, 24968.108200, 352.871210, 352.871210, 0.000000, X, Y) && !ellipse(26687.785800, 23951.857800, 1217.048035, 459.720013, 65.799500, X, Y) && !ellipse(26755.191800, 23816.884000, 430.589612, 299.348809, 10.310100, X, Y)
[Fri Jun 14 14:56:37 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src68.gif
[Fri Jun 14 15:43:23 2013] Mean detx,y = (2495.88, 2688.97) 
[Fri Jun 14 15:43:25 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:43:47 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:43:47 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Fri Jun 14 15:43:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Fri Jun 14 18:58:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 18:58:09 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:08 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:08 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 434.00
[Fri Jun 14 23:52:08 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src68_bgd.pi.gz = 1838.00
[Fri Jun 14 23:52:08 2013] Got source and background scale factors 1280464.000000, 8374011.000000
[Fri Jun 14 23:52:08 2013] User source parameters:
  Position = (338.0, 280.3) = 5 41 35.81 -1 57 12.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 153.0 +/- 21.9
  Background aperture counts = 281.0
  Rate = 0.006 +/- 0.0009

[Fri Jun 14 23:52:08 2013] Updating counts from extracted products
[Fri Jun 14 23:52:08 2013] Set source signif. to 152.95/16.76 = 9.12
[Fri Jun 14 23:52:23 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:23 2013] Using photon index=1.80, rate=0.00641, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src68.arf
[Fri Jun 14 23:52:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:23 2013] Updating source flux to 2.6e-14
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete