[Thu Jun 13 19:25:09 2013] Detection parameters:
  Position = (279.1, 289.2) = 5 41 52.91 -1 56 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.0 +/- 21.4
  Background counts = 65.9
  Rate = 0.01 +/- 0.001

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 1.56'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 7.21"
[Thu Jun 13 19:28:25 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 7.21"
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src62.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src62.csv
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src62_1.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src62.csv
[Thu Jun 13 22:01:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu Jun 13 22:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Spatial fit model total counts = -675.152000, observed total counts = 446.000000
[Fri Jun 14 05:18:20 2013] Poor agreement between spatial fit and data for source 66
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 7.21"
[Fri Jun 14 05:19:14 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 7.21"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src59.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src59.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src59_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src59.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:44 2013] Source 66 is offset by 6.692601 and 5.806035 pixels which is larger than
2 X fitted extent = 3.491154 x 0.893430, not incorporating fit results
[Fri Jun 14 14:55:44 2013] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 66 at 28.945790 pixels away
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:37 2013] XMMSAS src. selection expression = ellipse(24230.208313, 25110.077057, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:37 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src66_src.reg
[Fri Jun 14 14:56:37 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (242, 252) - (317, 327)
[Fri Jun 14 14:56:37 2013] XMMSAS bgd. selection expression = annulus(24230.208313, 25110.077057, 1087.500000, 2175.000000, X, Y) && !ellipse(26439.352000, 27916.988000, 1120.976032, 581.597617, 103.098000, X, Y) && !ellipse(23365.794495, 26800.972290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23126.252441, 27737.260406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.382233, 27283.664581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.085200, 27267.185800, 1178.184034, 880.672025, 84.470510, X, Y) && !ellipse(24451.056305, 26629.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26742.206000, 26711.952000, 1062.440031, 1062.440031, 0.000000, X, Y) && !ellipse(25627.838600, 25771.178800, 419.721612, 419.721612, 0.000000, X, Y) && !ellipse(21606.538840, 25239.261200, 507.770306, 507.770306, 0.000000, X, Y) && !ellipse(25688.370000, 25769.868000, 438.058413, 355.128810, 0.025395, X, Y) && !ellipse(26687.785800, 23951.857800, 1217.048035, 459.720013, 65.799500, X, Y) && !ellipse(26755.191800, 23816.884000, 430.589612, 299.348809, 10.310100, X, Y)
[Fri Jun 14 14:56:37 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src66.gif
[Fri Jun 14 15:42:31 2013] Mean detx,y = (-2713.07, 2428.57) 
[Fri Jun 14 15:42:34 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:42:52 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:42:53 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Fri Jun 14 15:42:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Fri Jun 14 18:55:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 18:55:26 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:07 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:07 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src66_src_b10.pi.gz = 332.00
[Fri Jun 14 23:52:08 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src66_bgd.pi.gz = 1603.00
[Fri Jun 14 23:52:08 2013] Got source and background scale factors 1086078.000000, 6628728.000000
[Fri Jun 14 23:52:08 2013] User source parameters:
  Position = (279.1, 289.2) = 5 41 52.91 -1 56 34.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 69.4 +/- 19.2
  Background aperture counts = 262.6
  Rate = 0.003 +/- 0.0008

[Fri Jun 14 23:52:08 2013] Updating counts from extracted products
[Fri Jun 14 23:52:08 2013] Set source signif. to 69.36/16.21 = 4.28
[Fri Jun 14 23:52:23 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:23 2013] Using photon index=1.80, rate=0.00291, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src66.arf
[Fri Jun 14 23:52:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:23 2013] Updating source flux to 1.4e-14
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src66_pl.csv not found, spectral fit skipped or did not complete